How to operate the first heating floor heating?

The first heating floor heating operation method is as follows:

1. First, make sure that the whole property has started heating. If it is a new house, let the property open the main valve.

When you enter the room, there will be a valve to control the room. If you feel too hot and dry, you can turn it off manually. The position of the valve is generally at the door of the door.

3. Find the control pipe of floor heating and screw the valve. Generally, valves are red. Just open them.

Matters needing attention in the first use of floor heating

1, floor heating should be gradual.

No matter what floor is used at home, there is a risk of thermal expansion and deformation. When using floor heating, it must be heated up gradually. When using geothermal heating for the first time, the temperature should be gradually increased three days before the heating starts. The water temperature is 18℃ on the first day, 25℃ on the second day, 30℃ on the third day and can rise to 45℃ on the fourth day.

When floor heating is used, the surface temperature should not exceed 30℃. This can not only meet the most suitable environmental temperature of human body, but also ensure the service life of the floor. When the floor heating system is restarted after a long period of non-use, it should be heated up gradually in strict accordance with the heating scheme.

2. Check whether there is water leakage.

For families with circulating system, before the circulating system runs for the first time, pressure test should be carried out on the pipeline system to see if there is water leakage, and problems should be handled in time.