202 1 Summary of Personal Work of Maintenance Electrician 5 articles

1.202 1 personal work summary of maintenance electrician

Since I graduated from technical secondary school in 20xx, I have worked hard in the post of maintenance electrician 13 years. Looking back on this ordinary year, I have the professional qualification certificate obtained by studying hard at my desk, the tireless guidance of teachers, the recognition of leaders and various honorary certificates brought by hard work! I believe that all these achievements are attributed to my belief that the working class is the leading class of the country and the fundamental force for building the cause of Socialism with Chinese characteristics. In response to the call of the Party and holding high the banner of building Socialism with Chinese characteristics's great theory, I have always adhered to the belief that I should improve my professional knowledge while abiding by the law and doing my duty, and strive to contribute to socialized mass production! This is also the guiding ideology of my work and life. Anyone who leaves his guiding ideology will accomplish nothing. I will summarize my professional and technical work since I took office as follows:

First, attach importance to theoretical study, guide practice with theory, and strive to improve their professional level.

Be sure to learn safety technology well on the basis of all electrical techniques. On this basis, we can boldly learn control technology. Whether it is an early electrician apprentice or a current electrician monitor, attaching importance to theoretical study is an important magic weapon to improve the professional level. When I was working in a shipyard in the early days, my master was so conservative about control technology that he almost killed me all the way. In this case, I am more and more keen on theoretical study. At that time, the salary was only 200, so I couldn't bear to eat, so I borrowed books to read. I remember borrowing an electrician's manual at that time, which was very thick, and I am most impressed now. At that time, because of the teacher's conservatism, contactors were not allowed to touch, so I drew a three-dimensional diagram of the contactor button of the milling machine on paper according to the instructions, and then connected the whole machine tool according to the instructions, which laid a good foundation for learning control technology in the future. I still remember it clearly, and my later study was more formal, and I participated in various trainings. Of course, due to the development of the network, the sharing of knowledge resources provides more convenience for our theoretical study! I've been good at learning from the Internet since 20xx, and I know how to help others design Q&A in Baidu this year. The adoption rate is 60%, which consolidates my knowledge at work and effectively guides practice!

Of course, I have a deep understanding that the so-called theory is not fixed in books, and theoretical things are not books. Teachers and lecturers can provide you with theoretical knowledge. Books are only a guide to systematically master knowledge, so you should be good at asking questions about knowledge, which will make it easier and faster to understand knowledge. One hour to read what you can understand, under the teacher's explanation, ten minutes may be enough, so be good at asking questions from both practice and theory.

No matter what company, there is something worth learning.

Everyone can make achievements. Many people always like to say this sentence when communicating: Wow, then your equipment is advanced. I really hope to work and study in your factory! What I want to say is that advanced equipment is not important. As mentioned above, although the master is conservative in control technology, he has learned a lot of basic knowledge and good working habits, such as the skilled use of tools, and the main points of disassembly and assembly of anchor machine, cable machine, generator, tachogenerator, sonar and radar system, which has broadened his horizons! Moreover, with more and more colleagues I know, I also have more opportunities to learn. Later, I came to my colleague's unit to help and was affirmed by the leaders of my colleague's unit. I can visit some modern equipment, such as dyeing machine and tenter, and even lend me the control drawings of the equipment. I cherish this short learning opportunity and have a general understanding of the control of the whole modern equipment at work, such as frequency converter, PLC and sensor. The same is true in the adult pharmaceutical industry in Ningbo. Through study and exploration, the PLC program of purified water was successfully reformed. In front of me, there are many electronic circuits in the equipment, so naturally there are many things to learn. The company has met the safety standards twice. Because the power supply system is not standardized and the information is not complete enough, in order to save costs, I led the team to transform the power supply system and often worked overtime until late at night. At the same time, the transformation process made me deeply understand five grounding systems, and the maintenance of inverter welding machine greatly enriched my knowledge of electronic technology. The transformation of CNC flame cutting machine makes our system consolidate the control technology, save money for the factory and improve the production efficiency. In short, you can learn from working in any factory, even in garbage factories, and the chargers used by workers to charge electric vehicles at work are all places where you can learn, and you can understand. Electronic ballast, frequency converter and inverter will be similar! It is this kind of work that has made me outstanding in the company for several years and promoted step by step!

Third, no matter at what stage, we should be good at thinking and summing up experience.

As an electrician, you should always take notes and sum up experience! This will help to consolidate the knowledge you have learned, improve the maintenance efficiency of future queries, and pass on the knowledge to others. There is a lot of basic knowledge in work that is easily overlooked. For example, why is the secondary side of the machine tool transformer grounded? Some people are confused about isolation transformers, including senior engineers. In fact, this is common sense, that is, the protective measures taken to prevent the low voltage of primary side and secondary side from being connected in series. Moreover, many senior engineers generally don't know the meaning of AC3 on CJx2 contactor, so it is easy to waste if you don't pay attention to this when choosing!

2.202 1 personal work summary of maintenance electrician

In xx years, with the care and support of the power supply station, all economic and technical indicators and tasks have been well completed. The complete success of the work is first attributed to leaders at all levels and colleagues around them. I just did what I had to do and did my duty. After years of training and tempering, I fully understand the enterprise spirit of "loyalty and dedication, pioneering and enterprising, learning and innovation, and quality service" advocated by superior leaders and the profound connotation of a series of advanced enterprise cultures. In Huilongsi village, as an electrician, although he can't directly create economic benefits for the local area like other businesses, he plays an important role in escort, just like a small screw on the machine.

Looking back on my work in the past year, I have mainly done the following work:

First, the technical indicators issued have been successfully completed.

By the end of 65438+February, the power supply in our village was completely completed, the electricity fee was recovered at zero per month, the safety production was "three noes", the safety record was maintained for a long time, and the quality service and honest service achieved good results, and the complaints reached "zero" throughout the year.

2. Safety in production has remained relatively stable.

In the past year, according to the requirements of "clear responsibility, strict discipline, strong supervision and clear rewards and punishments" put safety inspection and safety production at the top of all work, strengthened the implementation of safety work, established all-round and whole-process safety production, actively participated in various safety activities organized by the Bureau, paid attention to the investigation and study on the construction site to understand the truth, solved practical problems and paid attention to safety management in the project construction process. In this year's tense rural power grid, due to effective cooperation, the whole process of safe production is ensured, accidents are eliminated, equipment maintenance and tree obstacle treatment are in place, and the distribution accident rate is reduced. The intact rate of distribution equipment is 65,438+0,000%. Focus on the actual work, check the hidden dangers, check the signs of accidents, check the unsafe factors, and thoroughly remove the safety dead angle.

Three, earnestly implement the service and standardized management.

Over the past year, guided by policies and regulations, and aiming at quality service, we have earnestly served farmers, improved service quality, standardized working procedures, provided services to customers, and insisted on 24-hour telephone access. Adhere to the door-to-door service for elderly customers with mobility difficulties and implement the "heart-to-heart" project. As long as you receive a call for repair, you should go to the door for repair immediately, and the general accident should be repaired immediately. It is not too late to explain the situation of special accidents. For users with limited mobility, take the initiative to collect fees and run three or four times a month. Integrity service tries its best to reduce arrears and power outages, which is well received by users. In practical work, I am more active. From August to September this year, the Beijing Olympic and Paralympic Games attracted worldwide attention. In order to ensure that people can watch TV programs safely and timely and save electricity, I gave up my rest time, worked for more than ten hours every day, checked the lines and equipment, and dealt with all kinds of hidden dangers in time to ensure that there was no power outage during this time. During the peak electricity consumption this autumn, there was no power failure accident caused by my responsibility, which ensured the farmers to produce electricity. With hard work and enthusiastic service, we have been satisfied by our customers. In short, whether it is day or night, windy or rainy, as long as we receive an accident call, we can help our customers solve the problem as quickly as possible. Copying, inspection and collection are the focus of our work, which directly relates to our economic benefits. In our work, we seek truth from facts, read the meter on time every month, do not estimate or omit copying, review it in time after copying, and recover our income, no more or less. We put the responsibility of electricity charge recovery in place before electricity can be sent out. If we can't find anyone on a trip, we will block it in the morning and ask for it at home at night. It's really difficult, and through unremitting efforts, we try our best to ensure the timely recovery of the monthly electricity bill. There were no complaints throughout the year, which standardized the management of rural electricity consumption, reduced the burden on farmers and established a good image of our power supply enterprise among farmers.

Although I have made some achievements in my work in xx years, I should also face up to the existing problems and shortcomings. In the new year, in order to achieve higher goals, we should improve the industry style and work style and further strengthen work discipline. The awareness of quality service and honest service needs to be further strengthened.

The above is a summary of my personal work. If there are any shortcomings, please criticize and correct me!

3.202 1 Personal Work Summary of Maintenance Electrician

I graduated from XX technical school, majoring in coal preparation. I was assigned to work in the coal preparation workshop of Linhuan Coal Preparation Plant, and entered the electromechanical post in 1998. 20xx 1 1 went to Wobei Coal Preparation Plant to participate in debugging, and has been the monitor of the peripheral class since then.

I have been engaged in electrical equipment maintenance for 16 years, during which I have experienced many ups and downs. From the original apprentice to the master, he brought five apprentices, from the master to the current management, and now he has 18 maintenance electrician. Now we should not only do a good job in the daily maintenance of the company's electrical facilities, but also provide technical guidance to the following employees. When we encounter a thorny problem, we must go to a new site to troubleshoot. After troubleshooting, we must explain the cause of the fault and what they overlooked when looking for the fault. Let them learn from it, not only can we repair similar faults independently in the future, but we can also learn to draw inferences from others.

Over the years, I have summed up a lot of experience, including skills, mentoring, experience and work performance.

First, consciously strengthen theoretical study and strive to improve personal quality.

In many years of work practice, I deeply realized that without a firm and correct political direction, there would be no positive guiding ideology. In order to improve my ideological and political level, over the years, I have developed the habit of caring about national affairs, paying attention to the situation at home and abroad, analyzing the impact of changes in the situation on enterprises, and putting this thought into practice, ensuring that my thoughts and actions are consistent with the party's line and principles, constantly learning the "Theory of Three Represents" theory and "eight honors and eight disgraces", strictly demanding myself by party member standards, and learning from advanced model figures. Strengthen their own quality construction, influence people around them to join the ranks of pioneering and creating excellence, and make suggestions for the development of enterprises.

Some people say that if a person wants to become a talent, he must be a man first, and the reason is self-evident. In other words, if a person wants to succeed in his career, he must first learn how to be a man, especially the highly technical job of maintaining electricians. He should work hard, concentrate on his studies, be open-minded and tolerate no carelessness or mistakes. All work must first have a correct attitude, develop good professional quality, be serious and responsible for your own work, obey the arrangement of the leader, listen to the opinions and suggestions of others with an open mind, and obey the interests of the company, be polite and serve warmly. It's the only way.

Second, technical experience.

In recent years, when I was doing electrical equipment maintenance, I helped my peers solve many problems, many of which were soft faults. Some replaced parts have their own problems, but some maintenance personnel really ignore these points.

Trust new components too much, and when they find that a component is burnt out, they will successfully install a component of the same model. A test machine found that the fault still existed. At this time, according to his inertial thinking, he will naturally check whether other parts are damaged. After earth-shaking search, the root of the problem has never been found. The good circuit board was turned upside down.

In this search process, due to high concentration, the scope of search is constantly expanding, and there is no result after a busy day, and pressure and tension follow. Thinking will be confused, not as clear as it was at first. Later, I asked for help. Before starting, I must ask the users of the equipment carefully what abnormal conditions will occur when the equipment fails, including sound, taste and temperature.

In fact, electricians should ask patients carefully first, just like doctors treat patients, what's wrong and how they feel. After asking, you will know which part is wrong, which narrows the fault range. It is also important for patients to tell this story. If he has a headache, it's really a sore foot, which diverts your judgment on the fault point. It will be a painful experience, and then ask the previous maintenance personnel to understand his maintenance process and the symptoms after the trial operation after replacing the parts.

In these inquiries, I found something, know what he missed, and also evaluate the possible new faults after his maintenance. The fault at this time may not be as simple as it was at the beginning. Human fault, the original fault itself, may also appear soft fault. First, make a preliminary inspection of the equipment to determine whether it can be turned on. If it can be connected, it is necessary to "listen" and "touch" carefully, and then check whether the working voltage and output voltage of the original replacement components are the same as those marked on the drawings. After measurement, the working voltage of the new components is normal, but the output voltage does not match the voltage marked on the drawing.

Then remove the component and measure, and find that the component is damaged. However, this does not rule out that this component is burnt out due to other faults after installation, and then the voltage and current of peripheral components related to this component are measured, and no abnormality is found. I just took a matching component and measured it first to make sure it was installed correctly. Try to troubleshoot the machine again. At this time, the maintenance worker said with surprise: "Why can't I put it on?" I asked him if you had measured the components before installation. He said the new one is still in use. It must be good. I reminded him that if he wants to be an excellent maintenance electrician, he should not trust new components too much, and sometimes he should not even believe what he saw with his own eyes. Maybe what you see with your eyes is fake. For example, when measuring, there is something wrong with the instrument itself, and sometimes the components have soft faults. When you measure, it is good, but it will go wrong after being installed and powered on for a while. At this time, it is likely that the thermal stability of components is not good, and what is seen during measurement is false. Don't trust the data measured by the instrument to repair this kind of fault, but use the replacement method to find more parts of the same type to try. I think you should judge everything you see by your own experience.

4.202 1 Personal Work Summary of Maintenance Electrician

Since I took office, I have constantly strengthened my self-cultivation, strived to improve my ideological and moral level, earnestly deepened the study of various cultures and professional knowledge, constantly explored new knowledge, made pioneering efforts, actively carried out all work within my intellectual scope, fully performed my duties, and played a good exemplary role. Taking an active part in technical exchanges and scientific and technological innovation activities, Dida has done a good job of passing on, helping and leading, and fully fulfilled various tasks and indicators assigned by superiors, which has played its due role in the company's production development. I will summarize my professional and technical work since I took office as follows:

First, consciously strengthen theoretical study and strive to improve personal quality.

Without a firm and true political direction, there will be no positive guiding ideology. In order to constantly improve my political and ideological quality, I have been paying close attention to national affairs and domestic and international situations in recent years, analyzing the impact of changes in the situation on enterprises, and putting this idea into practical actions in the production process to ensure that I am always consistent with the party and enterprises in thought and action. At the same time, I also bring this idea into my work and study, and constantly pursue my own progress. Some people say that if a person wants to become a talent, he must be a man first, which makes sense. In other words: if a person wants to succeed in his career, he must first learn how to be a man! Especially those who do our highly technical work, we should look at things attentively, concentrate on things and learn with an open mind. There is no room for carelessness and mistakes. First of all, we should have a correct working attitude, good professional quality, be serious and responsible for our work, obey the arrangement of leaders, listen to others' opinions and suggestions with an open mind, unite colleagues, be polite to others and serve warmly.

Second, correct working attitude and play a leading role.

Since I joined the company, I have been engaged in all electrical affairs, including safety and quality supervision and inspection during all capital construction periods. I am well aware of the importance of electrical management during construction, especially the electrical infrastructure and most of the invisible projects. It is necessary to supervise and inspect at any time, solve problems when found, and never rush into it, otherwise the future trouble will be endless and can never be eradicated. This is a test and responsibility for our electrical management.

As the monitor of an electrician class, I am duty-bound to bear the responsibility and burden. So in my usual work, I not only ask my team members to be careful in supervision and inspection, but also know that it is necessary to be hard while the iron is hot. I made some strict demands on myself. First, when I encounter dirty, tired and dangerous work, I will walk in front of the workers and do more and more effectively than the workers.

Second, when encountering technical difficulties, we should step forward and try our best to overcome them. I always insist on doing everything well and putting the interests of the company first. Including after the completion of the production process, sometimes it is a race against time to deal with large and small electrical equipment failures, winning valuable production time for the company and laying a solid foundation for the company's development. I think that since I want to take the test as a technician, I will be better than ordinary workers in many aspects such as business level. When the company assigns tasks, when it is difficult for ordinary workers to complete them, they should take the initiative and not shirk with the workers. They should bravely shoulder the heavy burden like technicians. Usually, I not only ask myself this way, but also do it according to these requirements in practice. So I want to play the role of a technician in the company and establish a good image of a technician.

Three. Safe production to ensure the safety and quality of the company's electricity consumption.

1. With the long-term operation and the increase of load, problems such as aging, measurement error and insufficient capacity are becoming increasingly prominent, resulting in serious resource loss (power loss) and security risks. At the beginning of the year, the center invested a lot of money to update the electricity meters in all the company's business stores and replace and transform the internal irregular lines. The renewal of electric meters began on April 4th, 2009/KLOC-0, and was completed on April 6th, 5438+08. Replacement meters are allocated according to the capacity of each store. The models of electric meters are: electronic single-phase DDS438 type 5-20a, 10—40A-40a, 20-80a, and electronic three-phase four-wire electronic meters 20-80a, totaling 2200. Assist the construction team to rectify 1572 indoor irregular lines.

2. Due to the rapid development of business households, the demand for electricity is increasing year by year, and the center has invested huge sums of money to ensure the power supply safety of power grid lines, trunk lines and indoor lines. In May, all groups of power lines were evaluated, and the overloaded lines were expanded: 50MM2 copper core cable was newly installed. More than 80 air conditioning lines were installed during high temperature. Replace underground cables for four cement poles tilted in the market. Relieved the pressure of power supply line and passed the peak period of power consumption smoothly.

3. The power supply from West Power Distribution Room to Guanghua Footwear Base is a problem left over from history. On February 27 this year, the company's footwear base had a double-channel power supply reverse power transmission accident, which caused great security risks to the market power supply. The leaders of the center attached great importance to it, and the department timely replaced four DW 16-2000A intelligent circuit breakers in the east-west distribution room. Under the mediation of the three parties, the department arranged the electrician team to cooperate with the power supply company, and completed the power distribution project of the shoe base perfectly.

Fourth, implement the responsibility for production safety.

1, the company leaders put safety in production first, and the section chief repeatedly told each member about his pre-attendance safety and overhead maintenance at the morning meeting every day. In particular, the section chief and Ye engineer of each production tool personally inspected and supervised, and the tools found to be seriously defective and damaged were destroyed in time, and no accidents such as personal injury, power grid, equipment and fire occurred throughout the year.

During the period from February to September, in order to ensure the safety and quality of electricity consumption during the peak period of high temperature, the company arranged a special person on duty system for the east-west power distribution room and the box-type power distribution room, promptly eliminated equipment failures, recorded equipment operation every hour, and ensured the reliable operation of each circuit.

3. Conduct routine water and electricity inspection on the company and Guanghua Footwear Base every day, and handle the situation in time if found. Also cooperate with the company's monthly safety inspection. Timely rectification of matters with hidden dangers of hydropower.

4. Regularly check the planned power outage control system, street lamps and broadcast monitoring system every Friday, and make inspection records. More than 50 street lamps/kloc-0 have been replaced this year. If any abnormal situation is found, adjust it at any time, and report the problems to the company leaders in time.

5. Before each typhoon comes, conduct a comprehensive inspection on the internal power supply network, light poles and cables, outdoor billboards, electric shutter doors and drainage pipes. In order to plan ahead.

Fourth, fully cooperate with equipment maintenance and strengthen equipment maintenance.

Combined with the opportunity of low power consumption, overcoming difficulties and diverting power, all equipment was overhauled, pre-tested and eliminated in turn in mid-June165438+1October. The equipment maintenance of the East-West Power Distribution Room cooperated closely with the construction personnel, and completed the switching operation, safety measures arrangement and on-site safety supervision and management of the power transmission equipment. During the maintenance, oil leakage and discharge of the high-voltage cable in the west distribution room were found in time, and the original 70MM2 copper-core high-voltage cable was replaced with 120MM2 copper-core high-voltage cable. Replace 2 sets of disconnectors (2000a), 3 sets of DW 15 circuit breakers (630a), 44 self-healing capacitors and 5 sporadic accessories in the east-west distribution room. At the same time, the base, pull rod and box surface of some corrosion equipment in high pressure chamber were treated with anticorrosion. Operation of single equipment, power switching, cleaning and maintenance, and equipment acceptance after maintenance.

Five, do a good job in the work of the whole group, the establishment of water and electricity, radio, monitoring files.

1. This year, the electric meters will be replaced, the information of the electric meters will be improved, the construction records of the electric meters will be kept, and the removed old electric meters will be marked and put into storage according to each household in the group. List the electricity consumption reading of the old electric meter and the meter number and capacity of the new electric meter.

2. Make a planned water use report for the company 13 water meter every month and send it to the Municipal Water Saving Office. The readings of the active and reactive power meters of the east-west distribution room and the spacer transformer shall be recorded, and the data shall be registered and filed every time.

3, completes the power supply equipment maintenance, annual inspection report. Establish a special account for major equipment, and record the maintenance items, models and quantities of replaced equipment and materials, and the operation of the equipment after maintenance.

4. Manage the electrician warehouse. Regularly declare the material consumption and list the materials in and out of the warehouse, ensure a certain inventory of common spare parts, and register the materials in the place of use.

Six, strengthen business learning, improve the technical level.

It's never too old to learn this sentence is my motto. Today, with the continuous development of science and technology, you will fall behind if you don't study for a day. Especially electrical automation, no one can fully grasp everything. It is constantly developing and updating, just like computer software, it is updated every day and has been developing. Maybe you knew it yesterday, but it will be different in two days, and more advanced things will be put in. So I usually read more professional books as long as I have time.

Over the past few years, I have collected a large number of new professional books and materials, constantly enriching myself and constantly mastering new knowledge. For example, electrical design and drawing, electronic technology, modern frequency conversion technology, DC application in industry and so on. In the process of learning this knowledge, I learned a lot of new knowledge, such as PLC programming control principle, ABB inverter setting and control principle, SIPMOS high-power bidirectional thyristor control principle and so on, which really benefited me a lot!

Not only did I broaden my knowledge, but also greatly improved my technical level, which also made me interested in learning higher-level theoretical and technical knowledge.

5.202 1 Personal Work Summary of Maintenance Electrician

First, ideological understanding.

In the first half of the year, as a monitor, I was strict with myself ideologically and loved my career. I was strict with myself according to the monitor's requirements and urged myself to set an example in my colleagues' minds and work. Actively participate in various activities organized by factories and companies, such as lectures by factory supervisors. Over the past six months, I have obeyed the leadership and cooperated with the leadership to do a good job in the production department. I believe that in my future work, I will overcome my own shortcomings and make greater progress through my own efforts with the care of my leaders and the help of my colleagues. In the second half of the year, I will work harder, study hard and practice hard, so that I can truly become a monitor who can stand any test.

Second, maintenance work.

In terms of maintenance work, the task in the first half of the year is very heavy, but in any case, in order to improve my maintenance level, I insist on reading some related books frequently, and often find some mechanical maintenance materials on the Internet, and also strive for opportunities to chat with colleagues and learn from others' strengths. Usually, I also humbly ask experienced teachers. Often go to the equipment site to see, communicate with the production department, understand their defects in equipment operation, take notes and deal with them in a unified way. If it cannot be handled, it shall be reported to the Equipment Power Department through oa process to request technical support.

Third, the work of the monitor.

I am strict with myself, work hard and can complete all the tasks assigned by the leaders. As we are mechanics, this special occupation determines that we still have a lot of work to do. I obey the arrangement of the leader and work hard, mainly to complete the monthly equipment maintenance plan and daily maintenance work, and also to deal with some unexpected accidents. And well completed the tasks assigned by the leaders. In the future work, I will, as always, be down-to-earth, more actively cooperate with the leaders to complete all the work, and work harder for Huafeng's bright future.

Fourth, attendance.

I strictly abide by the company's rules and regulations while doing all the work well. Handle the relationship between company work and individuals. So far, I'm still working out the attendance system, adding some actual work conditions to the previous machine maintenance system. I will gradually improve the attendance system in the least time. In the second half of the year, I will be more diligent, do more things for myself, study professional knowledge harder and improve my business level by going up a storey still higher.

To sum up the above points, there are still shortcomings. As the saying goes, "no one is perfect", I will spend more time leading all my mechanical maintenance colleagues to develop their professional skills and find a bigger development stage for themselves and them. As the monitor of xx driver's class, xx has always kept in mind a sentence in his work for one year: "Thousands are important, thousands are important, and safe driving is the most important!" . Make xx traffic safety work without assessment accidents. In practical work, he did this:

Obey the law and drive safely.

In daily work, xx believes that in order to drive a safe car, we must first firmly establish the idea of safety first, study and abide by all laws and regulations of the government and relevant departments, obey the command of traffic management personnel, and truly "concentrate when the motor rings! When the wheels move, I think of the masses. " He attached great importance to traffic safety study, and he deeply realized that safe driving was not an armchair strategist, but was bought by thousands of people in Qian Qian with their blood and lives. He has always believed that to deal with traffic accidents, we must "let go of three things" (the reasons are unknown, the rectification measures are not implemented, and the punishment is not in place).

As the monitor of the driver's class, I manage the production vehicles and residential vehicles of the property management company. The property management company has two cars, a production van, a special sanitation vehicle and a sprinkler. My usual job responsibilities are to manage drivers' driving tasks and vehicle maintenance. The workload is heavy and trivial. How to manage the work well is a problem that I have been seriously thinking about. I can start from myself at the beginning of this year and have been strict with myself. While being a good driver of your own car, do a good job in vehicle management and scheduling, make rational use of vehicles, and make each car reach the utilization rate. In order to save money for the company, I taught myself vehicle maintenance technology.

Through special research and hard study, in just a few months, he mastered simple automobile maintenance technology. When any vehicle breaks down, I will first conduct a comprehensive investigation on the vehicle myself to find out what kind of fault it is. Sometimes when I can't get away from work, I will use my spare time to go to the unit to repair the car alone, so that I can handle the car without going to the maintenance station, which not only saves the company the cost of car maintenance, but also touches the drivers of the team, who can strengthen the care for the car in their usual work and enhance the professionalism of the class members in their usual work. My practice has been well received by the cadres and workers of the whole company!