Don't get excited before you get ready to close the house, and accept these 9 tricks to inspect the house!

Closing the house is definitely an exciting day, which means that the house you have been waiting for for for a long time can finally move in, but many people don't know that closing the house is also very important. After all, it has been built for so long, what remains to be seen. Today, Bian Xiao, don't get excited when you are ready to close your house. Take these 9 tricks and share them with you. I hope I can help you.

I. Tools/raw materials:

Identity document

related data

Related expenses (house price settlement, property management fees, public maintenance funds, etc.). )

House inspection tools (basin, small hammer, 5m tape measure, flashlight, etc. )

Second, the developer and the property check the owner's materials and the process of repossession.

1. The owner shall receive the completion acceptance record form, the residential quality guarantee, the residential instruction manual (these three items must be original), the technical report of housing land surveying and mapping, and the as-built map of pipeline distribution (water, strong electricity, weak electricity and structure), and the developer shall explain it.

2. When it comes to the details of house inspection, although the professionalism of house inspection is strong, careful owners can also personally inspect houses from the following aspects.

A, look at the doors and windows

Check the quality of the house in detail, including whether there are cracks in doors, windows, balconies, etc., and then carefully check whether both sides of the door (the contact line with the wall) are filled with styrofoam and sealed with sealant. Whether the door is opened and closed smoothly, whether the installation is firm, whether the gap between the door and the lock is too large, and whether there is sound when opening and closing the door. Then, check whether the window frame opens the water outlet, whether the window lock is closed normally and whether the shock absorber is installed. The glass is pollution-free and undamaged, the double-layer glass interlayer is dust-free and moisture-free, and the partition is flat.

B, look at the wall and the top surface.

Check the ceiling, walls and floors for cracks. If you know a little about architecture, you can knock on the wall with a small hammer to check whether there is an empty drum on the wall. Check whether the yin and yang corner lines of the roof and wall are horizontal. If not, in the later decoration, first use plastering gypsum to find a low elevation and then use water-resistant putty to level it.

Look at the ground

Check whether the ground is flat. Check whether there is anti-sand phenomenon on the ground: to detect anti-sand, you can determine the ground problem by rubbing the ground with your feet.

D, check the waterway

Waterways are mainly embodied in kitchens and bathrooms. There are generally two floor drains in the bathroom, 1 toilet drain, 1 bathtub drain and 1 washbasin drain. The specific situation should be decided according to the needs of your own decoration.

E, check the circuit

Check whether each light switch and power socket can be used normally. You can get a mobile phone charger or plug in an electric pen to know if there is electricity.

F, gas pipeline

The gas meter is a very small thing and takes up a lot of space. How to adjust the position of this instrument depends on the opinions of professionals. It is important that these changes must be made by the gas company. Check whether the pipes and joints of gas and heating, especially the appearance of the instrument, are damaged and whether the measurement is started from scratch.

G, waterproof test

In addition to seeing whether the kitchen and bathroom pipes are leaking, we should also do the closed water experiment of the kitchen and bathroom pipes in conjunction with the upstairs owners to prevent the upstairs pipes from leaking after the renovation, which will affect our home. The waterproof acceptance method is: use cement mortar as the bottom beam to block the bathroom door, then cover the drain with plastic bags and tie them up. Then drain the water in the toilet, just shallow (the water level is more than 2cm). After that, arrange the property manager downstairs and the owner to check whether there is water leakage in the ceiling of their toilet after 24 hours.

H, pipeline inspection

At the time of acceptance, take a container of water in advance, and then pour the water into the drain. See if the water flows smoothly. Why do you accept this? Because in the process of engineering construction, workers often "steal" this job when cleaning, and pour some cement slag into the drainage pipe to flow away. If the cement is sticky, it will block at the elbow, causing drainage problems.

3. In the process of house acceptance, if there are quality problems and minor quality problems within the scope stipulated by the state can be repaired, it is suggested that the owner can get the house key first, on the one hand, carry out maintenance, on the other hand, let the decoration company enter the site for decoration in advance without delay. If there are too many quality problems, such as water and electricity problems, wall and ground problems, you can find the developer to repair and rectify first, and then sign and accept the house after it is qualified. In the process of repossession, we must be cautious and know how to use the law to safeguard our legitimate rights and interests.