According to the Fire Protection Law, should shopping malls be put into use after acceptance or after the first use?

According to the provisions of the Fire Protection Law, no matter whether a shopping mall is put into use after receiving the acceptance certificate or put into use first, according to the regulations, it is accepted first. After passing the acceptance, it applies for the opening inspection before opening, and it can only be opened after passing the opening inspection and issuing the fire inspection certificate before opening.

Thirteenth in accordance with the national technical standards for fire protection in engineering construction, fire protection design is needed after the completion of the construction project, and fire protection acceptance and filing shall be carried out in accordance with the following provisions:

(1) For the construction project specified in Article 11 of this Law, the construction unit shall apply to the fire control institution of the public security organ for fire control acceptance;

(two) other construction projects, the construction unit after acceptance, shall be reported to the public security organ fire control institutions for the record, the public security organ fire control institutions shall conduct spot checks.

Construction projects that should be subject to fire control acceptance according to law are prohibited from being put into use without fire control acceptance or unqualified fire control acceptance; Other construction projects that fail to pass random inspection according to law shall stop construction.

Fourteenth specific measures for fire design audit, fire acceptance, filing and spot check of construction projects shall be formulated by the public security department of the State Council.

Fifteenth public gathering places put into use and business, the construction unit or user shall apply to the local people's public security organs at or above the county level for fire safety inspection.

The fire control institution of the public security organ shall, within ten working days from the date of accepting the application, conduct fire safety inspection on the place according to the technical standards and management regulations on fire control. Without fire safety inspection or inspection does not meet the requirements of fire safety, it shall not be put into use or business.

Opening the business first violates the fifth paragraph below.

Article 58 Whoever, in violation of the provisions of this Law, commits any of the following acts shall be ordered to stop construction, stop using or stop production and business, and be fined between 30,000 yuan and 300,000 yuan:

(a) the construction project that should be audited by the fire control institution of the public security organ according to law has not been audited according to law or has not passed the audit;

(two) the fire protection design has not been accepted by the fire department of the public security organ according to law, and the construction has not stopped;

(three) the construction project that should be subject to fire inspection according to law has not been put into use without fire inspection or fire inspection is unqualified;

(four) after the construction project is put into use, the fire department of the public security organ fails to pass the spot check according to law and does not stop using it;

(five) the public gathering place without fire safety inspection or inspection does not meet the requirements of fire safety, unauthorized use, business.

If the construction unit fails to report the fire control design documents to the fire control institutions of public security organs for the record according to the provisions of this law, or fails to report them to the fire control institutions of public security organs for the record according to the provisions of this law after completion, it shall be ordered to make corrections within a time limit and be fined not more than 5,000 yuan.

The project acceptance that can be put into use after acceptance by the Employer means that the project quality can be put into use only after comprehensive acceptance by planning, environmental protection, fire protection, land management and archives departments.

Whether the developer should show the fire acceptance certificate should be based on

Twenty-fifth fire control institutions of public security organs shall, after receiving the fire protection filing declaration of fire protection design and completion acceptance, issue a filing certificate if the filing materials are complete; If the filing materials are incomplete or inconsistent with the statutory form, it shall inform all the contents that need to be corrected on the spot or within five days.

The fire control institutions of public security organs shall randomly determine the inspection objects in the fire control design and completion acceptance projects that have been filed and announce them to the public. After determining the inspection object, the fire control institution of the public security organ shall, within 20 days, complete the drawing inspection in accordance with the fire control regulations and the national technical standards for fire control of engineering construction, or complete the engineering inspection in accordance with the acceptance and evaluation standards for fire control of construction projects, and make inspection records. The inspection results shall be announced to the public, and the construction unit shall be notified in writing if the inspection is unqualified.

After receiving the notice, the construction unit shall stop the construction or use, and apply to the fire control institution of the public security organ for review after rectification. The fire control institution of the public security organ shall conduct a review within 20 days from the date of receiving the written application, and issue a written review opinion.

Construction, design and construction units shall not modify the fire protection design of construction projects that have been filed according to law without authorization. If it is really necessary to modify, the construction unit shall re-declare the fire protection design for the record.

The comprehensive acceptance certificate of the house includes fire protection, but does not. This is a comprehensive acceptance that can only be carried out after the fire inspection, but first there must be fire inspection opinions or filing certificates.

Please contact the local fire department to report the unqualified fire control acceptance of the hospital. Reporting is generally divided into telephone reporting and letter reporting. Complaints and reports are generally accepted by the county fire brigade (department) or the legal department of the fire department of the municipal fire department, and the provincial fire department can contact the technical department of the fire department. According to the fire protection law, organize inspection and verification within 3 days after receiving the report, and inform the informant.

In addition, 1 19 is a fire alarm telephone, and complaints and reports are generally not accepted.

Shanghai Juru Fire Engineering Acceptance Certificate? The training of fire-fighting engineering specialty meets the needs of fire-fighting work in the 2 1 century, with all-round development in morality, intelligence, physique and aesthetics, solid foundation, wide knowledge, strong ability, high quality and innovative spirit. Have the knowledge and ability to master the basic theory of fire science, industrial products and their production processes, fire safety technology and engineering methods of various facilities and devices, as well as fire laws and regulations, fire prevention and extinguishing engineering technology, fire investigation and fire fighting and rescue. High-level professionals who can engage in fire-related teaching, scientific research and engineering design, fire management, fire investigation and organization and command in colleges and universities, scientific research and design institutes, fire departments of enterprises and institutions and public security fire forces.

How to punish the provisions of the Fire Protection Law if the fire protection fails to pass the acceptance test and is put into use?

Article 58 Whoever, in violation of the provisions of this Law, commits any of the following acts shall be ordered to stop construction, stop using or stop production and business, and be fined between 30,000 yuan and 300,000 yuan:

(a) the construction project that should be audited by the fire control institution of the public security organ according to law has not been audited according to law or has not passed the audit;

(two) the fire protection design has not been accepted by the fire department of the public security organ according to law, and the construction has not stopped;

(three) the construction project that should be subject to fire inspection according to law has not been put into use without fire inspection or fire inspection is unqualified;

(four) after the construction project is put into use, the fire department of the public security organ fails to pass the spot check according to law and does not stop using it;

(five) the public gathering place without fire safety inspection or inspection does not meet the requirements of fire safety, unauthorized use, business.

If the construction unit fails to report the fire control design documents to the fire control institutions of public security organs for the record according to the provisions of this law, or fails to report them to the fire control institutions of public security organs for the record according to the provisions of this law after completion, it shall be ordered to make corrections within a time limit and be fined not more than 5,000 yuan.

What information do you need for fire acceptance? Sample of fire acceptance certificate 1. Application form.

2. Notice of approval of business license or name

3. Legal person certificate

4. Legal person ID card

5. Letter of appointment

6. Customer ID card

7. Fire audit opinion

8. Review and acceptance opinions of the building subject (property right and seal of the construction unit)

9. Final report

10. Decoration construction qualification certificate (business license and decoration construction qualification certificate)

1 1. Fire fighting construction qualification certificate (business license and fire fighting construction qualification certificate)

12. Supervision qualification certificate (business license and supervision qualification certificate) or no supervision certificate (seal of the construction unit)

13. Commissioning certificate of fire protection system (seal of fire protection and construction unit)

14. Performance certificate of fire protection products (seal of property company and construction unit)

15. as-built plan

16. Fire fighting completion drawing

What documents do you need to apply for the hotel fire acceptance certificate? What information do you need?

1, project approval, planning and design requirements, survey red line map of urban construction planning department, fire protection audit declaration form of building fire protection design, outdoor fire water supply general plan and general plan;

2, a full set of civil engineering, structure, water, electricity, HVAC and fire protection system drawings (drawings folded, loaded into the file);

3. The design of building fire protection facilities must be undertaken by a legally qualified unit. Drawings must have the number of design certificate, the name of design unit, the signatures of designers and auditors, and be stamped with the special seal for design, and a self-examination form for engineering fire protection design shall be issued;

4. A copy of the corresponding qualification certificate of the design unit.

5. If it is a steel structure building, a structural drawing shall be submitted;

6 industrial buildings, the production process flow chart shall be submitted;

7. For buildings with automatic fire-fighting facilities (including heating and ventilation), it is necessary to fill in the application form for the design of automatic fire-fighting facilities and write a special article on fire-fighting design.

How long can I get the certificate of approval after the acceptance of the fire protection project? Thirteenth in accordance with the national technical standards for fire control in engineering construction, after the completion of the construction project, the fire control acceptance and filing shall be carried out in accordance with the following provisions:

(1) For the construction project specified in Article 11 of this Law, the construction unit shall apply to the fire control institution of the public security organ for fire control acceptance;

(two) other construction projects, the construction unit after acceptance, shall be reported to the public security organ fire control institutions for the record, the public security organ fire control institutions shall conduct spot checks.

Construction projects that should be subject to fire control acceptance according to law are prohibited from being put into use without fire control acceptance or unqualified fire control acceptance; Other construction projects that fail to pass random inspection according to law shall stop construction.

Article 14 Specific measures for fire protection design review, fire protection acceptance, filing and spot check of construction projects shall be formulated by the public security department of the State Council.

According to the regulations of the Fire Department of the Ministry of Public Security, the acceptance is within 5- 10 working days.