How to write the quality loss report

Question 1: How to write the quality accident report? The quality accident report should include the following parts: What are the quality defects of the products? How to find out, how much the loss of quality accident is, the cause analysis of quality accident, corrective and preventive measures, who is responsible for quality accident, punishment decision, etc. You can write it with reference to these things.

Question 2: How to write the quality commitment letter? Supplier _ _ _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party A) Demander: _ _ _ _ _ _ _ _ _ _ (hereinafter referred to as Party B) I. Obligations of Party A 65438. 2. The drugs supplied by Party A must comply with the national drug laws and regulations. 3. Party A shall provide the inspection report of each batch of drugs sold. 4. The whole package of drugs supplied by Party A shall have the certificate of conformity. 5. Copies of the Imported Drugs Inspection Report and the Imported Drugs Registration Certificate shall be provided for imported drugs, and the original seal of the quality management organization of Party A shall be affixed. Two. Obligations of Party B 1. Party B shall provide copies of the Pharmaceutical Business License and Business License with official seals to prove its legal qualification. 2. After the goods are qualified, Party B shall pay within the specified time limit. Three. Protocol description 1. If the quality of the goods provided by Party A does not meet the requirements, Party B has the right to refuse and temporarily take care of them, and Party A should actively deal with the aftermath. Within the validity period of drugs: Party A is responsible for the quality of drugs it sells. If the quality is unqualified, Party A shall bear all economic losses, but Party B shall bear the losses due to the quality problems caused by improper storage by Party B. 2. This agreement has the same legal effect as the contract. If either party breaches the contract, it shall be settled through consultation. If negotiation fails, the local people's court shall make a judgment. 3. This Agreement is in _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4. The validity period of this agreement is _ _ _ _ _. Party A (signature): Party B (signature): Party A (signature): Party B (signature): Party B.

Question 3: How to write the title of the claim letter-the claim letter, and if necessary, you can also indicate the reason for the claim, such as the claim letter with poor quality.

Text-mainly including the basis of the claim, the reasons and facts of the claim, the handling method and the amount of compensation, etc.

Signature-name, signature and date of the applicant.

Attachment-Provide relevant inspection reports, etc. , can be omitted.

[Scope of application]

This document is a letter from the injured party to the defaulting party for compensation according to relevant agreements or regulations after a dispute occurs in the course of trade.

[Sample Text Display]

Claim letter

Xx Beer Co., Ltd.:

Our company bought 200 cases of 6000 cans of draft beer of brand X from your company on the 5th of this month+5th of May, with the grade of first class. However, after the goods arrived, our quality inspector found that the quality of about 6 cases of beer in this batch was obviously lower than the sample standard provided by your company. After sampling inspection by the Quality Supervision Bureau of Chengdu, Sichuan Province, these six cases of beer contain obvious sediment, and some of the sampled samples have exceeded the standard of Escherichia coli, which is a unqualified product. Enclosed please find the quality inspection report issued by our company.

We hereby propose to your company that these six cases of beer that do not meet the quality standards should be destroyed in accordance with the relevant provisions of the Food Hygiene Law, and at the same time, your company will fully compensate our company for the losses caused.

I write to you and look forward to hearing from you.

Chengdu x x chain supermarket co., ltd

September 28(th), 2002

Question 4: There is a quality problem in the work, which leads to the company's loss. How to write a critical letter to the leader? When writing a critical letter to the leader, you can only avoid the reality and avoid the imaginary, write about the small mistakes of the leader, and try to avoid sensitive big problems.

Question 5: How to write a complaint report when there are quality problems in the house? First, which functional department should complain about housing quality problems? First of all, look at whether the warranty period of the house quality has passed. If not, housing quality problems can be complained to the local quality inspection station. Professional institutions should be found for housing quality evaluation. Housing quality problems should first be resolved through consultation with developers, and reported to the Construction and Communications Commission, Planning Bureau and other relevant departments for testing and filing. If both parties to a housing quality dispute reach an agreement through consultation, they may entrust an assessment agency for housing quality defects and losses to make an assessment report. If the parties fail to negotiate, the court will designate it in the evaluation agency. The people's court shall examine the assessment report made by the housing quality defect loss assessment agency according to law, and the assessment agency shall appear in court to accept the questions of the parties. It will also strengthen the supervision of the evaluation institutions to ensure the fairness and justice of the evaluation results. Second, how to complain about the housing quality problem (1) and negotiate with the developer. If you find quality problems, first look for developers, because property buyers and developers have a direct contractual relationship. Developers, as producers and sellers of commercial housing, bear the ultimate responsibility for the quality of commercial housing. The quality relationship between the developer and the buyer is bound by the commercial housing sales contract and the commercial housing quality guarantee. If the buyer demands compensation for the losses caused by quality problems, the developer shall compensate the buyer, and then the developer shall recover from the responsible unit according to the quality reasons and the contract. (2) If there is a dispute over the quality warranty responsibility of commercial housing, and the developer refuses to solve it, or is dissatisfied with the developer's solution, the parties may apply to the construction engineering quality supervision institution for organization appraisal or complain to the construction administrative department. For problems that affect the structural safety of houses, residents can directly entrust units with statutory structural safety appraisal qualifications to appraise houses, and the appraisal conclusion can be used as evidence of civil compensation. (three) to bring an arbitration or bring a lawsuit to the people's court according to law. If the above channels cannot be solved, the buyers can sue the developers according to the law and their actual situation. To sum up, we can easily find that the housing quality problem has become a common phenomenon. Many residents don't know how to complain about similar housing problems and how to solve them. They often look for property as soon as there is a problem, and the property department gives the problem to other departments because it is unable to solve it or for other reasons, which makes the problem drag on. I would like to remind property buyers to negotiate with the developers first, find out the nature of the problem, and then choose different ways to deal with it. If necessary, you can ask a lawyer to help you solve it and better safeguard your rights and interests.

Question 6: How to write a paper report on product quality? It's better to have a model article about Toyota's "recall door calling for automobile product liability insurance" affected by the recent Toyota "recall door" incident. At this year's National People's Congress, many CPPCC members' proposals are related to the current situation of the lack of automobile product liability insurance in China. For example, Zuo Yanan, chairman of Jianghuai Automobile (6004 18) (6004 18), suggested that the country introduce automobiles. Zeng Qinghong, general manager of Guangzhou Automobile Group, suggested that the insurance system should be improved to deal with the recall. These suggestions reflect the immature development of China's auto insurance market and highlight the blank of auto insurance loss prevention technology. Product liability insurance is based on product liability, which covers product liability risks. The so-called product liability refers to the legal liability that the producer or seller of the product should bear according to law when the product is defective and causes personal injury or property loss to consumers, users and third parties. Product liability insurance covers civil liability, that is, it is limited to economic liability and does not include criminal liability. Product liability insurance can be insured separately by the producers, sellers and importers of products, or by the producers and other interested parties listed as * * *.

At present, the liability insurance market in foreign countries is more developed than that in China, and the United States is the most developed country in the world. Not only domestic products need to be insured, but also products exported to the United States must be insured. In contrast, in 2008, the original insurance premium income of China property insurance was 23,3671100 million yuan, and the liability insurance business income was 8175 million yuan, accounting for only 3.5% of the property insurance market, of which product liability insurance accounted for a smaller proportion, and most liability insurance was not actively insured by enterprises, but passively insured at the request of foreign importers. The disadvantage of single insurance is very prominent. At present, China has not developed automobile product liability insurance. It can be seen that the weak public awareness of insurance and the inadequate business of domestic property insurance companies have caused the current development situation.

Since the promulgation of the Regulations on the Management of Defective Automobile Product Recall in 2004, China's automobile recall system has entered its seventh year. As of June 65438+February 3, 20091,there have been more than 2 10 recalls. These data show that both vehicle manufacturers and parts manufacturers are facing great risks brought by automobile recall. Foreign experience shows that automobile recall risk belongs to insurable risk, and automobile recall insurance is feasible.

On the one hand, from the perspective of automobile manufacturers, automobile product quality insurance can reduce enterprise risks and improve the competitiveness of automobile products. With the rapid development of automobile industry, some quality problems will inevitably be encountered. When the product has problems, it will face the risk of recall, which will bring huge losses. If the relevant liability insurance is insured, vehicle manufacturers and parts manufacturers can not only get financial support, but also get professional emergency strategy guidance from insurance companies in the face of recall incidents. Insurance companies will also supervise all relevant links in the automobile manufacturing industry to eliminate quality hidden dangers and improve product quality. Under the influence of the current product homogenization trend, automobile manufacturers have insured product liability insurance, which can improve the competitiveness of automobile extension products. Automobile product liability insurance is provided by a reputable insurance company. The reputation and professional perspective of insurance companies undoubtedly provide consumers with more psychological protection and substantial maintenance, which is equivalent to putting a "credit label" on products and taking out insurance.

On the other hand, automobile product liability insurance is conducive to improving the underwriting technology of insurance companies and enhancing the social image of the insurance industry. At present, the underwriting technology of insurance companies in China is still relatively backward, and there are not many companies involved in the study of automobile safety performance. Foreign underwriting technology is relatively mature, and many major quality risks are disclosed through insurance companies. Take the Toyota recall as an example. As early as February 2004, Farm Insurance Company, the largest automobile insurance company in the United States, reported to the American highway traffic safety supervision department for the first time that Toyota had potential safety hazards, and Toyota would suddenly accelerate while driving, causing an accident. It is very common for insurance companies to give warnings abroad, because insurance companies will evaluate product quality risks before underwriting, so as to determine the rate. If the automobile product liability insurance is introduced, the insurance company will strengthen the supervision of the production and installation of automobile parts for the sake of improving profit rate and preventing moral hazard. Once a quality accident is detected, it can be timely fed back to the manufacturer and reported to the public, thus improving the quality ... >>

Question 7: How to write the product quality guarantee? Product quality assurance model:

Dear customer:

First of all, thank you for choosing to buy XX products!

In order to ensure the product quality, clarify the product quality responsibilities of the buyer and the seller, ensure the product quality is qualified and ensure the product safety, the following guarantees are made:

1. In principle, the quality of products provided by our company shall meet the technical standards specified by the buyer. When the buyer does not have the specified technical standards, our company will follow the current national standards, and provide the buyer with samples of * * * products, and provide the buyer with * * * products after the buyer agrees, and ensure the stability and gradual improvement of product quality.

2. The supplier shall provide the buyer with a copy of the production license and business license stamped with the official seal of the supplier.

Three. The supplier shall provide the buyer with a copy of the product standard stamped with the official seal of the supplier.

Four. The supplier guarantees that * * * products meet the legal quality standards and is responsible for the product quality. When necessary, provide the buyer with necessary quality information, such as product inspection report and other relevant information.

5. Product packaging and registered trademarks of suppliers. Comply with the relevant provisions of the state.

6. The buyer shall store the products in strict accordance with the storage conditions indicated on the product packaging, and the buyer shall be responsible for the product quality problems caused by the buyer's poor storage and maintenance of the products.

Seven, consumer complaints about product quality problems, suppliers should actively cooperate to properly solve, if it is the responsibility of suppliers, suppliers should bear all responsibilities and expenses.

Eight. Handling of quality disputes (problems):

The buyer shall inspect the supplier's products in strict accordance with the established technical standards to ensure the fairness and scientificity of the inspection, and keep the remaining samples that fail the inspection for one week.

Our company will be responsible for the losses caused by the use of products that are really suppliers' quality problems.

If the supplier's production quality problem is really unused, the supplier and the supplier will negotiate to solve it (return or reduce the price).

Nine, this product quality guarantee shall come into effect when both parties sign the supply contract, and shall be terminated at the same time when the business is terminated.

_ _ _ _ _ _ _ _ _ _ Company

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Question 8: How to write quality consciousness in factory quality report refers to people's objective and subjective views and attitudes towards quality (including product quality and work quality) and related activities in production and operation activities, that is, their understanding and attention to improving product quality, as well as their determination and desire to improve product quality. And human action is dominated by brain consciousness. What kind of consciousness will produce what kind of action. It is hard for a person with a wrong quality consciousness to imagine that he can make a good product. Only when his ideology rises to a certain height, coupled with the corresponding work skills, will he make a good product. A philosopher once said: "Height" is very important, which embodies a person's cultivation and connotation. A person who has done great things or seen great things is hard to be mediocre. It is conceivable that quality awareness is important to product quality.

Quality is the lifeline of an enterprise. If the product quality is not good, it will lose the market. Without the market, enterprises will lose their lives. Therefore, as employees of an enterprise, they must have the determination and desire to improve product quality, that is, all employees of the enterprise are required to establish a good quality consciousness.

So, how can we establish a good quality consciousness?

First, establish the consciousness that quality is the lifeblood of an enterprise.

Let all employees realize that if the product quality is not good, there will be no market for the product, and if there is no market for the product, the enterprise will lose its profit source. After a long time, enterprises will close down, followed by unemployment of employees. Of course, for our company, the product market is good at present, and I hope it will be better in the future, but we should be prepared for danger in times of peace and make the product quality better.

Second, establish a sense of quality customers.

Everything is customer-centered, and we regard ourselves as customers, as operators of the next process, and as consumers of products. In this way, we consciously do a good job, everyone does a good job, and the quality of the products is guaranteed. If we cut corners at work, it will harm our own vital interests.

Third, establish a sense of quality prevention.

"The quality of products is produced, designed, not tested. We must get things done in the first place. " This is not a slogan, which well reflects the preventive nature of product quality. If our quality control is not controlled from the source, it will be difficult for us to control the quality of our products. Even if a lot of inspection manpower is invested in production, the cost of products will be greatly increased because a large number of defective products and even waste products are not controlled from the source, which will cause heavy burdens and losses to the production cost of enterprises. Moreover, the quality problems of some products may not be remedied when they are discovered in the later process, which requires us to do things well at the first time to prevent quality problems from happening.

Fourth, establish the procedural consciousness of quality.

Quality management is the whole process and the whole company, and the work between all processes and departments of the whole company must be orderly and effective. All quality managers and operators must strictly follow the procedures. If they don't follow the procedure, the chances of making mistakes will increase and the quality of the products can't be guaranteed.

Fifth, establish a sense of quality responsibility.

Dr. Zhu Lan, an American quality management expert, believes that 80% of the quality problems are caused by management, while only 20% are caused by employees. In other words, the controllable defects of managers account for about 80%, and the controllable defects of operators are generally less than 20%.

The principle of distinguishing defects that can be controlled by operators from those that can be controlled by administrators;

A. The operator knows how to do it and why to do it;

B. Operators know whether the products they produce meet the requirements of specifications;

C. The operator knows what will happen if the products he produces do not meet the specifications;

D. the operator has the ability to correctly handle abnormal situations.

● If the above four points have been met and the material conditions such as equipment, tooling, testing and materials are available in production, but the fault still occurs, it is considered as a defect that the operator can control.

● If any of the above four points cannot be met or the material conditions such as equipment, tooling, testing and materials are not available in production, it is the responsibility of the management. Only by understanding the responsibility of quality problems can we improve the problems and improve the quality.

Sixth, establish a sense of continuous quality delivery.

Quality is not the best, only better; Quality improvement is a continuous, cyclic and continuous improvement process, following the PDCA cycle mode, which can be briefly described as follows:

P plan: according to the product ... >>

Question 9: How to write the application for housing quality appraisal? Paragraph 1 of Article 60 of the Building Law stipulates: "A building must ensure the quality of its foundation works and main structure within a reasonable service life." After the delivery of commercial housing, if the purchaser thinks that the quality of the main structure is unqualified, he may entrust the engineering quality inspection agency to re-approve it in accordance with relevant regulations. If the quality of the main structure is unqualified, the purchaser has the right to return a house and causes losses to the purchaser, the real estate development enterprise shall be liable for compensation according to law. However, the buyer must be reminded that the engineering quality inspection agency entrusted for verification must have corresponding qualifications, and the buyer and the seller must reach an agreement through consultation. If the two parties fail to reach an agreement through consultation, they shall apply to the court for the designation of a testing institution, otherwise the testing institution entrusted unilaterally will have no legal effect without the approval of the other party.

If both parties to a housing quality dispute reach an agreement through consultation, they may entrust an assessment agency for housing quality defects and losses to make an assessment report. In judicial practice, when the parties fail to negotiate, the court will designate it in the evaluation institution. The people's court shall, in accordance with the law, examine the assessment report made by the assessment agency for housing quality defects and losses, and the assessment agency shall appear in court to accept questions from the parties concerned. If the buyer wants to claim successfully, he should also pay attention to the preservation and collection of evidence, because in the court hearing, the buyer needs to provide evidence to prove that the seller needs to compensate for the losses. First, there is evidence of quality problems in the house; second, there is evidence that the seller refuses to maintain or delays maintenance within a reasonable period; third, there is evidence that the buyer maintains by himself or entrusts others to maintain; and finally, there is evidence that the buyer suffers losses. If the above evidence cannot be provided, the purpose of claim cannot be achieved because the evidence cannot be supported by law. For example, in the case of 1, the photos provided by Zhang cannot prove that the house has quality defects, and the evidence is insufficient and there is no other evidence to confirm each other, so his claim is not supported. Second, what housing quality problems can buyers claim?

The house purchased by the buyer has quality problems, and the personal and property safety and normal living and use of the buyer cannot be guaranteed after repair. For example, there are serious quality problems in the foundation engineering and main structure engineering of houses, which lead to foundation subsidence, house inclination and load-bearing structure deformation, which are generally difficult to solve through maintenance. Therefore, if the buyer requests to terminate the contract, the people's court shall allow it. However, whether the housing quality problem seriously affects the normal living and use is very complicated in practice. The general practice is to be tested by engineering quality testing institutions and confirmed according to the test conclusions.

The quality of houses developed by developers, the use of building materials and equipment, or the construction procedures of houses can not meet the statutory quality standards, which is the most common and easy to cause disputes at present. Specifically, it includes: unqualified quality of the main structure, rain leakage from the roof, wall falling off, doors and windows unable to be opened or closed or gaps exceeding the specifications, water leakage in the basement with waterproof requirements, water dripping up and down the room, water leakage and air leakage in the heating system pipeline, falling of electrical appliances, wires and lighting lamps, indoor ammonia, benzene, formaldehyde, radioactive radon and other toxic and harmful gases exceeding the standard. For this kind of housing quality problem, developers should bear legal responsibilities for property buyers, including maintenance, check-out, house change and compensation.