Who should I ask to repair the broken light at home?

Your light is broken, you can find a property repairer or a special circuit repairman. However, even if the light in your house is broken and you find a property, the property is not responsible for maintenance, because it is not within the management scope of the property, and the owner needs to bear the maintenance costs himself.

How to fix the broken bedroom light?

To solve the problem of how to repair the broken lamp in the bedroom, first of all, we need to ensure that when the power supply of the lamp in the bedroom is cut off, we can borrow a ladder or stool, stand higher and raise our hands slightly to touch the lamp in the bedroom. Too high and too short is not convenient to operate. Open light in the bedroom's shell and see if the lamp is black or dark. If so, the lamp may be broken. This situation is the easiest to deal with. Just buy the same type of lamp and reinstall it. There is also a situation that is often encountered when solving the problem of how to repair the broken lamp in the bedroom, that is, there is no problem with the lamp tube of the lamp in the bedroom, but the contact between the lamp tube connector and the lamp tube is not bright. In this case, even the accessories don't need to be changed. Just try to tighten the lamp tube and connector to ensure that there is no shaking between them. If there are no problems in the above two aspects, it should be the ballast of the lamp. Generally speaking, the black mark on the surface of the ballast indicates that it has burned out and needs to be replaced with a new ballast.

What should I pay attention to when installing lamps?

1, check the lamps.

Before installation, carefully check whether the lamps and accessories are in good condition. If there are any problems such as breakage, damage, corrosion and deformation, it is necessary to replace the new lamp in time.

2, completes the safety protection measures

If the installation environment is humid, the installer should take relevant protective measures and the wire connector should be insulated. If it is not insulated, it is easy to have a short circuit problem in the future.

3. Install as needed

Be sure to standardize the operation when installing. When there are multiple wires, we need to distinguish their colors and mark the live wire and the zero wire for later maintenance.

4, lamps and lanterns installation should be strong.

When installing, the joint should be firmly connected and the screws must be tightened. After installation, timely check whether the installation is firm. If it is loose, it needs to be tightened again.

5, electricity test

After the bulb is installed, it needs to be turned on and energized. If the light bulb doesn't light up, it may be installed incorrectly or the light bulb is faulty and needs to be reinstalled. If the light bulb lights normally, you can install the lampshade.