Installation method of central air conditioning in Country Garden

As a large real estate enterprise, Country Garden has been adhering to the concept of "better quality" in property management services, and is committed to creating a more comfortable, safer and healthier living environment for owners. Among them, central air conditioning is an indispensable service in property management services, which can not only meet the comfort needs of owners, but also improve the quality and market value of the whole community. So, how to install the central air conditioner in Country Garden? Let's introduce it below.

The installation method of Country Garden central air conditioner mainly includes the following steps:

The first step is to determine the location of the main engine room and the extension. Before installing the central air conditioner, the location of the main engine room and the extension should be determined according to the actual situation. The main computer room is generally located in the basement or on the roof, and the extensions are distributed in each room. The main engine room should be close to the drain and the place where the power supply is convenient for equipment installation and maintenance, and the extension position should take into account the design of the air outlet of the air conditioner, so as to avoid the wind of furniture and other things blowing in and affecting the air conditioning effect.

Step two, prepare the air conditioning pipes. After determining the location of the main engine room, air conditioning pipelines, including copper pipes, insulating pipes, drainage pipes and power lines, should be prepared in advance. These pipelines should be accurately measured and calculated according to the requirements of design drawings, and the specific length, rotation angle and support position of each pipeline should be determined.

Step three, lay the pipeline. After the pipeline position is reserved according to the design requirements, the pipeline can be laid. Pipes in the main engine room should be installed according to the equipment installation specifications, and attention should be paid to keeping vertical and stable to prevent long-term vibration from affecting the unit equipment. At the joint length, the pipeline shall be arranged according to the design requirements, and the pipeline height and bracket position of each joint length shall be determined.

Step 4, wire routing. Wiring is another important link in installing central air conditioning. After the pipeline layout is completed, connect the power cord to the power port of the main engine room, and connect the extended part with the wires of the main engine room to ensure the power supply required for the normal operation of the air conditioner.

Step 5, install air conditioning equipment. After all pipelines are laid, air conditioning equipment can be installed. In this process, it is necessary to pay attention to the position and height of the air conditioner hanging, to maintain the stability of the air conditioner unit, and to ensure that the equipment and pipelines will not be loose due to the vibration of the unit and the expansion and contraction of the pipeline.

Step 6, test the system. After all installation work is completed, the system should be tested and debugged to ensure the stable and normal operation of air conditioning equipment. During the test, it is necessary to check the current and voltage of the air-conditioning main unit when it is running, check the air flow and cold-heat exchange capacity between the extensions, detect the pipeline resistance in the air-conditioning system, and repair it in time when problems are found.

To sum up, the installation method of Country Garden central air-conditioning needs to follow certain technical specifications and operating procedures, so as to ensure the air-conditioning equipment to run stably, save electricity and be practical in daily use. At the same time, it can also provide better property services and a more comfortable living environment for owners.