Size standard of elevator shaft in office building

In fact, there is no fixed standard for the size of elevator shaft, and the final size is usually determined according to the elevator type selection. The size standard of elevator shaft in general office buildings should be about 1600× 1400 mm, but this is not a fixed size. Some elevator shafts are larger, so the size will be larger. If there are more than two elevators in a hoistway, it is necessary to install a guide rail in the middle, and at the same time, it is necessary to have a center beam or a 200×90 mm channel steel. The length of the guide rail is generally controlled at about 5 meters, and the installation spacing of the center beam in the up and down direction should be more than 2 meters, depending on the size of the elevator installed.

What is the advertising fee standard for office elevators?

There is no specific standard for advertising charges on office elevators. It depends on how the advertising company charges. Some advertising companies may charge by the day, some may charge by the month, and some may charge according to different categories of electronic videos or electronic pictures, depending on the standards of the advertising companies that charge. However, generally, a month 1000 yuan to 2000 yuan. Pay attention to when placing advertisements, and be sure to check the authenticity and effectiveness of advertisements to avoid sending wrong information to consumers.

What does the office building mean?

Office building refers to office building, which is a commercial office building with modern facilities. Strictly speaking, office buildings are not suitable for living. There are two popular evaluation standards for office buildings in the market, one is 5a-level office buildings, and the other is Grade A office buildings. Office buildings are generally large in scale, with complete hardware facilities, advanced services and efficient property management software.