How to solve the seepage performance of residential buildings?

According to the specific water leakage situation. If there is water leakage upstairs and downstairs, it can be suggested that the property owner negotiate on his own. If one party does not accept the property mediation, it can suggest that the damaged owner solve it through law. If the public part leaks water, during the warranty period, the property can respond to the developer and demand maintenance compensation. Beyond the warranty period, it can be borne by the bus owner.

What are the causes of water leakage in houses?

1, pipeline leakage

First of all, water leakage in houses is common in pipes. For example, the pipeline is not fixed properly, loose, the nozzle is in the wrong position or the concrete pouring is not in place. It is suggested that the pipeline should be excavated again and waterproof should be redone to solve the problem fundamentally.

2, the waterproof layer leaks

Secondly, some users report that there is a waterproof layer at home, but it still leaks, which is caused by the destruction of the waterproof layer, and may even be caused by the quality problems of waterproof materials. In these cases, only by shoveling off the waterproof layer, re-waterproofing, and conducting a penetration test, can it be considered qualified until the test has no leakage.

3. Black spots appear on the wall floor.

In my previous life, when I lived in a house for a long time, there would be black spots on the wall, or there would be water leakage on the top and wall, especially in winter. If the wall was wet, it would even be moldy and hairy, which would not only affect the appearance, but also bring inconvenience to life. Most of the above situations are due to the fact that the construction personnel did not follow the specifications, or when pouring the floor slab, the concrete was not vibrated and compacted, so there will be problems such as empty drum, honeycomb and pits. It may also be a cement quality problem. It is suggested to find the leakage point and repair it according to the specification.