Requirements and safety measures for aerial work

Safety protection measures for aerial work are as follows:

1. Any work more than two meters above the ground belongs to aerial work. All aerial workers, no matter what type of work, should take relevant safety precautions at the working time and place;

2, personnel engaged in aerial work, must have a physical examination. Anyone suffering from hypertension, heart disease, epilepsy, acrophobia and other people who are not suitable for aerial work are not allowed to engage in aerial work;

3, before aerial work, should carefully check the safety equipment, such as safety helmet, seat belt, ladder, springboard, scaffolding, etc. If it does not meet the requirements, it should immediately improve or reject aerial work.

Legal basis: Article 1253 of the Civil Code of People's Republic of China (PRC).

If buildings, structures or other facilities and their shelving and hanging objects fall off and cause damage to others, and the owner, manager or user cannot prove that he is not at fault, he shall bear tort liability. After compensation, the owner, manager or user, if there are other responsible persons, has the right to recover from other responsible persons.

Article 1254

It is forbidden to throw objects from buildings. If an object thrown from a building or an object falling from a building causes damage to others, the infringer shall bear tort liability according to law; If it is difficult to determine the specific infringer after investigation, in addition to being able to prove that he is not an infringer, the user of the building who may cause harm shall be compensated. After compensation, the user of the building who may cause damage has the right to recover from the infringer.

Property service enterprises and other building managers shall take necessary safety measures to prevent the occurrence of the situations mentioned in the preceding paragraph; Those who fail to take necessary security measures shall bear the tort liability for failing to fulfill their security obligations according to law.

In case of the circumstances specified in the first paragraph of this article, the public security organ and other organs shall promptly investigate and find out the responsible person according to law.

What are the types of aerial work?

1, limb manipulation. Limb operation refers to the high-altitude operation with no fence at the edge of the working face on the construction site or with a fence height less than 80 cm;

2. Mountain climbing. Climbing operation refers to aerial work under climbing conditions with the help of climbing facilities on building structures or scaffolding, or with the help of climbing facilities such as ladders;

3. Cross homework. Cross operation refers to the simultaneous aerial work at different levels in the construction site under the state of space penetration;

4, the hole. The hole operation refers to the hole and the operation next to the hole. Usually refers to floors, roofs, platforms, etc. In the horizontal direction, the short side is less than 25cm, and the hole is equal to or greater than 25cm.

5. Pause the operation. Hanging operation refers to working at heights when there is no one around.