How to build the bridge of Haikang elevator

Question 1: How to install Hikvision elevator transmission dedicated wireless bridge? One is installed above the car and the other is installed in the motor room.

Question 2: Is the method of connecting the wireless bridge and the Hikon video recorder activated? Maybe the firmware of the video recorder needs to be upgraded.

Question 3: How to set up a dedicated wireless bridge for Hikvision ds-3wf0 1c-2ne elevator monitoring? If you can't set it up, you can consult the dealer or manufacturer's customer service who bought the equipment, and they will provide you with technical support.

Question 4: Hikvision NVR accesses the network camera through the wireless bridge. There are a few tips. The network is unreachable, but the computer access is normal. Five points confirm several problems:

1, can I access the camera separately through the intranet IP?

2. When you say that NVR can't be accessed, do you mean that NVR can't be directly connected to VGA display network, and the IP address of NVR can't be output or opened when accessed through PC?

3. Your domain name prompt is not registered on the server. Please check whether you have mapped the port for external network access.

Question 5: How to set up a wireless bridge according to fluorite cloud monitoring? First, make sure that the wireless bridge is turned on. If it is turned on, you can regard the bridge as an invisible network cable, just set your camera on fluorite 7APP.

Question 6: What are the requirements of elevator monitoring for wireless bridges? We should ensure the signal from the top of the building to the bottom of the building and try to reduce the video jam.

Question 7: How to realize the transmission of digital high-definition monitoring in elevators through better wireless bridges? It is best to choose 5.8G, because 5.8G is much less disturbed than 2.4G.

You can choose WB5800MN 1-I- 19. First, install a bridge on the top of the elevator car and a bridge on the top of the elevator patio to form opposition. This kind of bridge can transmit 2 kilometers in an open place, so it is no problem to transmit 100 meters in the elevator. Moreover, some friends have used it, and the signal is relatively stable, which can be used as a reference.

Question 8: How to connect a camera (video camera) with a wireless bridge? Hello, it doesn't matter if there is no network in the two buildings of AB, because we are bridging now to make a local area network, and we don't need an external network.

Transmission can be achieved in the following ways:

Front-end: if it is a bridge camera, it is directly connected to the switch, an ordinary BNC camera.

It should be an analog camera, so it is necessary to install a video server, that is, an encoder, to convert analog signals into digital signals and then connect them to the switch, and then send them back to the monitoring center through the wireless bridge. (The bridge is integrated, and the antenna is above 12dbi. )

Back-end (monitoring center): use wireless bridge to receive and then connect to the switch. If the display is a personal computer or the like. It has its own soft decoding, and you can directly see the back-end image when you connect. If it is on the TV wall, it is necessary to install a decoder to decode the digital signal into an analog signal, and then install a picture splitter, so that you can see every monitoring image.

Question 9: The elevator camera uses a wireless bridge. What's wrong with intermittent images? At 20: 00, you need to use wireless equipment in 2.4GHz band, which is vulnerable to radio frequency interference. Interference sources are generally household wireless routers, microwave ovens, Bluetooth devices, mechanical engines, and the interference of the same equipment nearby. It is recommended to select wireless devices in other frequency bands for transmission.

ybptgroup

Question 10: How does the analog camera signal return to the control room through the wireless bridge and how to connect the equipment? You can, or you can use a hard disk video recorder or a video encoder with a wireless bridge with network function to connect. Can be used as an invisible network cable. You don't have to use a webcam, but you must use a network interface to connect directly to the analog camera. These two signal compression methods are different. ...