Personal summary report of electrician work

By the end of the year, every enterprise will mobilize all employees to hold a grand annual meeting. How is the annual meeting going? Finally, the organizer must have a lot of feelings and need to make a personal work summary report. Next, I will show you five personal summary reports of electrician work, hoping to help you!

Summary report of electrician work 1

20 _ _ _ years of work, I have been strict with myself, conscientious. Mainly summarized from the following aspects:

I ideological and political study and democratic management

Actively participate in various democratic activities, participate in democratic management, take the factory as the home, work hard, and do a good job in producing first-line electricians.

Second, in terms of energy saving and consumption reduction.

In terms of energy saving, I have actively applied what I have learned and made a lot of contributions to the energy saving and consumption reduction of the factory. For example, in the aspect of line transformation, it saves more than 10 million kwh of electricity for the factory every year. At the same time, the old equipment in the factory was reformed electrically, which made some old equipment rejuvenated.

Third, actual production.

For example, examples of finding and eliminating electrical faults of motors in production practice.

Electrical aspects:

1, check whether the lead wire and insulation are in good condition, whether the motor is overheated, check whether its wiring meets the requirements of nameplate, and whether the winding and head-tail electricity are correct.

2. Measure the insulation resistance and DC resistance to see if the insulation is damaged. Whether the winding is open, short and grounded.

3. Power-on inspection When problems are found after the above inspection, you can directly power-on the test, start to apply a lower voltage with the three-phase voltage regulator, and then gradually rise to the rated voltage.

Fourth, production safety.

1, carry out the spirit of the superior documents, improve employees' awareness of safe electricity use and enhance their sense of responsibility.

2. Implement and improve the organization system of safe electricity consumption, and improve the safety management rules and regulations.

3. Strengthen the safety management of power consumption of teams and groups, and lay a solid foundation for safety.

4, a guarantee, users should ensure their own safety and the safety of others.

Verb (abbreviation of verb) training and learning

Over the years, I have actively participated in various kinds of study and training, and strived to learn the basic knowledge and training of electricians, knowledge of power supply system, line devices, lighting devices, grounding devices, transformers, motor maintenance and repair, machine tool electrical control circuits, plc control and other related knowledge systems. Every time I study, I learn some new theories, and apply them to guiding work practice and work, and improve the power supply system and control system of the factory, which has won unanimous praise. It's been fixed. Summarize all kinds of fault phenomena and solutions in time, and record them, guide practice and improve your professional level.

In production practice, we should adhere to the rules and regulations and deal with them in strict accordance with them. Over the years, there has not been a life safety accident caused by electricity in the factory. After many technical transformations, the equipment operation is more scientific and reasonable. In my future work, I will always pay attention to my seriousness. Of course, as an electrician, safety is always the most important. I am responsible for the safety in production as well as the factory. In the new year, I will continue to improve myself and make greater progress in thought, technology and work. I firmly believe that I will do better!

Summary report of electrician work II

How time flies! I've been working as a mechanic in the company for almost nine months. Looking back on the work of these nine months, there are gains and shortcomings. Let me sum up the work of these nine months:

He joined the company years ago and applied for purchasing lighting and maintenance tools for 1 and 4 factories. In February and March, the gates of the 3 rd and 4 th factories were all repaired, the water and electricity installation of the canteen and the replacement of the doors and windows locks of all staff quarters were completed, and all the tasks assigned by the bosses were completed. After April, the high-voltage power distribution room was grounded, the steel bars of the water tower were cut, and the embedded parts of the single crystal furnace, cooling water tower, high-voltage power distribution room and low-voltage power distribution room were cut, and the high-voltage power distribution room and water pump room were electrified and installed. The low-voltage power distribution room will be suspended with the help of single crystal furnace installation and platform production, and the supporting machinery and electricity will be installed. The infrastructure department will do a good job in the company, and Xi 'an engineers will do a good job in furnace debugging after the single crystal furnace installation is completed. Actively check the mechanical equipment during the trial production.

After nearly nine months' work, I deeply realize that my professional skills are so superficial. In order to adapt to this job, I should constantly improve my theoretical foundation and professional quality. I continue to study especially water, gas, electricity, welding, machinery and other professional knowledge. So I often read related books and websites, constantly learn knowledge, master and improve various operational skills. I am very confident and determined to do this job well. I believe that after nine months of training, plus the guidance and requirements of Chairman Yu and the support of vice presidents, I will be able to adapt to the work and make contributions to the development of the company.

After nine months of work, I am basically satisfied with my work. In the future, I will continue to study hard and work hard to make better contributions to the company's suggestions.

Summary report of electrician work 3

Since I joined the property management company on 20 _ _ _ _ _, I have been constantly strengthening my self-cultivation, striving to improve my professional quality, earnestly studying new professional knowledge and safety construction skills, constantly exploring new and effective methods, forging ahead, actively carrying out various work within the scope of Weak Current Group, fully performing my duties, and playing a good exemplary role.

Actively participate in assisting other teams and groups, complete the tasks and work assigned by company leaders and department leaders, do a good job of connecting the preceding with the following, helping to lead and connect, and fully complete the tasks and indicators assigned by superiors, which has played a due role in the company's property management and work development. I will summarize my work in the past year as follows:

First, we should establish a work attitude of loving our jobs and giving play to an exemplary role.

Since I joined the company, I have been engaged in the maintenance, maintenance and repair work within the scope of all responsibilities of the weak current group of the engineering department, focusing on the management and maintenance of elevators.

1. In this more than one year, all the arrival lights, floor display screens and call signs of nine elevators in Hitachi have been installed, enabling the company to open the elevators every time it delivers the building.

2. With the support of the leaders of the engineering department, the company successfully passed the 20-year annual inspection of No.9 elevator and got the annual inspection certificate, which ensured the normal operation of the company.

3. Regularly supervise and inspect the safety and quality of the work of the maintenance unit. I am well aware of the importance of elevator work, especially during operation and maintenance. I have conducted safety education and training for my colleagues in the maintenance unit and the weak current group for three times, especially after the nurses in Shenzhen were injured by the straight ladder, I organized the staff of the maintenance unit and the weak current group to hold a second special discussion.

4, nip in the bud. Supervise and inspect at any time, find problems and solve them in time, and never act rashly. This is the test and responsibility for elevator management.

The company promoted me to be the foreman of the weak current group, and I was duty-bound to shoulder the heavy burden. So in my usual work, I not only ask my team members to be careful in supervision and inspection, but also know that it is necessary to be hard while the iron is hot.

6. I made some strict demands on myself: First, I must get ahead in dirty, tired and dangerous work.

7. Actively support the work arrangements made by the company and departments and the implementation of the new system, actively respond to and reply to the arrangements and instructions of the business department, so that the weak current group prohibits the instructions of the engineering department.

Second, strengthen business learning and improve the maintenance management level of enterprises.

With the continuous development of science and technology, we should constantly learn and improve advanced property management and maintenance management. Especially in elevator special equipment, it is necessary to improve the management of its technical files and maintenance records. Under the guidance of the leaders of the engineering department, I electronically entered and filed the escalator and the technical maintenance files of the escalator in our _ _ _ _ _ Square, and compiled a file with volume 14 according to the Technical Management Specification for Special Equipment required by the state, so as to meet the requirements of Guangzhou Technical and Quality Supervision Bureau for the annual inspection and daily sampling inspection of our elevators.

This job really benefited me a lot! It not only broadens my knowledge, but also improves my technical level to a great extent, which also makes me have an urgent need to learn higher-level theoretical and technical knowledge.

Third, strive to improve personal quality and focus on the next step.

1 First of all, my own work attitude should be more correct, I should have good professionalism, team spirit, be serious and responsible for my work, resolutely obey the leadership arrangement, listen to colleagues' opinions and suggestions with an open mind, unite colleagues, be polite to others and serve customers enthusiastically.

2. Insist on doing everything well and put the interests of the company first. Fire fighting equipment and emergency lighting should be recorded and numbered electronically, so that they can be recorded, numbered, used and know fairly well. Re-number and record the company's telephone resources and surveillance cameras, make a location table, and the electronic archives engineering department,

3. Strengthen the safety training, supervision, inspection and attendance of maintenance units. Supervise their daily work. Let our company's equipment run safely, satisfy customers and use it with confidence.

4. In view of the frequent occurrence of terrorist incidents and fire incidents, employees and maintenance units should be provided with safety training and education every month. Ensure the safe construction and safe operation of equipment within our scope of responsibility.

You should take the initiative to take responsibility, accept criticism of your own shortcomings and deficiencies, and try to correct them. Take immediate action to improve execution. Courageously carry heavy burdens. In practice, I played the due role of an old employee and set up a good image of an electrician for the company.

Summary report of electrician work 4

Since I took up my post, I have constantly strengthened my self-cultivation, strived to improve my ideological and moral level, earnestly deepened the study of various cultures and professional knowledge, constantly explored new knowledge, made pioneering efforts, actively carried out various tasks within my intellectual scope, fully performed the duties of technical personnel, and played an exemplary role. Taking an active part in technical exchanges and scientific and technological innovation activities, Dida has done a good job of passing on, helping and leading, and fully fulfilled various tasks and indicators assigned by superiors, which has played its due role in the company's production development. I will summarize my professional and technical work since I took office as follows:

First, consciously strengthen theoretical study and strive to improve personal quality.

Without a firm and true political direction, there will be no positive guiding ideology. In order to constantly improve my political and ideological quality, I have been paying close attention to national affairs and domestic and international situations in recent years, analyzing the impact of changes in the situation on enterprises, and putting this idea into practical actions in the production process to ensure that I am always consistent with the party and enterprises in thought and action. At the same time, I also bring this idea into my work and study, and constantly pursue my own progress. Some people say that if a person wants to become a talent, he must be a man first, which makes sense. In other words: if a person wants to succeed in his career, he must first learn how to be a man! Especially those who do our highly technical work, we should look at things attentively, concentrate on things and learn with an open mind. There is no room for carelessness and mistakes. First of all, we should have a correct working attitude, good professional quality, be serious and responsible for our work, obey the arrangement of leaders, listen to others' opinions and suggestions with an open mind, unite colleagues, be polite to others and serve warmly.

Second, correct working attitude and play a leading role.

Since I joined the company, I have been engaged in all mechanical and electrical affairs, including safety and quality supervision and inspection during all infrastructure construction. I am well aware of the importance of electromechanical management during construction, especially including most invisible electrical infrastructure and projects. It is necessary to supervise and inspect at any time. When you find a problem, you have to solve it. Otherwise, the future trouble will be endless and will never be eradicated. This is a test and responsibility for our electromechanical management.

As the monitor of the electromechanical class, as an electrician, I am duty-bound to bear the responsibility and burden. So in my usual work, I not only ask my team members to be careful in supervision and inspection, but also know that it is necessary to be hard while the iron is hot. I made some strict demands on myself: first, I should walk in front of the workers when I encounter dirty, tired and dangerous work, and do more and more effectively than the workers; Second, when encountering technical difficulties, we should stand up and try our best to overcome them; I always insist on doing everything well and putting the interests of the company first. Including the production process after completion, sometimes dozens of electrical equipment failures, large and small, are handled against time, which has won valuable production time for the company, laid a solid foundation for the company's development, and provided a strong backing and strong guarantee for the company to create economic and social benefits.

Third, I ask myself to take responsibility; I think since I am a technician, I should be better than ordinary workers in many aspects, such as business level. When the company assigns tasks, ordinary workers should take the initiative to undertake difficult tasks, and can't shirk their responsibilities with workers. They should shoulder the burden bravely like teachers. Usually, I not only ask myself this way, but also do it according to these requirements in practice. Therefore, my performance has been well received by the company's leaders and employees, played my due role as a technician, and established a good image of technicians.

Third, strengthen business study and improve technical level.

It is my motto to be too old to learn. Today, with the continuous development of science and technology, you will fall behind if you don't study for a day. Especially electrical automation, no one can fully grasp everything. It is constantly developing and updating, just like computer software, it is updated every day and has been developing. Maybe you knew it yesterday, but it will be different in two days, and more advanced things will be put in. So I usually read more professional books as long as I have time.

Over the past year, I have collected a large number of new professional books and materials, constantly enriching myself and mastering new knowledge. For example, electrical design and drawing, electronic technology, modern frequency conversion technology, DC application in industry, etc., really benefited me a lot! Not only did I broaden my knowledge, but also greatly improved my technical level, which also made me interested in learning higher-level theoretical and technical knowledge.

Summary report of electrician work 5

I am an ordinary electrician in _ _ _ _ property management company. In the past 20 years, with the care and support of the leaders of the property management company, all the work has been well completed. The complete success of the work is first attributed to leaders at all levels and colleagues around me. I just did what I had to do and did my duty. After years of training and tempering, I fully understand the enterprise spirit of "loyalty and dedication, pioneering and enterprising, learning and innovation, and quality service" advocated by superior leaders and the profound connotation of a series of advanced enterprise cultures. As an electrician of _ _ _ _ _ _ property management company, although he can't directly create economic benefits for the company like other businesses, he is as important as a small screw on the machine. Looking back on my work in the past year, I have mainly done the following work:

First, the assigned task indicators have been successfully completed.

By the end of February, 65438+,we had done every job well, maintained a long-term safety record, and achieved good results in quality service and honest service.

Second, the security situation has remained relatively stable.

Over the past year, according to the requirements of "clear responsibility, strict discipline, strong supervision and clear rewards and punishments" put forward at the beginning of the year, we put safety inspection at the top of all work, strengthened the implementation of safety work, established an all-round and whole-process safety awareness, actively participated in various safety activities organized by the company, paid attention to investigation and study to understand the truth, solved practical problems and paid attention to safety management at work. In this year's tense task, due to effective cooperation, accidents have been eliminated, equipment maintenance and fault handling have been in place, and the rate of power distribution accidents has been reduced. The intact rate of power distribution equipment has reached 100%. Focus on the actual work, check hidden dangers, check the signs of accidents and unsafe factors, and completely eliminate the safety dead angle.

Three, earnestly implement the service commitment and standardized management

Over the past year, we have taken the company's rules and regulations as the criterion and quality service as the purpose, earnestly served the owners and improved the service quality. If the owner has any reaction, respond immediately, actively cooperate, standardize the working procedures, implement the promised service to the owner, and insist that the telephone is open 24 hours a day and on call. Implement the "heart to heart" project. As long as you receive a call for repair, you will go to your home for repair immediately, and the general fault will be repaired immediately. It is not too late to explain the situation of special accidents. Take the initiative to help inconvenient users and do their best to reduce the owner's power outage with honest service, which is well received by the owner. Be proactive in practical work.

Although I have made some achievements in my 20 years' work, I should also face up to the existing problems and shortcomings. In the new year, in order to achieve higher goals, we should improve the industry style and work style and further strengthen work discipline. The awareness of quality service and honest service needs to be further strengthened.

Articles related to electrician's personal summary report:

★ The latest electrician's personal annual work summary in 2020 includes 5 selected articles.

★ Five summaries of personal work of maintenance electricians in 2020.

★ Free reference for electrician's personal work summary model essay

★ Selected model essays on year-end personal work summary of maintenance electricians

★ Personal summary report of electrician service

★ Collection of essays on electrician's year-end personal work summary

★ Selected model essays on personal annual work summary of electricians in 2020

★ electrician's year-end personal summary report