Problems needing attention in waterway design

Waterway design should first consider all water-related equipment, such as water heaters, water purifiers, kitchen treasures, water softeners, washing machines, toilets and washbasins, their locations, installation methods and whether hot water is needed.

Selection of water heater

It is necessary to make good use of gas or electric water heaters in advance to avoid temporary replacement of water heaters, which will lead to repeated reconstruction of waterways.

Toilet drain pipe

In addition to the sockets such as washbasin, mop pool, toilet and washing machine, it is best to bring one out to facilitate water connection and floor flushing in the future.

Washing machine drainage

After the location of the washing machine is determined, the drainage pipe of the washing machine can be considered in the wall, which is both beautiful and convenient.

inhibition test

There should be a suppression test after the channel reconstruction. It is best to have the property on the spot to suppress the test, which can play a supervisory role, because some decoration teams will cheat the owners in this link.

Drainage protection

Pay attention to check whether the drains in the kitchen and bathroom are unobstructed when closing the house. If the drainage is slow, let the property clear in time. Protect the drain when decorating, especially when laying ceramic tiles in the kitchen and bathroom, which is most likely to cause cement to fall into the drain and cause blockage.

Floor drain drainage

After the kitchen and bathroom floor tiles are laid, it is necessary to drain to check whether the floor drain is unobstructed (the drainage speed after removing the upper cover of the floor drain shall prevail, because most deep-water sealed floor drains have the problem of slow drainage). If you want to close the redundant floor drain, you must block the gap between the drain pipe and the floor drain with glass glue or cement to prevent water from overflowing and smelling back.

Washing machine floor drain

It is best not to use deep-water sealed floor drain for washing machine floor drain, mainly because deep-water sealed floor drain has a common feature of slow drainage, which is used for deep-water sealed floor drain in shower rooms and other places. Because the displacement is not large, the floor drain can basically meet the drainage demand; However, the drainage speed of washing machine is very fast, which can not reach the drainage speed of deep-water floor drain at all, which directly leads to water overflow.