How to transform a bad apartment?

1, the division of functional areas is not obvious. You can skillfully divide functional areas by using partitions, glass or thick decorative curtain materials, so that it will not occupy too much space and will not interfere with each other when using, which is very convenient.

2. "L" apartment will easily form a long and narrow passage, which will divide the space on the flow route taken by people after entering the door. According to the decoration of the top and wall, the walkway can become a beautiful decorative space, which can be made into a pattern art wall to enjoy, or a photo wall to commemorate. In addition, the corner of the apartment can be transformed into a storage space to solve the problem of insufficient storage function in the living room.

3. If the lighting is not good, you can brighten it with color. You can use bright materials for indoor walls, floors or ceilings through soft decoration design, such as sky blue, bright yellow, pink white and other colors, so that the whole room has a clear and bright visual effect.

4. If the story height is too low, don't use all suspended ceilings, and use local or non-suspended ways to decorate the roof. Don't use heavy floors or tiles on the ground, use thinner paving materials. If it is soft, it is suitable for strip-shaped three-dimensional decoration, which can effectively stretch the space and enhance the three-dimensional visual effect of the space.

What are the unchangeable parts of the house?

1, waterproof layer

These places have waterproof layers underground. If they are destroyed, the downstairs will become "water curtain cave". So when you replace the floor material, you must be careful not to destroy the waterproof layer. If it is rebuilt after destruction, it must be waterproof again. After the "48-hour infiltration test", no water leakage is qualified.

2. load-bearing wall

In brick-concrete buildings, as long as they are prefabricated walls, they are not allowed to dismantle or open doors and windows; Brick walls over 24cm are load-bearing walls and cannot be removed. Most of the "empty sound" walls are non-bearing walls and can be demolished and changed. Some bad engineering teams open doors and windows on the load-bearing wall, which will also destroy the load-bearing of the wall, and there are potential safety hazards. Before construction, it must be reported to the property management department for the record, and construction can only be started after approval.

3. Low wall beside the balcony

Generally speaking, there is a door and a window between the room and the balcony. These doors or windows can be removed and modified, but the low wall under the window cannot be moved. This section of the wall is called the "counterweight wall", which plays the role of provoking the balcony. Demolition and alteration of this wall will reduce the bearing capacity of the balcony, and the balcony will fall, with unpredictable consequences. The door frame of the "three-proof" or "five-proof" door is embedded in concrete. If they are removed, it will destroy the building structure and reduce the safety factor. But also destroyed the building structure at the entrance and increased the difficulty of reinstalling new doors.