What if someone steals electricity?

Now it's all electricity meters.

Where else can I steal electricity?

Sweating. . .

It used to be official, right?

What if someone is suspected of stealing electricity?

Teach you two ways.

First: short circuit method. Turn off your main power switch first and find a thick wire, such as a fuse, or something thicker, as long as it can conduct electricity. Plug both ends of the wire into your power socket, then turn on the main power switch, and then it will short circuit, and all the appliances they are using at home will hang up, but your own plug-in will also be burned.

Second: switching mode. Unplug all the electrical appliances at home first, then turn off the main switch directly and then turn it on; Turn it off and then on after ten minutes; Repeat the last operation for one hour in ten minutes. Even if someone steals your electricity, he will know that you found out and warn him that there are still measures to be taken next. Ordinary people will surrender.

If you steal electricity, how do you find out?

When the meter is in normal operation, the instrument can't detect electricity theft, and the power supply bureau

It should be to check the electricity meter.

How to steal electricity from home? Is there any way?

Find out that the live wire "L" and the ground wire "yellow-green" are connected to the electrical appliance. Be sure to pay attention to the fire line, do not allow the zero line "n", pay attention to safety. It is best to keep the ground wire away from electrical appliances to prevent the shell from being charged. This method is very effective. You can try that the meter won't turn, but pay attention to safety. The ground wire is a protective wire, which will make it live, so the load should not be too large to avoid danger.

What if someone steals electricity through WeChat?

Teach you two ways.

First: short circuit method. Turn off your main power switch first and find a thick wire, such as a fuse, or something thicker, as long as it can conduct electricity. Plug both ends of the wire into your power socket, then turn on the main power switch, and then it will short circuit, and all the appliances they are using at home will hang up, but your own plug-in will also be burned.

Second: switching mode. Unplug all the electrical appliances at home first, then turn off the main switch directly and then turn it on; Turn it off and then on after ten minutes; Repeat the last operation for one hour in ten minutes. Even if someone steals your electricity, he will know that you found out and warn him that there are still measures to be taken next. Most people will surrender.

What if the owner steals electricity?

Reflect to the power sector.

Is there any way to steal electricity?

Tips for saving electricity in rice cookers

There are two kinds of rice cookers on the market now: one is mechanical rice cookers, and the other is computer rice cookers. When using the mechanical rice cooker, cover the rice cooker with a towel, and be careful not to cover the air outlet, which can reduce the heat loss. When the rice soup is boiling, press the button to dry the rice soup by using the residual heat of the electric heating plate, then press the button and stew for 15 minutes. Be sure to unplug the power plug after using the rice cooker, otherwise the temperature in the rice cooker will automatically turn on when it drops below 70 degrees, which will not only consume electricity but also shorten the service life. Try to choose a high-power rice cooker, because cooking the same amount of rice, a 700-watt rice cooker saves more time than a 500-watt rice cooker. Generally, the power of computer rice cookers is relatively large, about 800 watts, which is more energy-saving, but the price is slightly more expensive, generally between 500 yuan and 800 yuan.

Tips for saving electricity on TV sets

A salesperson in the color TV area of Hainan Xinxing Electric Mall told reporters that TV sets can save energy in the following ways: First, control the contrast and brightness. Generally, the power consumption of the brightest and darkest color TVs can range from 30W to 50W. It is suggested to turn on the low wattage fluorescent lamp indoors and adjust the contrast and brightness of the TV set to the middle. The second is to control the volume, which is loud and consumes high power. The third way to save electricity is to watch DVD, preferably AV status. Because in the AV state, the signal is directly connected, which reduces the work of the TV tuner and naturally reduces the power consumption. Fourth, after watching TV, don't turn it off with the remote control, but turn off the power on the TV. Because after the remote control is turned off, the TV is still in standby state and still using electricity. Under normal circumstances, the standby time is 10 hour, which is equivalent to consuming half a kilowatt hour. Finally, add a dust cover to the TV set. This can prevent the TV from inhaling dust and increase power consumption.

Tips for saving electricity in washing machine

The sales staff of Haikou Xinhua South Electrical Appliance City told reporters that there are also tips for saving electricity when using washing machines:

1, soak the dirty clothes first 10-20 minutes. The soaked dirty clothes can be rinsed once with the washing machine, and if there are few clothes, they can be washed quickly, which can save electricity and correspondingly reduce the wear degree of the washing machine.

2, it is best to use low-foam detergent or rice noodles. There is no necessary relationship between the foaming amount of washing powder and washing ability. High-quality low-foaming detergent or rice flour is easy to rinse, generally less than high-foaming washing powder 1-2 times, saving electricity, water and time.

3. When soaking, washing and rinsing, separate light clothes from dark clothes. According to the order from shallow to deep, this can not only prevent dark clothes from polluting light clothes, but also choose different washing time according to the pollution degree, which is convenient and saves electricity.

Tips for saving electricity in air conditioning

1. Don't adjust the temperature of the air conditioner too low during use. Because the lower the temperature controlled by the air conditioner, the more power is consumed, so it is generally enough to reduce the indoor temperature by 6 to 7 degrees.

2. When the cooling at room temperature is set to 1 degree and the heating is set to 2 degrees, it can save more than 10%, but the human body can hardly notice this subtle difference.

3. Set high cold/high heat when starting to achieve the control purpose at the fastest speed; When the temperature is suitable, change it to medium-low wind to reduce energy consumption and noise.

4. The "ventilation" switch cannot be in the normally open state, otherwise it will increase the power consumption.

5. Less doors and windows can reduce the heat entering the outdoor, which is conducive to saving electricity.

6. For air-conditioned rooms, it is best to use thick curtains to reduce the loss of cold air.

7. The connecting pipe between indoor unit and outdoor unit should not exceed the recommended length, which can enhance the cooling effect.

8. When installing air conditioning, try to choose the dark side of the room to avoid direct sunlight. If there is no such condition, cover the air conditioner with a sunshade.

9, regularly remove the dust on the outdoor heat sink, keep clean. Too much dust on the radiator will greatly increase power consumption.

Tips for saving electricity in refrigerator

Li Chen, a salesperson of Hainan Xinxing Electric Appliance Co., Ltd., told the reporter that the a++ class energy-saving refrigerators currently appearing on the market are more energy-saving than ordinary refrigerators. Household energy-saving refrigerators generally consume 0.5-0.8 kWh/day, while ordinary refrigerators generally consume 1- 1.5 kWh/day, which can save electricity by about half. In addition, in the process of using the refrigerator, we should pay attention to the following issues:

1. Don't put the refrigerated goods too close, leaving a gap to facilitate the circulation of cold air, make food cool faster, reduce the number of compressor operations and save electricity. ......& gt& gt

How to distinguish stealing electricity

Section 2 Basic Methods of Common Electricity Stealing

The so-called stealing electricity refers to the behavior of power users stealing electricity by various means for the purpose of illegally occupying electricity.

The ways of stealing electricity can be summarized into two categories:

Tampering with the electric energy meter, transformer and secondary circuit makes the metering device less or not counted.

Stealing electricity on the primary circuit in front of the metering device, bypassing the metering device to use electricity, so that it does not measure.

Section 2 Basic Methods of Common Electricity Stealing

The electric quantity measured by electric energy meter mainly depends on the product of voltage, current and power factor and time. Therefore, as long as any one of these three factors can be changed, the watt-hour meter can slow down, stop running or even reverse, thus achieving the purpose of stealing electricity.

Section 2 Basic Methods of Common Electricity Stealing

First, the undervoltage stealing method

Second, the current method of stealing electricity

Third, stealing electricity by phase shifting method

Fourth, the difference between stealing electricity

Five, no table method to steal electricity

Six, new technology and methods of stealing electricity

First, the undervoltage stealing method

Stealers use various methods to deliberately change the normal wiring of the electric energy metering voltage loop, or deliberately cause the metering voltage loop to fail, causing the voltage coil of the electric energy meter to lose voltage or step down, so as to achieve the purpose of measuring less electricity. This way of stealing electricity is called undervoltage stealing electricity.

Second, the current method of stealing electricity

Stealers use various methods to deliberately change the normal wiring of the metering current loop, or deliberately disable the metering current loop, so that the current coil of the watt-hour meter does not pass or only passes part of the current, thus achieving the purpose of measuring less electricity. This method of stealing electricity is called undercurrent stealing electricity.

Third, stealing electricity by phase shifting method

Stealers deliberately change the normal wiring of the watt-hour meter through various methods, or connect the voltage and current that are not electrically connected with the coil of the watt-hour meter, and some even use the specific connection of inductance or capacitance, thus changing the normal phase relationship between the voltage and current in the coil of the watt-hour meter, resulting in the watt-hour meter slowing down or even reversing. This method of stealing electricity is called phase-shifting stealing electricity.

Fourth, the difference between stealing electricity

Stealers disassemble the watt-hour meter privately, and change the internal structure and performance of the watt-hour meter through various methods, which leads to the error of the watt-hour meter itself expanding, and destroys the running state of the watt-hour meter by using current or mechanical force, thus hitting the purpose of measuring less electricity or not measuring electricity. This method of stealing electricity is called the extended difference stealing method.

Five, no table method to steal electricity

It is called electricity stealing without meter if the wiring of the power supply department is not registered and installed, or if the meter users do not read the meter.

Six, new technology and methods of stealing electricity

Steal electricity by using an electricity stealing device.

There are generally two kinds of electricity stealing devices: electric and electronic.

The electricity stealing device can output a large reverse current, which makes the electric energy meter stop or reverse when it is loaded;

The power stealing tool of electromagnetic interference instrument makes the instrument not turn, slow down and reverse;

Permanent magnet stealing makes the meter inaccurate;

Electronic bugs are generally installed in the metering box, and the bugs can be operated remotely to achieve the purpose of stealing electricity.

Six, new technology and methods of stealing electricity

Stealing electricity by using watt-hour meter programmer

The characteristics of stealing electricity are as follows:

Neither the time nor the time period of the electric energy meter is changed, and there is no need to turn on the electric energy metering device. Instead, the electric energy meter programmer is used to change the proportion of peak, average and valley electricity consumption, that is, to reduce the peak and average electricity consumption and increase the valley electricity consumption, so as to keep the total electricity consumption unchanged and use the electricity price difference to achieve the purpose of paying less electricity bills.

Section 3 Anti-theft Technology

The so-called power theft prevention refers to all activities that make it difficult for power users to steal electricity by taking management measures or technical measures before power theft occurs.

Section 3 Anti-theft Technology

I. Organizational measures to prevent electricity theft

Second, technical measures to prevent electricity theft

I. Organizational measures to prevent electricity theft

(a) Organizational measures to prevent electricity theft

() Establish a set of systematic and standardized management methods for power consumption inspection. To stipulate and standardize inspection procedures, inspection disciplines and handling rules, so that there are rules to follow and those who violate the law will be prosecuted.

() Organize technical training to improve the technical quality of business personnel.

() Strengthen professional ethics education and improve the ideological quality of business personnel.

() Strengthen legal education, so that power users can consciously safeguard the interests of power enterprises with legal weapons.

I. Organizational measures to prevent electricity theft

(a) Organizational measures to prevent electricity theft

() Strengthen the publicity of laws and regulations related to power supply and consumption, such as the Electricity Law, so that users can know the law and abide by it.

() Strengthen law enforcement and investigate and deal with electricity theft according to law.

() Organize the formulation of anti-theft management system, and urge grass-roots teams to implement it.

() The line loss contract evaluation system shall be implemented.

I. Organizational measures to prevent electricity theft

(a) Organizational measures to prevent electricity theft

() Organize and carry out many general surveys of electricity consumption and regular electricity consumption inspections or surprise inspections every year.

() Organization System ... >>

As a local electrician, how to deal with electricity theft?

This is an illegal act and will be dealt with by the public security law according to law! The degree of handling is related to stealing electricity and its consequences and effects! As a citizen of China, you have the right to report to the electric power department or the public security organ!

How to punish private electricity theft?

Serious suspicion of theft.

Can be sentenced to fixed-term imprisonment of not more than three years or criminal detention.