What are the best methods and job requirements for sticking tiles on the wall?

In recent years, there is a decorative style called floor tile on the wall, which is very elegant and easy to blend in with the living room environment, presenting a perfect visual effect to the owner. However, floor tiles are porcelain products, which are easy to empty and fall off if they are not paved well. So, what is the best way to stick tiles on the wall? What are the workmanship requirements for the upper wall of floor tiles?

First, the best way to tile the wall: 1, the best way to tile the wall-clean the datum before tiling.

First of all, before putting tiles on the wall, you must tear down the original wall. Secondly, if cracks are found in the wall, it is necessary to destroy the bricks and tiles to prevent the cracks in the wall from becoming bricks falling on the wall. When the verticality and flatness of the local brick wall are different, cement mortar should be used for leveling. Finally, compare the color difference between bricks.

2. The best way to stick the floor tile on the wall-the brick should be completely immersed in water.

The water absorption of wall brick is relatively high, about 10%, so this characteristic must be fully considered when pasting. Before sticking the tiles on the wall, pour enough water on the surface of the base to make it wet. If this measure is not adopted, it is easy to make wet mortar dry bricks and base surface dry quickly, which will affect the durability and easily cause cement to fall off. Water is sucked in through the tiles on the wall, which greatly reduces the adhesion of cement.

3. The best way to stick a floor tile on the wall-the water absorption rate of the brick should reach saturation.

When the weather is dry, the floor tiles should be soaked in water for several times to make the water absorption of the tiles always saturated. Therefore, in application, ceramic tiles will not absorb water cement mortar, thus affecting the bonding degree between ceramic tiles and cement mortar, and avoiding the phenomenon of falling off or depression in the later stage.

4. The best way to attach the floor tile to the wall-the process and sequence of laying.

Don't leave any stains on the wall when sticking tiles, and then coat the wall with cement. Diagonal positions of tiles must be flush. First the placement order, then the outside, first the bottom, then the top. It is worth noting that the bricks of the wall cannot be connected to the top at the same time to prevent the tiles from collapsing due to their own weight.

2. Workmanship requirements for ceramic tile upper wall: 1. Determine the height, size and laying method.

Before tiling the wall, be sure to confirm the height of the wall, especially the extraction of kitchen and bathroom and the installation of ceiling, and pay special attention to the height problem. Secondly, the size of wall bricks and tiles should not be very large, and they must be coordinated with each other. Finally, according to the requirements of the first two steps, in the method of determining the paving brick, if the wall size on the tile is different, stick the small tile on the upper and lower tiles, and the large tile is lower than the paste.

2. Uniform distribution and edging.

The tiles on the wall look like a complete effect. It should be refined to the height of each brick and the angle should be appropriate. The tiles must be flat. Finally, when removing the edge, it is necessary to confirm the flatness of the gap at the edge of the tile.

3. Joint filling after paving.

After the completion of the tile, clean the surface of the tile and check the general situation. Then, the final filling of the tiles is completed.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~