Is there a good way to detect water leakage and seepage?

Generally, it is not easy for non-professionals to detect water leakage points, so they can find professionals to detect them. Generally, there are two kinds of water leakage: one is water leakage caused by pipeline rupture (including cold water pipes, hot water pipes, geothermal pipes, warm air pipes, etc.). ); Second, poor waterproof leads to water leakage. It is recommended that professional masters find water leakage points (around water pipes, the corner is a water leakage area); First, it is recommended to find a professional water pressure test to detect water pipe leakage by manual pressure test pump. Second, the water pipe leakage detection method: 1, the first thing to do is to close the main sluice. And then fixed at both ends of the hot and cold water pipes with hoses. 2. At the same time, fix one end of the instrument on another water pipe in the same space. 3. When using the instrument, the owner needs to tighten every interface to avoid air leakage, so that the measured water pressure will be accurate. 4. After everything is ready, you can be ready to test under pressure. 5. Gradually increase the water pressure and test the water pipe pressure to see if there is water leakage. 6. The inspector raised the water pressure. According to popular parlance, the water pressure at this time is 8 kg. 7. Check the water pipes everywhere to see if there is any water leakage. The inspector touched the water pipe with his hand to see if there was any dripping water. The whole water pressure measurement process takes 30 minutes. If there is no water leakage, there is nothing wrong with the pipeline.