How to repair the leakage of Foshan toilet water tank

If it is found that the toilet water tank leaks, it is probably an internal sealing problem. Before considering maintenance, you should close the water inlet pipe and drain the water tank to ensure your safety. The following are some problems that may cause the toilet tank to leak, and how to fix them:

1. The common problem that causes water leakage in water tanks is poor sealing of rubber gates or valves. In this case, you need to carefully check whether the seal is worn or damaged. If so, you should replace them.

You may also find that there is something wrong with the connection between the water storage tower of the water tank and the main pipe. This may be due to the accumulation of substances composed of scale and dirt, or the corrosion and aging of pipeline joints. Clean the sealing point to eliminate this factor, or replace the seal for maintenance.

3. If there is no problem with the sealing point, you may need to check the regulating device of the water pipe controller. It may be necessary to adjust the communication valve so that it can properly close and replace the old pull rod and other parts.

4. In other cases, if the water leakage of the water tank persists, you may need to check the integrity of the water tank wall and replace the damaged water tank.

Generally speaking, it is not difficult to repair the leakage problem of toilet water tank, as long as the cause is determined and appropriate measures are taken to realize the repair. If you are not sure how to repair it, or encounter other problems, it is recommended to contact a professional toilet maintenance service for maintenance.

Please refer to the following process for details:

1. Close the water inlet, plug the valve and drain the water tank.

2. Wipe off the residual water in the water tank with a rice cloth. If there is a lot of residual water, you can pour it into a plastic bucket or bathtub and clean it up.

3. Remove the water tank cover. Generally speaking, the water tank cover can be unscrewed, which is very simple. If you are worried about getting stuck, you can clamp the sides with nail clippers or pliers and twist them.

4. Observe the sealing parts of the gate, leaking pipe and water storage tower. Check for any signs of cracking or aging. If damage is found, replace the corresponding parts. If there is dirt on the connecting valve or leaking pipe, you can clean it with a brush.

5. Adjust the parts. If the communication valve is not closed correctly, the document handle needs to be rotated by a certain angle to make it rise normally. You should clean and fill the connection between the water storage tower and the main pipe, and reinstall the water tank cover before the adjustment is completed. After this operation, you can reopen everything and check the water leakage. If the problem has been solved, you can continue to use the water tank. Otherwise, you need to repeat these steps to ensure that no parts in the water storage bucket are damaged.