Is the house installed incorrectly or damaged? How to install heating for the first time?

Installing heating is an important job, which needs careful consideration and preparation. If improperly installed, it will not only affect the heating effect, but also lead to serious consequences such as installation errors or house destruction. Let's take a look at it with the golden flagship flag brother.

Keywords: how to install the heater for the first time and how to install the radiator.

Simplified version: how to install heating for the first time? Wrong installation or destruction of the house! Installing heating for the first time is an important task, which needs careful consideration and preparation. If improperly installed, it will not only affect the heating effect, but also lead to serious consequences such as installation errors or house destruction. Therefore, before installing the heater, you must read the installation instructions carefully, choose the radiator suitable for your family, pay attention to safety, and choose professional installation companies or technicians to ensure the integrity of the pipeline. If you are not sure how to install the heating, it is best not to take risks and choose a professional to install it.

First of all, the first installation of heating needs to understand the standard process of radiator installation.

1. Before installation, the manufacturer should send someone to the owner's house to conduct field measurement to understand the characteristics of the apartment, decoration style, family preferences, etc. , and then according to the requirements of the owner to carry out scientific and reasonable design, determine the type, model, quantity, water inlet and outlet mode and actual installation position of radiator. Then, the owner can choose the radiator products suitable for his own use according to this design scheme.

2. According to the previously designed scheme, the pipeline shall be laid by slotting on the ground or wall, and at the same time, pay attention to laying steel grooves in the branch pipe to protect the pipeline. If it is a surface-mounted installation method, the pipeline laying lines are generally in hidden places such as ceilings and skirting lines, so as not to affect indoor decoration or occupy too much space.

3. Step 3, install the radiator. During installation, the radiator should be placed stably, and the valve port connector should be connected with the inlet and outlet valves. Use a level to measure whether the radiator is straight and whether the pipeline installation meets the requirements. After inspection, reinforce and tighten the joint with pipe tongs. Generally speaking, radiators are usually placed under the windows of external walls, or behind doors and on the walls next to windows, where furniture will not be arranged. This will not affect the overall decoration layout, but also make the indoor space look spacious and bright.

4. If it is a home independent heating system, the fourth step is to install a wall-hung boiler. When installing, attention should be paid to separating from open wires and electrical equipment, and inflammable and explosive articles should not be placed around to prevent dangerous accidents.

Finally, a very important step is to suppress the test. When the construction personnel carry out the stamping test on the pipeline, there is no phenomenon such as running, running, leakage and dripping, and it is qualified, otherwise it needs to be inspected and maintained.

Secondly, choose the radiator suitable for your family, consider the decoration style and color, and ensure that the radiator is in harmony with the family decoration.

There are many radiator brands on the market, and the general big brands are relatively guaranteed in quality and performance. I suggest you choose a brand with high popularity and good reputation.

Product quality is the foundation of brand survival, and it is also a concern of consumers. Because consumers want to buy radiators with great value for money, we can investigate the materials and technology of radiators.

Secondly, before installing the heating, be sure to turn off the heating system and drain the water side by side. This can prevent water from entering the pipeline and causing accidents during installation. At the same time, check whether the pipeline is leaking or damaged to ensure the integrity of the pipeline.

Next, you need to remove the old radiator. This requires careful operation to avoid damaging pipes or walls. Before removing the old radiator, close the valve on the pipeline to prevent water from entering the pipeline.

When installing a new radiator, it needs to be cut and connected according to its size and shape. When connecting pipes, pay attention to the direction and position of the pipes to ensure that the pipes are connected correctly. In addition, a torque wrench is required for fastening, so as to ensure that the pipeline is firmly connected.

Finally, tests are needed to ensure that the heating system works normally. When testing, pay attention to whether the pipeline leaks or not, and whether the radiator can be heated normally.

1, check the tightness of the heating system.

The safety and tightness of heating system is very important, so we must pay attention to the place where there is no water leakage to prevent unnecessary losses caused by water leakage accidents. Pressure test after installation is also essential. Usually, the installer will reserve a valve on the pipeline to facilitate the stamping test after construction. The general radiator can withstand pressure 15 kg, and the pressure test pressure is 8 kg, and the high-rise residential area can reach 10 kg, which proves that there is no phenomenon of running, running, dripping and leaking, and the acceptance is completed.

2. Check whether the heating system is installed firmly.

The radiator itself has a certain weight and is fixed in a corner of the room for many years. If the installation is not firm, there may be some security risks. We can shake the radiators and pipes by hand and repair them immediately if they are loose. At the same time, check whether the heating pipeline is rusted, bent, double-skinned, uneven, and whether the pipeline is off-set, reversed, broken wires and inaccurate angles. If these problems occur, the construction party shall be responsible for maintenance.

3. Check the piping system of heating system.

When installing the radiator, the gradient of the inlet and outlet pipes should meet the requirements, and the level meter, stay wire and ruler can be used to check or measure the records. The reason of uneven pipeline slope is that the main pipe opens again after installation, the interface is not straight after installation, or the elevator is not tight, the riser is not tight, and the connection investigation was not carried out during pipeline prefabrication. When the temperature is uneven during heating in winter, the riser of each branch pipe and the valves on the branch pipe should be adjusted to make them basically balanced before formal acceptance.

4. Check the use effect of the heating system.

Whether the hot water entering the house is hot or not, you can feel it with your hands. It can be hot or hot. If the water is not hot, find a property solution. If the water inlet is hot and the radiator behind it is cold, this situation is mainly caused by gas in the system. The exhaust valve above the radiator must be used to exhaust the gas until water flows out. Tighten the exhaust valve. If the system is blocked, it needs to be removed and checked separately, otherwise the radiator is not hot, which will affect the normal heating at home.

In short, the first installation of heating needs careful consideration and preparation, follow the correct installation steps and pay attention to safety. If you are not sure how to install the heating, you'd better choose a professional installation company or technicians to ensure safety and quality.