First heating and opening process

The first heating process is as follows:

1, apply for heating.

The new house with heating for the first time must go to the heating agency to apply for heating. If you are afraid of trouble, you can apply directly online. Online application is to directly search your city, and then search for heating application.

2. Let the property open the main heating valve.

After confirming that you have handled and applied for installing the heating meter, you can ask the property to help open the main heating valve, but you can only open the heating valve if the community has started to carry out comprehensive heating. The heating valve of the property controls all users in the community. After the property turns on the heating valve, there is also a heating valve at home, which is convenient to control the heating switch at home.

3, debugging heating

It is suggested that the temperature should be set at 25-30℃ for the first time, and it is best to adjust it after running at this temperature for one week, but the adjustment degree should not exceed 5 to 10, so as to improve the service life of floor heating. If the radiator is used at home, when debugging for the first time, you should first open the exhaust valve at the top to exhaust the air inside, and then open the heating valve to let the radiator heat up evenly.

What are the common heating methods?

1, floor heating

It is common to lay heating pipes on the ground at home, and the temperature of the whole space is raised by heating the pipes. Nowadays, many people choose this heating method mainly because it is beautiful, convenient and does not occupy space.

2. Radiator heating

It is to install a radiator on the wall to realize the regional function. Because this radiator is installed on the wall, it is more convenient to maintain and install.