Wall leakage and mildew and how to deal with them

Wall seepage is a common problem in building decoration, which may lead to cracking and mildew of the wall and cause major problems for the normal use of the building. Therefore, it is necessary to deal with the filtered water in the wall in time to prevent the emergence of mold and nip in the bud. Here, Bian Xiao introduces how to deal with leaking and moldy walls. And why.

How to deal with the leaking moldy wall?

1. The filtered water on the wall can be directly replaced or repaired: if it is a water pipe, it can be replaced or repaired with special tape for temporary maintenance. It is a concrete operation method, which includes: firstly, closing the valve, cutting off the water source, opening the faucet to ventilate most of the pressure in the water pipe, and then dripping the joint with special adhesive tape or sealing it with annular resin glue. life

2. Walls, water surfaces and molds can all be contacted with the property: but when they arrive at the outer wall, they will be reflected to the property, and the engineering department will be contacted to maintain the property.

3. Waterproof paint can be used for the water wall on the surface of the mold: the owner at home can buy waterproof paint to prevent leakage, and paint the wall and floor of the bathroom by himself, which is more professional and effective by asking the decorator to solve it. Or there is something wrong. Waterproof again.

Causes of wall leakage

1. The reason why water leaks into the wall may be that there is no insulation layer: many residential walls did not have insulation layer before. In winter, the temperature difference between indoor and outdoor is very large. Condensed water will form, making the wall wet, and it is the whole wall. This kind of situation usually only occurs in winter, and it will be better in summer, but the consequences will leave many ugly mildew spots, which will affect the beauty of the wall.

2. The reason for water leakage in the wall may be due to water pipe leakage in the wall: the wall is wet due to water pipe leakage embedded in the wall. Usually this happens near the bathroom, on the ceiling or wall of the room. Generally speaking, there is leakage at the joint of embedded water pipes, including whether there is leakage in the wall and upper water pipes of the house and whether there is leakage in the water in the wall. Partition infiltration.

3. Wall filtration may be a poor waterproof measure. The upper layer is not waterproof. The bathroom next door or the bathroom next door has poor waterproof performance. Once there is water in the bath, it will slowly penetrate. The joint between the water pipe and the ground on the second floor is not waterproof. There is likely to be water leakage near the pipeline, and water will flow through the pipeline, resulting in water leakage on the roof.

The above is about how to deal with the leaking moldy wall. I hope how to deal with the leaking moldy wall will help you.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~