The best way to prevent water from pouring on the second floor

The best way to prevent the second floor from falling down is to call the property directly, or call a professional master to repair it at home and hand over the professional work to a professional person.

Because the 1 floor of many houses is an independent pipe, and after the second floor is a public drainage pipe, almost all the water will be collected on the second floor. If the pipeline on the second floor leaks, it will cause the water on the second floor to overflow Jinshan, leading to the problem of anti-water. According to the design of the pipeline, the pipeline on the second floor is easy to be blocked. Once the blockage in the pipeline becomes more and more serious and the drainage is not timely, it will directly flow back to the second floor.

If there is a water flow, it needs to be solved by the property management company. Generally speaking, it needs to be dredged directly with a pipe dredge. If the water leakage is serious, it is caused by a pipe problem. At this time, the new pipeline should be replaced directly, and at the same time, the cross-sectional area of the pipeline should be slightly larger, and the drainage speed will be accelerated.

The reason of anti-water on the second floor

1, blocked

It is most likely that there is a blockage under the sewage main. Once the sewage is not discharged smoothly, the sewage will flow back to the nearest outlet from the blockage point. You can't handle this situation, you can only dredge the pipeline company.

2. The main pipeline is blocked.

If your home is on the second floor and the sewer water flows back to your home, it can be said that the pipeline below the second floor is blocked. This blockage is mainly caused by the blockage of the main sewer, that is, the main sewer from the first floor to the seventh floor is blocked, and the blockage position is generally at the 90-degree elbow from the manhole cover to the bottom of the first floor, so the sewer flows back to the second floor.

3. Poor hydraulic conditions

Residential drainage is generally gravity drainage, sewage is discharged into drainage riser first, and then discharged into horizontal drainage main pipe by residential sanitary ware. And finally discharged into an outdoor drainage inspection well. In general, the drainage speed of the drainage riser is higher than that of the horizontal main drainage pipe. When the sewage is discharged to the bottom of the drainage riser and transferred to the horizontal drainage main pipe, instantaneous blockage will occur, and a short section of positive pressure water column will be formed at the bottom of the drainage riser. If the hydraulic conditions there are not good,