Annual work summary of employees.

Summary is to review and analyze a certain period, a certain project or a certain work afterwards, so as to draw regular conclusions. It plays a connecting role in our study and work, so it is very necessary to write a summary. So how to write a summary in a new way? The following are six articles I compiled for you to summarize the annual work of employees, which are for reference only and I hope to help you.

Annual work summary 1, employee, began to be an experimenter in September. After a lapse of half a year, he lamented that time flies and the hard work has come to an end for the time being. Here, I will sum up some experiences accumulated in my work over the past few months, and ask my colleagues and predecessors to provide valuable advice. When I first came to work in the project department after graduation, I suddenly changed from a student to a worker. I knew little about experimental work and had to start from scratch. When I first started working, I often made mistakes, and I often made mistakes in writing the inspection letter of appointment. I can't drive, which delays the test and affects the normal work of the data. Although I encountered many difficulties during this period, with the care and help of other colleagues in the project department, I walked smoothly and my work gradually got on the right track. As an experimenter, I dare not slack off in my work. I ask myself to write down the gains and losses in my work and every problem as a lesson. When I encounter problems or difficulties in my work, I will consult my colleagues and leaders and listen to their opinions and suggestions patiently. No matter what kind of work you are engaged in, you should recognize your job responsibilities, know what you need to do, and then how to do it.

As a civil engineer, the first point I want to emphasize is to pay attention to "time". Time is very important for engineers. According to an example, standard concrete test blocks will be sent for inspection after 28 days. If there is a weekend, it can be two days in advance, but if it exceeds 3 1 day, the report will be invalid. It is also important to get the test report in time. For example, when we do the mechanical connection test of steel bars, we should first do the raw material test of steel bars, and then wait for the results. Then do the process inspection, and then wait for the results to come out before doing the construction connection test. If the mechanical connection of steel bars is not submitted for inspection in time, it shall be submitted for inspection after sealing or pouring concrete. If it is unqualified, the consequences will be very serious. One step behind, one step behind. Therefore, as an experimenter, we must submit the inspection on time and get the report.

The second point is the sampling of concrete blocks. Concrete test blocks are divided into standard curing compressive test blocks, same condition curing test blocks and impermeability test blocks, among which impermeability test blocks are only standard curing. See the specification for the retention method and test block practice, but it must be carefully analyzed. The problem often lies in the basement. One is to keep a set of standard curing test blocks. The concrete does not exceed the same mixture ratio of 100m3, but not the same strength grade. The external wall is impervious and the interior is ordinary concrete. The total amount of concrete of two mix proportions exceeds 1000 m3, but one of them does not exceed it, so it cannot be combined, and a set of standard curing tests shall be left every 200m3. Similarly, if there are no more than three groups of the same condition curing test blocks in the basement, we should add another group.

When making test blocks, the following points should be noted:

1. Before molding, check whether the test mold is in good condition, whether there is any defect on the edge and whether there is any crack on the side wall. If the above situation occurs, it should be replaced in time. Prevent slurry leakage from the test mold, which will reduce the size of the test block and affect its strength.

3. When making a test block, if the inner wall of the test mold is coated with too much waste engine oil as an isolation agent, the mold is not removed in time according to the specified time after molding. The failure occurred because the surface of the test block was eroded by excessive waste engine oil in the early strength growth stage. However, the surface strength of the test block is lower than the internal strength, and when it is tested on the press after reaching the age, it is often crushed first because of its low surface strength.

2. The more stones in the test block, the stronger the strength of the test block, so when making the test block, try to add as many stones as possible, but not too much.

3. Don't think that long-term vibration can make it dense or high in strength, and the vibration should continue until the surface becomes slurry, so as to avoid excessive vibration and prevent concrete segregation.

The third emphasis is that as an experimenter, he should also be responsible for the dynamic monitoring of the standard curing room on site to meet the requirements of block curing. The standard room requires a temperature of 20±2Co and a relative humidity of ≥95%. There are a few points I want to emphasize. On the working face of the test block, indicate the project name, pouring position, retention time, concrete label and curing method. Test blocks shall be inspected separately according to standard curing and standard curing, and the test blocks shall be placed in an orderly manner. This will not only prevent you from taking the wrong test block, but also remind yourself how long it will be before the latest inspection when observing the standard curing room, so as not to miss the inspection time.

Fourth, emphasize the understanding and contact with the testing center. Do you know what the people in the testing center are responsible for? Convenient for future work. What are the requirements for samples? Such as the size of concrete specimen, sample delivery time, length and quantity of reinforcement specimen. Check the required procedures, entrustment, witness and payment methods. The time for each testing center to issue reports is different. Know when the report was sent out so as to get it back in time.

The fifth key point is the drawing, which is the instruction and basis of site construction. The structural design in the drawings shows that there are many details that are very important for detection, such as the strength grade of concrete, the impermeability grade of concrete, the diameter, model, quantity, connection mode and location of steel bars, etc. Types of backfill soil and compaction coefficient.

In the process of work, I deeply feel the urgency of strengthening my own study and improving my own quality. First, while working, I actively study the knowledge of testing and constantly improve my professional level. Through the combination of theoretical study and on-site practice, I accumulated on-site practical experience bit by bit, fully grasped the standards and specifications of various test and detection, understood the detection process, and earnestly did every detection work to ensure the engineering quality; Second, learn from the predecessors around you, keep a modest and cautious attitude in their work, and learn their work style and methods to deal with problems; The third is to learn from practice and apply what you have learned to practical work.

In practice, we should check our knowledge, find out our shortcomings, improve ourselves, and prevent and overcome the tendency of superficial knowledge. Contact more project tests in the laboratory one after another, define the working procedures, and form clear working ideas in specific work, so as to carry out the work smoothly and complete the work skillfully and successfully.

Finally, I want to say that we should not be afraid of making mistakes now. Do it boldly if you are timid, but you must sum up and correct your mistakes in time, accumulate more experience and strive for early maturity.

The above is my experience since I joined the work. Please give me your advice.

Annual work summary of employees 2 Dear Chairman, leaders and colleagues,

Hello, everyone.

I'm XXX from XXX department. Time flies. Time flies. Unconsciously, I have been in the company for more than a month. During this month, I learned about this company and its culture. The company's purpose, company spirit, company style, and everything about the company made me have a strong shock in my mind.

When I came to the company, I realized that study is more important than work. Only by raising awareness and changing ideas can we adapt to the company and keep up with its pace. Only with purpose, planning, knowledge and motivation can we do a good job and do a good job; Only according to the strict, meticulous, fast and pragmatic requirements of the company culture can we make fewer or no mistakes in practical work.

I am still a child with low ideological understanding, insufficient social experience, poor interpersonal communication, lack of exercise, lack of polishing and impetuous, which is far from the company's elite standards. However, the company gave me confidence and courage, and gave me room for growth. I believe that I will soon grow from a child to an elite in the company, realize my dream and realize the company's "Hundred Flowers" goal.

In this month, I mainly studied XXX, XXX, and the preparation of various reports. Although this work is not very complicated, it is crucial, because it is directly related to XXX, XXX of the company and XXX of our customers. A slight mistake will cause losses to the company. It can be said that it is a screw on the plane, although it is small. During this time, I learned a lot from XXX, and the company's services-sincerity, enthusiasm and thoughtfulness-were vividly reflected in him. When he is doing his job,

He will explain it to me while doing it, and he will continue to patiently guide me and teach me again and again when I do my homework. After each work, he will check it once or twice, or even more times, to prevent mistakes, especially when making a report at the end of this month, he checked it more than ten times, from numbers to date formats, which fully reflected the company's rigorous, meticulous, fast and pragmatic style, and benefited me a lot.

In the future work, I will do my own work in a down-to-earth manner, seriously study the company culture, raise awareness, change my ideas, ask colleagues and leaders for advice, put my energy into my work, and ask myself to seek truth from facts in everything I do, unite and help each other with colleagues, learn from each other and do my work well. Cultivate good habits, improve your skills, be diligent, rigorous, realistic and refined with practical actions, be strict with yourself with the company spirit, style and service, and complete all the work assigned by the leaders seriously, carefully, timely and accurately.

As a member of the company, I will integrate into the company's big family, study hard, establish a correct social outlook, outlook on life and values, be strict with myself in life and work, maintain the company's image, live up to the expectations of leaders in my work, enhance my work concept, consciously maintain the normal order and work order of the company, and devote myself to work and study. I will be firm in my belief, proactive, honest and trustworthy, study hard, devote myself to my work with better mental state and higher enthusiasm, contribute my strength to the development of the company, and strive to become a real company person as soon as possible! ! !

Employee's annual work summary 3 I joined the project management department of the company through recruitment on June 65438+February 10, 20 ××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××××× From the engineering construction unit to the engineering construction unit, although my job position and role have changed greatly, it is also my first time to contact the budget quota of Zhejiang construction project, but with the care of the leaders and the help of my colleagues, with my professional foundation and work experience, plus hard study and research, I quickly adapted to the working environment and achieved good results. The work is summarized as follows:

I. Resume

1September, 1996 to1July, 1999, majoring in engineering cost in Hunan Urban Construction College. 1From July, 1999 to July, XX, I worked in the Fourth Engineering Co., Ltd. of China Railway 19th Bureau Group, engaged in budgeting, contract management, bidding management, etc. XX years 10, participated in and passed the national cost engineer qualification examination.

II. Main achievements and achievements

1, strictly abide by the company's rules and regulations. At the beginning of my work, I carefully studied the Vico outline, the daily code of conduct of employees in the real estate sector, the basic management system, the job function description and other rules and regulations, and kept them in mind, reminding myself to strictly abide by the company's rules and regulations and maintain the company's image. For example, come to work early every day, clean the office and create a clean working environment for colleagues.

2. The final accounts audit of winding workshop and temporary works of Vico Flavor Group Co., Ltd. Dunhuang Branch is progressing smoothly. Although the winding workshop and temporary works have been completed for a long time, the relevant completion information is very incomplete, which brings great difficulties to the final accounts audit. After I took over this job, on the one hand, I actively asked the construction unit to improve the completion data, on the other hand, I used the existing data to count the number of projects and check all the data. In order to accurately grasp the engineering situation and ensure the accuracy of calculation, I also went to the site to take a closer look. Through my efforts, this work is progressing rapidly at present, most of the materials needed for the final accounts audit of the project have been collected, and the budget of the winding workshop has been checked with the construction unit.

3. Actively start the civil audit of the commercial and residential building on plot 8 of Huayan Street. After the leader arranged for me to be in charge of the civil budget audit of the project, I took the time to familiarize myself with the construction drawings and related materials and went to the construction site several times to understand the situation.

4. Other aspects: ① Actively put forward reasonable suggestions to leaders, such as cost control and data management; ② Actively discuss cost control, contract management and data management with colleagues. Through discussion, not only the friendship between colleagues is enhanced, but also the professional ability is improved; ③ Actively communicate with colleagues and help others enthusiastically; ④ Take an active part in various activities organized by the company, such as studying in party member and performing in the Spring Festival Evening.

Annual work summary, an employee, thanks to the concern of school leaders and the help of colleagues. Thanks to everyone's encouragement and affirmation, I have made some achievements in my work. There is a saying in the words of ordinary people, "Do a line and love a line". Although in the eyes of others, it may be that my work is too ordinary, but it is my love of work that makes me try my best to make my own wonderful work in an ordinary post. 20xx years later, I sorted out my work and made a work summary.

First, do a good job in hygiene and create a warm environment

I have been the monitor of the kitchen since I entered the canteen. I have seen many food poisoning incidents on TV, so the factory leaders attach great importance to this aspect, and I have never relaxed myself. From selecting vegetables to washing vegetables and cooking, it can be said that our kitchen strictly controls all the passes, and there is no food poisoning incident, which responds well to the call of factory safety production and safety management. After every meal, we always clean up the garbage and leftovers at the first time, and clean the canteen regularly, so as to clean it every day without interruption. It creates a clean and hygienic dining environment for the employees of the whole factory.

Second, reduce the cost of buying food and renovate the dishes.

As the first pass in the canteen, my task of buying food is very arduous. Based on the principle of welfare for employees, the price of vegetables is lower than the market price. Therefore, I must reduce the cost of buying vegetables, so as to cooperate with the work of the canteen. It is necessary to ensure the freshness of the dishes and buy low-priced products. Many times, I always pick from one end of the market to the other. Although the work is arduous and hard, I am glad to see that everyone can eat delicious meals.

For recipes, our kitchen class also holds regular discussion meetings. Through continuous learning, we have been improving our ability. Make sure that the food is not heavy every day, the diet structure is rationalized, and there are many dishes with vegetarian dishes. Try your best to make everyone eat well.

Third, play an exemplary role and strive to satisfy everyone.

As the monitor of the kitchen, in addition to coordinating the internal work and division of labor, I always take the lead in my daily work, not that I am taller than others, but that since I am a small leader, I must set an example at any time. If you don't do it, others will slack off. In short, I try my best to make everyone satisfied with our food and kitchen work!

I'm growing and improving. I will try my best to do my job well. In the new year, I will create a more satisfactory and comfortable canteen environment for everyone, so that everyone can eat well and have good health. I will also try my best to make the canteen well!

5-20xx years is fleeting. Over the past year, with the care and guidance of leaders and the help and support of my colleagues, I have been strict with myself, studied diligently, made positive progress, worked hard to improve my theoretical and practical level, successfully completed various tasks, and comprehensively improved my quality and ability. The work of the past year is summarized as follows:

I. Review of Work in 20xx

(1) Actively participate in the annual, quarterly and monthly work summary and planning of the Group. Cooperate to complete the 20xx annual work summary, sort out the 20xx annual work plan, prepare the first draft, and submit it to various companies and departments for approval; Complete the preparation and submission of 20xx April-1 1 work plan; Complete the work summary in the third quarter of 20xx and submit it for approval; Cooperate to complete the compilation of ***3 issues of 20xx annual industrial and commercial management bulletin; Assist in writing the first draft of the leader's year-end speech; Complete the related work of 20xx annual evaluation activities.

(II) Actively organize and manage company meetings. By the end of June 1 1, complete the organization of 20xx1-1* * general manager's office meeting and monthly work meeting, complete the meeting notice and sign-in, and plan the meeting minutes; Assist to complete other meetings organized by the department (management consultation meeting, monthly evaluation meeting, etc.). ); Assist in the preparation and implementation of the 20xx workers' congress of the Group, Yerui, Huazi Construction Company, Huazi Decoration and Huayu Property.

(3) Seriously cooperate with the quality management system. Participated in the internal audit of quality management system of Longwan Project, Shangyuan Project, Tiangong Flower City Project, Jinxiu Flower City Project, Jinsha East Coast Project, R&D Center and Marketing Center of Group Development Corporation in 20xx; Participate in and assist in the supervision and audit and renewal audit of 20xx Group, Huazi Construction Company, Huazi Decoration Company and Huayu Property; Complete the update and distribution of quality system documents; Complete the statistical summary of annual quality plan and monthly quality completion of each department of the development company; Supervise the rectification of problems and nonconformities; Cooperate with 98 employees to complete the qualification training and evidence collection of internal auditors, and go through relevant procedures.

(IV) Actively participate in the construction of the company's management system. Assist to complete the revision of departmental work manual; Complete the preparation of the general manager's office meeting system and media information monitoring management measures; Assist to complete the signing of management target responsibility book and file management.

(5) Do a good job in the copywriting of foreign newspapers and periodicals. Complete the proposal of "Suggestions on Further Improving the Efficiency of Examination and Approval of Construction Projects" at the First Session of the Fourth Session of the Chinese People's Political Consultative Conference and handle the negotiation proposal; Complete the Proposal on Supporting the Transformation, Upgrading, Innovation and Development of Private Economy for comments and feedback; ,

Assist in the drafting of "Completion of Supporting Documents for Private Economy 1+3"; Complete the drafting of application materials for outstanding entrepreneurs; Complete the manuscript of the new real estate thinking "Reflections on the Construction of Real Estate Enterprise Culture under the New Situation".

(6) Do a good job in plan management and performance appraisal. Complete the preparation and approval of 10- 1 1 monthly plan; Check the completion of the project progress *** 1 1 times, summarize the inspection results and report them; Complete the summary calculation of individual performance appraisal in April-10; Complete the statistical calculation of department performance appraisal in June 5438+00.

(seven) the successful completion of the tasks assigned by the leadership. Complete the data collection and preliminary contact of management consulting company, and cooperate with relevant work in the consulting process.

Second, the harvest and deficiency

After a year's study and practice, I have gained all-round growth and realized more deeply:

(1) Thought is the basis of doing a good job. After 20xx years of tempering in my daily work, I have formed a stable state in my mind. In my work, I constantly remind myself to remember the words "Emancipate my mind and change my ideas", form an unconscious behavior consciousness, think about problems from different angles, carry out work, and adapt to the overall situation of the enterprise.

(2) Efficiency is a sharp weapon to win. Like organizations, individuals who work efficiently usually get more output. Efficiency is the result of the best work passion, good working methods and suitable tools. Therefore, when setting the efficiency goal, it will promote the individual's work passion, urge the individual to find the right working method and use the right tools, and finally promote their own growth.

(3) Innovation is the driving force for continuous progress. For individuals, continuous innovation in work is conducive to improving work efficiency and enhancing work passion. In the work, we should be good at breaking the old and innovating the new, and have new thoughts on the existing performance appraisal and planning operation.

(4) Only by being practical can we achieve our goals smoothly. No matter how lofty the ideal is, it needs to be realized step by step.

(5) The goal is to move in a reasonable direction. Personal study and work must be tailored to your own needs, not delusional or delusional. Only the right goal will guide you in the right direction.

Over the past year, there have been achievements, but there are also many shortcomings: the initiative of the work needs to be further improved, and it has failed to optimize and change its own presiding work; The mastery of technical knowledge of the project needs to be further strengthened, and the overall concept needs to be further strengthened in order to be further familiar with the new plan management; I failed to fully realize my personal goals. In the next year's work, I will strengthen my study and innovation, and constantly improve the above shortcomings.

Three. 20xx work plan

The year of 20xx is the last year for the Group to realize the "Fourth Five-Year Plan", the year for the company to expand its scale, and the year for the new management and control mode to be fully implemented. Various contradictions will become more and more prominent, and we will face more and more complicated problems and difficulties in our work. Therefore, under the leadership of the new department leaders, I will work with my new colleagues to strictly perform my duties, better complete various tasks and further improve myself. Personal planning for 20xx years is as follows:

(1) Seriously study the knowledge of planned operation management, and do a good job in the planned management of companies in Chongqing. According to the results of management consultation, new work plan templates and evaluation templates should be established to improve the effectiveness of plan management. Further study the knowledge of engineering projects, go deep into the front line, understand, supervise and feedback the implementation of the plan, and cooperate with the leaders to do the relevant coordination work.

(2) Cooperate with the organization performance appraisal. Under the new performance appraisal mode, cooperate with the monthly, quarterly and annual performance appraisal of regional companies, give full play to the role of performance management, and improve organizational and personal performance.

(III) Cooperate with regional company system construction and quality management. Under the new management and control mode, improve the system and publicity of regional companies and do a good job in the 20xx quality management system.

(4) Do a good job in meeting organization and management. Organize meetings of regional companies according to the requirements of the meeting management system in the consultation results.

(5) Be more proactive, be brave in taking responsibility, successfully complete various tasks assigned by leaders, and do a good job in office work with department leaders and colleagues.

(six) to strengthen self-study, improve self-cultivation, and strive to set an example in work and life. Set up the overall situation of the work, be able to be independent in the work and make contributions to Huayu's cause; Strive to obtain the qualification of economist and get a promotion in rank.

Summary of annual work of employees Chapter VI I learned a lot in the company for a month. When I first arrived at the company, I was very confused and didn't know what I could do. I try to adapt to life here as soon as possible. With the help of my colleagues, I am getting better and better, and the manager is very satisfied with my performance.

On the first day I came to work in the company, I was assigned to the marketing department, where all my companions had their own owners. I sat there alone reading the materials and felt so disappointed. Many sisters sitting behind me took the initiative to chat with me and asked me to ask some business questions when others were free, so I tried to ask some questions that I didn't understand. Their answers feel good. Some knowledge I didn't learn in school will be good for me to find a job in the future.

The return of sister Yang Li has given me more help. She gave me confidence again, and I no longer worried about my temporary troubles. My mood is getting better and my relationship with my colleagues is getting better and better. I feel the warmth of home here. I left my original position and sat next to Xiu Jie as the employees of the branch came to study in the headquarters. What she taught me was to be a lively and cheerful person. No matter how I work or study, failure is only temporary. My usual job also taught me how to use the fax machine, how to answer the phone and how to transfer the phone. In retrospect, I learned too much. Thank you for giving me this opportunity.

Then I went to the brand operation department. Follow brother Xu all day to investigate the number of households and consumption level near the direct store. In the past week, I learned the basic operation methods, and also found some shortcomings in my work, such as not positioning myself properly and not being able to communicate well with others.

Generally speaking, I learned a lot during my month in the company. Thanks to the help of the company's big brother and sister, and thanks to the managers of all departments. I would like to work in your company if there is an opportunity.