Waxing method of Jinhua ordinary floor

The waxing method of Jinhua common floor includes the following steps:

1. Cleaning the floor: Before waxing, the floor must be cleaned to ensure that the wax can fully adhere to the floor. Use a vacuum cleaner or broom to clean the dust, hair and other debris on the ground.

2. Cleaning the floor: Use a mixture of mild detergent and water to clean the floor. Pour the mixture on the floor, dip it with a mop, and then wipe the floor. Then, wipe the floor with clean water to make it completely dry.

3. Waxing the floor: spread the wax evenly on the floor with a wax brush or towel. Make sure you pay attention to all corners and edges. Almost all types of floors can use wax, including wood floors, stone floors and floor tiles.

4. Polishing the floor: Once the wax is coated on the floor, you need to wait a few minutes to let it penetrate the floor surface completely. Use a polisher or mop to polish the floor. It's best to use a polishing machine, because it can finish the task faster.

5. Repeat the above steps: If you want a better effect, you can repeat the above steps, wax and polish again.

6. Regular maintenance: The effect of wax is not permanent. It is recommended to carry out regular maintenance every 3-6 months to keep the floor smooth.

The above is the process of normal floor waxing method in Jinhua. Proper waxing can make the floor more beautiful and have a longer service life.