Can electric vehicles be equipped with GPS locators?

Can be installed, according to the quality of different prices. Judging from the theft data in recent years, the number of electric vehicles stolen by criminals remains high, so it is necessary to install GPS locators for electric vehicles.

Installation position

1. The electric vehicle GPS locator can be installed at the headlight of the electric vehicle lamp, which is convenient for taking power and hiding.

2. It can also be installed near the code table, but remember that when installing, the front of ET 100 must keep up, and there can be no metal objects on it. ET 100 is best packed in plastic bags.

3.ET 100 can also be installed under the pedal.

method of erection

1, power supply line installation

In general, a standby power interface will be reserved on the controller. Connect this interface with the corresponding interface on the GPS anti-theft device of electric vehicle. As long as the indicator light on ET 100 flashes normally, there is no problem. If there is no corresponding interface, the red line on ET 100 can be connected to the thickest red line on the controller, and the black line can be connected to the thickest black line on the controller (if the vibration alarm function is not needed, the ACC line can be connected to the red line of the battery).

2.ACC line installation

The connection of ACC line is very important. You can find the ACC line on the switch lock, as long as you ensure that there is more than 30V power supply when driving and no power after parking.

Generally, electric door locks are connected to the positive pole. Before installation, you can use a multimeter to confirm the connection position. (The GPS anti-theft device of electric vehicle relies on ACC line to detect whether the vehicle is driving or stationary, which is mainly used for fortification and cancellation of vibration alarm, but the ACC line connected to the positive electrode does not have this function. ).