Fire safety drill activity plan

In order to ensure the smooth development of activities, it is usually necessary to make a complete activity plan in advance, which is concrete, thorough and operational in terms of objectives, requirements, methods and progress. So do you know how to write an activity plan? The following is the fire safety drill activity plan I compiled for you, which is for reference only and I hope it will help you.

Fire safety drill activity plan 1 1. contents of fire drills:

1, initial fire fighting and control, fire coordination and command, material transfer drill;

2, fire evacuation guidance and the wounded rescue drills;

3, fire alert and cooperate with the fire squadron drill;

4. On-site fire drill of fire-fighting equipment;

5, fire accident treatment education and performance.

Second, the fire simulation settings

On xx, xx, a nail-riding worker in the packaging department on the second floor of the company caught fire due to improper circuit operation in the packaging department, and the fire spread, igniting the illegally stacked flammable materials in the workshop, illegally blocking the finished products, and three people were trapped in the fire escape and fire. The company started the emergency plan to organize fire fighting and self-rescue, and reported it to 1 19 for fire fighting.

Third, the organization, command and participants of the exercise.

1, commander in chief:

Deputy commander:

2. Exercise the right of technical guidance:

3. Participating organizations and their members:

Fourth, the start and end time of the exercise

At 8: 05 on 20xx 10, the fire emergency plan was started with a broadcast alarm bell or whistle signal, and ended with the summary speech of the general commander Zhang xx. The plan takes 50 minutes.

Preparation for verb (verb's abbreviation) practice

1. Hold a meeting to revise and confirm this exercise plan and clarify their respective responsibilities.

2. Equipment preparation: megaphone 1, assembly point signs of all departments, two large iron drums, a diesel oil, wood, ignition handle, 10 can of dry powder fire extinguisher, a fire hose and a fire hose.

3. According to the reasons, responsibilities and lessons of this simulated fire accident, prepare the employee safety education speech.

4. Prepare your speech.

Practice procedures and key points of intransitive verbs

1, initial fire information notification and fire drill.

2. A fire broke out in the packaging department, which spread and ignited the illegally stacked items in the workshop.

3, commander in chief to the scene to check the fire.

(1) Inform the whole plant of the fire fighting situation;

(2) Notify the company's first-level fire fighting action team to rush to the scene to implement initial fire fighting;

(3) Organize the rush of important materials and open evacuation routes;

4. After the safety supervisor arrives:

(1) Unicom Hydropower Support Group decides the power outage range and completes the hydropower support;

(2) Check and decide to close the relevant windows or doors;

(3) Understand the cause of the fire and master the original witness material evidence of accident investigation and handling.

5, commander in chief according to the situation to make a decision:

(1) Give evacuation instructions to employees;

(2) Decide on 1 19 and issue a fire alarm instruction;

(3) Instruct the workshop to eliminate-prevent-the team members carrying fire-fighting equipment to reinforce the fire scene.

6, security monitor

(1) After receiving the instruction, simulate the alarm to Longgang Fire Squadron;

(2) instruct the security team to strengthen the vigilance of the factory and the factory gate;

Requirements: the communication is smooth and timely, the instructions are clearly conveyed, the personnel arrive at the scene quickly and nervously, and the exercise attitude is serious and realistic.

Seven, the initial fire drill

1. The fire action team rushed to the scene with fire-fighting equipment, and at the same time brought the fire-fighting equipment of the workshop to the scene, connected the hose water gun and made a simulated fire extinguishing. Be careful not to open the water valve, pull out the lead seal and safety pin of the fire extinguisher, and don't open the handwheel, just do a simulation.

2. The fire department has the obligation to eliminate the defense team members; Participate in fire fighting; Rescue the transferred materials.

3. Other workshop-level volunteer firefighters: bring workshop fire-fighting equipment, reinforce fire fighting, and participate in rescue and material transfer.

4. Water and electricity support group: check the power supply of the fire site, cut off the power supply in different areas, start the emergency generator, ensure the water supply on site, and check whether the emergency lighting and evacuation indicator lights are normal.

Requirements: All fully equipped personnel should arrive at the site quickly, and the connection between water gun and hose should be standardized quickly, and more than 2 hoses should be connected. The fire extinguisher shall be transported safely, and shall not be damaged or injured. Materials should be rushed in an orderly and efficient manner, and on-site actions should be realistic, serious and obey orders. After the exercise, the equipment was completely restored to its original position.

Eight, fire evacuation guidance and the wounded rescue drills

1. Du xx, the leader of the evacuation guidance team, directs the team members to be responsible for the evacuation of the safety exits on both sides of the second floor of the packaging department, and guides the personnel to escape from the designated safety exits in an orderly manner according to the prescribed route to avoid crowding and falling. Guide personnel to the designated safe area in the shortest time; And report to the commander in chief in time.

2. Employees are evacuated to the company compound according to the instructions, and the number of people is counted in line.

3. Leave 20 people in the unit where the fire site is located, and 10 people will be evacuated in a low profile to simulate the smoke state of the fire site; 10 people cover their noses and mouths with cloth towels, paper towels and other items, evacuate the fire in a low profile, and then queue up to return to their original units. Requirements: Let all employees observe the evacuation and self-help process.

4. Fire-fighting and rescue drill (two wounded are temporarily set up on site): 5 minutes after the drill starts, the medical rescue team will take the two wounded to a safe place according to the position designated by the evacuation team leader, and carry out emergency rescue treatment (wound hemostasis, burn care, etc. ).

5, drilling points:

(1) Employees should turn off the power supply of the equipment in this position before evacuating;

(2) Close the nearby windows before the employees near the windows evacuate;

(3) Ensure that the fire door is closed;

(4) The commander-in-chief organizes some units on the site to queue up to count the evacuated employees, so as to ensure that all personnel are here, and can find out who is trapped in the fire and waiting for rescue.

Nine, fire alarm

1, fire scene alert drill

After receiving the instructions, the squad leader of the security team immediately strengthened the security alert of the fire and the factory to prevent people from looting and returning. At the same time, send people to patrol along the factory wall, strictly control the personnel and vehicles entering and leaving the factory gate, and strengthen the police force on key targets and parts in the factory. After the fire broke out, people and vehicles simulating illegal activities began to move to test whether the security guards could find and capture them.

2. Re-simulate 1 19 alarm.

After the evacuation and assembly of employees, the commander-in-chief will give the alarm instruction of the fire fighting action team leader to 1 19 again, and then the security team will simulate the alarm content to the employees with megaphone, so that the employees can master the alarm method and key points.

Alarm points: unit, place, location, emergency rescue requirements, time, floor, combustible, fire and control; Whether there are inflammable and explosive dangerous goods, evacuation, casualties and being trapped, where someone meets a fire truck, contact number and report.

Different people can be arranged to repeat the alarm content for 2-3 times to impress the participants.

X. On-site fire drill of fire-fighting equipment: after the personnel are assembled, the actual fire drill is announced.

1. Set up the fire site, and complete the preparatory work while each department counts the number of people.

2. First, explain the purpose, decomposition and matters needing attention of dry powder fire extinguisher.

3. Fire fighting action: After hearing the commander's fire fighting order, start the fire fighting exercise.

(1) Voluntary firemen take turns to put out the fire with dry powder extinguishers.

⑵ Fire hydrant extinguishing: voluntary fire extinguishing-prevention-players use outdoor fire hydrants and use water guns to extinguish the fire.

Requirements:

(1) Do the simulation action first, then do the actual action, and the action is correct and decisive.

(2) Let the ordinary staff come up to feel the operation of the fire extinguisher and explain it.

(3) Grasp the wind direction and control the smoke, fog and water flow at the scene.

(4) Use the fire extinguisher that is about to expire, and use it repeatedly after it is turned on, so as to exhaust the drugs to save equipment. ten

First, the fire accident education and performance

1. fire accident education: the commander-in-chief will preach to all employees.

(1) Causes of fire, property losses and casualties.

(2) The lessons of this fire and the consequences caused by violation of regulations.

(3) The reason why the fire was controlled and put out is to praise the efforts and cooperation of all action groups.

(4) Announce the establishment of an accident investigation team, further find out the reasons, implement the responsibilities, handle related responsibilities, and further do a good job in fire control.

Requirements:

The above speeches are all simulations, aiming to let employees know the hazards of fire from drills and fire accidents, understand the handling procedures of fire accidents, increase their daily consciousness of obeying rules and disciplines, further improve their understanding of the importance of fire control work, learn lessons from them and get education.

2. Summary: Deputy General Manager Zhang commented on the whole process, reaction speed, skills of each link and action group of this drill; Summarize the fire fighting organization, command and coordination with the volunteer team, affirm the advantages, point out the shortcomings, further improve the level of exercises, make daily training and exercises close to actual combat, and improve the actual combat ability to deal with possible fires. At the same time, after the exercise, arrange the maintenance, recovery and replacement of equipment and materials.

3. Hold a meeting after the exercise to further analyze and summarize the fire emergency rescue plan and the problems existing in the exercise, and make necessary adjustments and modifications to the plan.

Fire safety exercise activity plan 2 i. Exercise purpose

Through fire safety emergency drills, the teachers and students of the whole school can master the correct emergency fire fighting methods, be familiar with the procedures and routes of emergency evacuation in our school, ensure that the emergency work of our school can be carried out quickly, efficiently and orderly when the fire comes, and protect the life safety of the teachers and students of the whole school to the maximum extent, especially reduce unnecessary injuries. At the same time, through drills, students are trained to obey orders, unite and help each other, and improve their emergency response ability and self-help and mutual rescue ability.

Second, the content of the exercise arrangement

(1) Emergency evacuation drill

(2) Fire safety knowledge training

(2) Object:

All primary school teachers and students

(3) Time: March 20xx 15.

Third, preparation for practice.

1, release the implementation plan.

2. The class teacher should educate the students on fire safety knowledge and train the students on emergency evacuation procedures and routes.

3. Before the drill, the class teacher should mobilize students to be familiar with the correct methods of emergency evacuation, explain the procedures, contents, time and discipline requirements of the drill, as well as the evacuation routes and arrival areas of each class, and emphasize that although the drill is a preventive and simulated drill, it should be taken seriously to ensure that the drill can be carried out safely and smoothly.

4. Before the drill, carefully check the places where the evacuation route must pass and the "safe areas" it reaches, rectify the existing problems in time, eliminate obstacles and hidden dangers, and ensure the smooth and safe route.

Fourth, the drill requirements

1, don't panic, follow the command and obey the arrangement.

2, keep quiet, agile, standardized, it is forbidden to push and pull, collision, crowded.

3, according to the provisions of line evacuation, shall not be crossed.

4. Every classroom and class should be well organized and taken seriously to avoid unsafe accidents.