Office decoration Construction Standards and Precautions

The unified construction standard in office decoration is stipulated by the state, but most decoration companies will have their own construction standards, but they must also abide by the basic provisions of the state and cannot violate the relevant provisions of the state.

Leveling operation

Office decoration's first job is to level the ground. If the ground is uneven, it will have a certain impact on the office floor decoration.

Farr code

If there is a new space in the room (the partition is capped), according to the fire code, a separate smoke detector must be added, which can be done by general building maintenance units. If this item and the above item are not changed well, you will not be able to pass the property acceptance.

Precautions for suspended ceiling

If the office needs a suspended ceiling, Shandong Shandong Airlines Decoration reminds that according to the fire protection code, all indoor sprinklers must expose the suspended ceiling to a certain size and keep it level. Ceiling, whether it is asbestos board or mineral wool board, should be hung with screw tie rods, so as to be durable. It is absolutely not allowed to hang with wire.

Network cabling

According to the decoration requirements, all wires that need to be threaded in the decoration network wiring must use steel pipes and iron boxes.

Weak current conversion

For weak current transformation (including network cable and telephone line), pay attention to the cable label when paying off, so as to prevent trouble for later maintenance work.

Furniture installation

After the furniture enters the site, the strong and weak wiring needs to be installed at the position of each employee together with the office partition, and it is not allowed to pull it indiscriminately, otherwise it will easily cause safety and use hidden dangers.