How to write the template of engineering construction contract

Contract is an objective requirement to adapt to the private ownership of commodity economy and a legal form of commodity exchange. How to write the project construction contract? I brought you the construction contract. For more construction contract samples, please click "Construction Contract".

Engineering construction contract 1

Employer (hereinafter referred to as Party A):

The Employer (hereinafter referred to as Party B):

After consultation, Party A and Party B sign the following agreement on Party A entrusting Party B to build _ _ _ _ _ greening project:

I. Overview of the Project

1. Project name: _ _ _ _ Greening Project.

2. Project location: _ _ _ _ _ _.

3. Construction scope: green area of _ _ _ square meters (see green design drawing for details). The above-mentioned projects are carried out according to the requirements of drawings jointly reviewed by both parties and the items, specifications, remarks, quantities and requirements listed in the attached budget summary table.

Second, the construction period

1. Commencement date: The project duration is * * * days to * * days.

2. During the construction period, the construction period may be postponed due to water stoppage, power failure, heavy rain, rainstorm days, etc. or confirmed by Party A in writing.

3. If Party A fails to hand over the construction site in time, the construction period will be postponed.

Third, the project contract price

Through negotiation, the total contract price of this contract is RMB Yuan only. During the construction, if Party A needs to increase the project due to the change, the settlement shall be made according to the actual situation.

Fourth, the construction mode.

1. Party B shall contract and package the materials for the greening project; Package quality, package acceptance, package safety, package construction period and package civilized construction.

2. During the construction period, Party A shall be responsible for Party B's construction water and electricity consumption.

V. Payment method of project funds

1. Within 3 days after the signing of this contract, Party A shall pay Party B a deposit of 30% of the contract price, that is, RMB 10,000 Yuan only. Party B will arrange personnel to enter the site for construction the next day after receiving the payment.

2. After the project is completed, Party A shall pay Party B 60% of the contract price of the project within 3 days, that is, RMB 10,000 Yuan only.

3. Pay Party B 65,438+00% of the contract price of this project within one month after the completion acceptance, that is, RMB ten thousand Yuan only.

4. The taxes and fees required for the project have been included in the project cost and paid by Party B. ..

Six, engineering quality requirements

1. Party B must carry out the construction in strict accordance with the contents and requirements of the design and construction drawings approved by Party A and the relevant landscaping construction specifications.

2. In the process of construction, Party B must obey the supervision and management of Party A. If it is found that Party B does not meet the requirements of the construction drawings and violates the operation specifications, Party A has the right to propose and require rework and modification, and all economic losses caused by its shutdown and rework shall be borne by Party B. ..

Seven, project completion acceptance settlement

Party B shall notify Party A within three days after completion, and Party A shall organize acceptance within five days after receiving the notice, and give qualified recognition or put forward rectification opinions according to the design and construction drawings and contracts within five days after acceptance. After the acceptance, Party A shall settle the account according to the contract and the list of additional project visas, and complete the settlement within 30 working days.

Eight. Liability for delaying breach of contract

Party B must ensure the quality and quantity within the construction period and complete the project on schedule. If the project is delayed, 200 yuan will be fined for each day of delay; If the project is delayed due to Party A's responsibility or force majeure, Party B shall make a written request, and Party A shall confirm in writing that the construction period can be extended within three days. If Party A fails to make payment according to the contract, and the payment is overdue for three days, Party B has the right to stop work or close the completed project, and Party A shall be responsible for the construction delay and economic losses caused thereby.

Nine. defects liability period

1. Party B shall complete the construction tasks with good quality and quantity, on schedule and safely according to the construction drawings. Three months after the completion acceptance is the maintenance period of greening planting, and Party B shall be responsible for the quality problems during the maintenance period.

2. During the construction period, Party B must do a good job in safety production prevention, implement various safety measures, ensure construction safety, assume the responsibility for safety construction, and educate construction personnel to abide by the law.

3. Party A shall be responsible for providing Party B with the construction site (which shall meet the requirements of three links and one leveling), the location of water and electricity within the construction scope, the location of survey baseline and leveling points, and the underground pipe network map in the construction site three days before the commencement of construction. If Party A fails to provide the construction site in time, Party B has the right to postpone the construction period.

4. Party A is responsible for coordinating the relationship between construction sites and ensuring the construction progress of Party B. ..

5. After the project is completed, Party B is responsible for cleaning up the garbage within the construction scope so as to clean up the site after work.

X. entry into force and termination of the contract

This contract shall come into effect after being signed and sealed by the representatives of both parties. Upon the expiration of the project warranty period, this contract shall be terminated after Party A settles the payment.

XI。 This contract is made in duplicate, one for each party, with the same legal effect.

Matters not covered in the performance of the contract shall be settled through negotiation as far as possible. Relevant agreements can be countersigned, and the countersigned agreement has the same legal effect as this contract.

Representative of Party A: _ _ _ _ _ _ _

Date of signature: _ _ _ _ _ _ _

Representative of Party B: _ _ _ _ _ _ _

Date of signature: _ _ _ _ _ _ _

Engineering construction contract 2

Employer: (hereinafter referred to as "Party A")

Contractor: (hereinafter referred to as "Party B")

According to the Contract Law of People's Republic of China (PRC) and relevant laws and regulations, in order to ensure the smooth progress of the project, Party A and Party B enter into this contract (including its annexes and all supplementary contracts) through friendly negotiation on the basis of equality, voluntariness and unanimity for common compliance.

Article 1 General situation of the project

1. 1 project name:.

1.2 Project location:.

1.3 project contents and practices (see: project budget quotation sheet and construction drawing for details).

1.4 project contracting method: both parties agree to adopt the following _ _ _ contracting method.

(1) Party B contracts labor services and materials.

(2) Party B contracts some materials and Party A provides some materials (see details of decoration materials provided by Party A and decoration materials provided by Party B);

(3) Party B's contracting and Party A's contracting (see the list of decoration materials provided by Party A for details).

1.5 The construction period is _ _ _ calendar days, and the commencement date is _ _ _ _ _ _ _ _ _ _ _.

1.6 contract price: please refer to the quotation sheet of project budget for the project cost of this contract. If there is any increase or decrease in the construction project, both parties will increase or decrease the cost after negotiation and signature confirmation.

Article 2 Construction drawings

Both parties agree that the construction drawings shall be provided in the following ways:

(1) Party A shall design and provide the construction drawings in duplicate, one for Party A and one for Party B (see the design drawings of the decoration project for details);

(2) Party A entrusts Party B with the design and construction drawings in duplicate, one for Party A and one for Party B (see: Design Drawings for Decoration Engineering), and the design fee is _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Article 3 Obligations of Party A

3. 1 _ _ _ days before commencement, to create conditions for Party B to enter the site for construction. Including: on the principle of not affecting construction, demolishing or stacking indoor furniture and furnishings, and covering indoor furniture and furnishings that are not easy to move; If Party A fails to take necessary protective measures, resulting in the loss of furniture and furnishings, Party A shall be responsible for this.

3.2 Be responsible for the application, approval and other procedures involved in the construction, and pay all expenses of the property management office and approval.

3.3 Responsible for providing water and electricity needed for construction;

3.4 Responsible for coordinating the relationship between Party B and its neighbors and property management office;

3.5 The indoor load-bearing structure shall not be demolished. If it is really necessary to dismantle the non-load-bearing structure or equipment pipeline of the original building, go through the corresponding examination and approval procedures with the relevant departments;

3.6 During the construction period, Party A still needs to use part of the site, and is responsible for public security and fire control at the construction site;

3.7 Participate in the inspection and supervision of project quality and construction progress, handle matters such as acceptance and change registration procedures, and be responsible for the material entry and completion acceptance.

3.8 Provide self-purchased materials for construction on time, with good quality and quantity.

Article 4 Obligations of Party B

4. 1 is appointed as the site supervisor of Party B to be responsible for the performance of this contract; Organize the construction according to the requirements, ensure the quality and quantity, complete the construction tasks on schedule, and handle and solve all matters that Party B is responsible for.

4.2 Strictly implement the safe and civilized construction operation specifications, fire safety regulations, construction specifications and quality standards during construction, and complete the project with good quality on schedule;

4.3 Strictly implement the relevant regulations of construction site management, carry out safe and civilized construction in strict accordance with drawings or instructions, and make various quality inspections and construction records;

4.4 Protect indoor furniture and furnishings in their original places, and ensure smooth indoor plumbing;

4.5 Ensure the cleanliness of the construction site and be responsible for the cleaning of the construction site after the project is completed.

4.6 Before the completion of the project is handed over to Party A, be responsible for protecting all facilities and finished products at the site.

Article 5 Engineering changes

If it is necessary to change the project and construction method, both parties shall reach an agreement through consultation, and both parties shall sign for confirmation, and at the same time adjust the related project cost and construction period (see the list of increase or decrease of decoration projects for details).

Article 6 Provision of materials

6. 1 The materials and equipment provided by Party A (see the list of decoration materials provided by Party A for details) shall meet the requirements of facilities, and Party A shall be responsible for the engineering losses caused by quality problems or specification differences. Party A shall notify Party B before the materials arrive at the construction site, and both parties shall accept and handle the handover procedures; After acceptance, Party B shall be responsible for keeping it.

6.2 For the materials and equipment provided by Party B (see the list of decoration materials provided by Party B for details), Party B shall notify Party A before the materials arrive at the construction site and accept the inspection of Party A.. If the quality does not meet the requirements or the specifications are different, it should be banned; If it has been used, Party B shall be responsible for the losses caused to the project.

Article 7 Time limit for a project is delayed

7. 1 If the completion date is delayed due to the following reasons, the construction period will be postponed accordingly after being confirmed by Party A;

(1) engineering quantity change and design change;

(2) Force majeure;

(3) Other circumstances in which Party A agrees to postpone the construction period.

7.2 If the time limit for a project is affected by Party A's failure to complete the work it should be responsible for as agreed, the time limit for a project will be postponed; If the unqualified materials and equipment provided by Party A affect the project quality, the cost of rework shall be borne by Party A, and the construction period shall be postponed.

7.3 If Party A fails to pay the project payment on schedule, the contract period shall be postponed accordingly.

7.4 If the construction period is affected by Party B's failure to start construction on schedule or stop work halfway for no reason, the construction period will not be postponed; If there is any problem in the quality of the project due to Party B, the cost of rework shall be borne by Party B, and the construction period shall not be postponed.

Article 8 Payment method of project funds

8. 1 After the contract comes into effect, Party A shall directly pay the project payment to Party B according to the following terms:

First time: When signing this contract, Party A shall pay% of the total amount (including the total amount of project funds and the amount of additional projects) determined in Party B's quotation, that is, RMB.

The second time: carpentry enters the site, and Party A pays% of the total amount (including total quantities and additional quantities) determined in Party B's quotation, namely RMB.

For the third time, Party A pays Party B% of the total amount (including the total amount of the project and the amount of additional projects) determined in the quotation, that is, RMB.

Fourth time: After the project is completed and passed the completion acceptance, Party A shall pay Party B 5% of the total amount (including the total amount of the project and the amount of additional projects), namely RMB.

8.2 After the acceptance of the project, Party B shall propose the project settlement to Party A and send relevant materials to Party A. If Party A has no objection within days after receiving the information, it shall be deemed as agreement. Both parties fill in the project settlement form and sign it, and Party A will settle the project balance with Party B when signing it.

8.3 After all the project funds are settled, Party B shall issue a formal unified receipt to Party A. The payment of project funds by Party A shall be subject to the receipt issued by Party B's financial department, and shall be stamped with the special financial seal.

8.4 After the acceptance of this project, the warranty period is 65438+February from the date of signature by both parties.

Article 9 The responsibilities of both parties and the treatment of delay in construction period

9. 1 If the construction period is delayed due to Party A's reasons, Party A shall be responsible for the losses, and the construction period shall be postponed:

(1) cannot provide water and electricity;

(2) Working hours of more than 8 hours per day (including overtime) cannot be guaranteed;

(3) Failing to provide self-purchased materials and equipment on time;

(4) Failing to pay the project payment on schedule, which affects the normal construction;

(5) Changing the design and adding construction projects due to Party A's reasons;

(6) Other circumstances that agree to postpone the construction period.

(seven) overdue acceptance or unreasonable delay in acceptance;

(8) Other circumstances that delay the construction period due to Party A's responsibility.

9.2 If the construction period is delayed due to the following reasons, the construction period will not be postponed:

(1) If the construction period is affected by Party B's failure to start work on schedule or stop work for no reason midway, the construction period will not be postponed;

(2) The cost of rework caused by engineering quality problems shall be borne by Party B, and the construction period shall not be postponed.

(3) Party B shall be responsible for the personal injury caused by violation of safety operation norms during construction;

(4) If Party B's construction causes damage to Party A's articles, Party B shall repair or compensate them;

(5) The losses caused by Party B's violation of property management regulations shall be borne by Party B. ..

(6) If the quality of the project fails to meet the quality standards agreed by both parties due to Party B, Party B shall be responsible for repairing it, and the construction period will not be postponed.

9.3 If either party fails to perform the contract or the performance does not conform to the provisions of the contract, the responsible party shall bear the responsibility and compensate the other party for its economic losses.

9.4 Party A shall be responsible for the losses caused by Party A's early use or unauthorized use of finished engineering products without going through the acceptance formalities.

9.5 If the performance of the contract cannot be continued due to one party's reasons, that party shall promptly notify the other party and handle the contract termination procedures, and the responsible party shall compensate the other party for the corresponding economic losses.

9.6 If Party A fails to pay the project payment on schedule, it shall pay RMB as liquidated damages to the other party for each day overdue.

9.5 If the construction period is delayed due to Party B's reasons, Party B shall pay liquidated damages of _ _ _ _ _ _ yuan to the other party for each day of delay.

Article 10 Design, Construction and Acceptance Agreement

10. 1 The construction drawing completed by Party B's designer must be reviewed with Party A within the agreed time, and Party B can start work only after Party A confirms and signs it.

10.2 party b must carry out construction (installation) in strict accordance with the drawings approved by party a. ..

10.3 In the course of construction, if Party A proposes to change drawings, stop construction or add or subtract projects, it shall notify Party B in writing, explaining the reasons for stopping construction or adding or subtracting projects, project location, time and materials, etc. According to the change requirements, Party B shall submit to Party A the list of measures taken for the change as soon as possible, as well as the increase or decrease of expenses, delay of construction period, material consumption and cost loss caused by shutdown and other reasons, and report to Party A. Party A shall sign a reply or negotiate settlement within two days after receiving the report.

10.4 before the acceptance of concealed works, Party B shall notify Party A to go to the site for acceptance, and the acceptance period shall be two days. If Party A fails to make the acceptance on time, Party B may truthfully fill in the hidden record after the self-inspection, and Party A shall acknowledge the self-inspection result of Party B. ..

10.5 After the completion of the project, Party B shall notify Party A for acceptance. Party A shall accept the goods within days after receiving the notice and go through the acceptance and handover procedures. If Party A fails to accept the goods within the above-mentioned specified time, it shall promptly notify Party B in writing and set another acceptance date, otherwise it shall be deemed that Party A has passed the acceptance. If another acceptance date is set, Party A shall acknowledge the completion date and bear Party B's storage expenses and related expenses.

10.6 If both parties fail to go through the acceptance formalities, Party A shall not move in. If Party A moves in without authorization, it will be deemed as qualified, and the losses caused thereby shall be borne by Party A. ..

Article 11 The project budget quotation sheet, construction drawing and other documents signed and confirmed by both parties through consultation, as annexes to this contract, have the same legal effect as this contract.

Article 12 Ways of settlement of contract disputes

Disputes arising from the performance of this contract shall be settled by both parties through consultation; It can also be mediated by Dongguan Decoration Association; If negotiation or mediation fails, a lawsuit may be brought to the people's court according to law.

Article 13 Supplementary Provisions

13. 1 If there are any matters not covered in this contract, both parties shall settle them through consultation on the principle of friendship and mutual benefit. If a supplementary agreement is signed after negotiation, the supplementary agreement has the same legal effect as this contract.

13.2 after the signing of this contract, the project shall not be subcontracted.

13.3 this contract is made in duplicate, with each party holding one copy. This contract shall come into effect after being signed by both parties and stamped with the official seal or special seal for the contract, and shall be automatically terminated upon completion of performance.

13.4 the annexes to this contract are an integral part of this contract and have the same legal effect as this contract.

Party A: _ _ _ _ _ _ _ (signature) Party B: Dongguan Decoration Engineering Co., Ltd. (seal)

Legal Agent: Legal Agent: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Authorized Agent: _ _ _ _ _ _ _ _ Authorized Agent: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Address: Address: _ _ Town _ _ Road

Tel: Tel: _ _ _ _

Engineering construction contract 3

Customer (Party A):

Organizer (Party B):

Engineering project:

Through friendly negotiation between Party A and Party B, Party A decides to entrust Party B to decorate the living room. In order to ensure the smooth progress of the project, in accordance with relevant national laws and regulations, this contract (including its annexes and all supplementary contracts) is hereby signed for * * * to abide by.

Article 1: Project Overview

1. Project address: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

2. Room specifications:

Total: the construction area is _ _ _ _ _ _ _ _ square meters.

3. Construction content: See Annex (1) List of Home Decoration Construction Contents and Construction Drawings for details.

4. Project Commencement Date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

5 Project completion date: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Total days of the project: _ _ _ _ _ _

Article 2: Project Price

The project price (in words) is _ _ _ _ _ _ _ _ Yuan (in words).

Article 3: Quality Requirements

1. The varieties, specifications and names of the main materials used in the project shall be approved by both parties. See Annex (III) List of Final Accounts of Home Decoration Engineering Materials for details.

2. Regarding the acceptance standard of this project, both parties agree to refer to Zhejiang local standard "Acceptance Standard for Residential Decoration".

3. During the construction, if Party A has special construction projects or special quality requirements, both parties shall confirm and sign a supplementary contract for the increased costs.

Article 4: Method of Payment

1. After the contract is signed, Party A shall pay 100% of the project cost and 50% of the project cost; When the progress of the construction period is over half (year, month and day), Party A will pay 40% of the project payment for the second time. The remaining 10% shall be paid to Party A after the project is completed and accepted. (Note: Construction costs include labor costs)

Party A pays off the project price, and Party B issues a unified invoice, handles the handover to Party A, and issues a decoration project warranty card.

Party A's failure to pay on time is a breach of contract, and Party B has the right to stop the construction. If the project price is not settled after acceptance, it shall not be delivered for use.

2. If there is any increase or decrease in the project or need to be changed during the project construction, both parties shall sign a supplementary contract, and Party B shall be responsible for issuing the construction change form and notifying the person in charge of the construction site. Increase or decrease the project price and cool down on site.

3. If Party A fails to pay the project price in advance within the time limit stipulated in this contract, Party A shall pay 1% of the unpaid project price to Party B for each overdue day.

4. If Party A mortgages the living room decoration to the bank, it shall submit the mortgage certificate and relevant documents (copies) to Party B. ..

Article 5: Liability for breach of contract

After the contract comes into effect, during the performance of the contract, the party that terminates the contract without authorization shall pay the other party 5% of the total contract amount as liquidated damages. If the actual loss caused to the other party by the unauthorized termination of the contract exceeds the liquidated damages, it shall be compensated.

Article 6: Modification and Termination of the Contract

1. After this contract comes into effect after being signed by both parties, both parties must strictly abide by it. If either party needs to change the contents of the contract, it shall sign a supplementary agreement after both parties reach an agreement through consultation. If it is necessary to terminate the contract, the party who proposes to terminate the contract shall do so in writing, and pay a penalty of 65,438+00% of the total contract price, and go through the termination procedures.

2. In the process of construction, if either party proposes to terminate the contract, it shall submit it to the other party in written form. After both parties agree to go through liquidation procedures and conclude an agreement to terminate the contract, the contract shall be deemed to be terminated.

Article 7: Entry into force of the contract

1. This contract shall be sealed by both parties and come into force after being signed.

2. This contract is made in duplicate, one for each party and the witness department.

Party A (Owner): (Signature) Party B: (Signature)

Tel: Tel:

Date of signing:

Engineering construction contract 4

Party A:

Party B:

Party A's house under construction has two floors, one floor is about square meters, and the other floor is about square meters, which is contracted by Party B. Based on the principles of equality, mutual benefit, honesty and credibility, both parties agree to sign this agreement through consultation, so as to abide by it jointly:

First, the contracting method.

Take the way of contracting without contracted materials.

Party A shall provide materials needed for the building, including: red bricks, river sand, stones, lime, cement, steel, water pipes, sewer pipes, nails, wires, water and electricity, etc.

Party B shall provide labor services, construction technology, construction tools and all production and living appliances.

Second, the construction project

Party B shall carry out the construction according to the design drawings or the requirements put forward by Party A. The buildings of Party A's main building project include walls, beams, columns, stairs, floors, formwork installation, formwork removal, steel bars, cast-in-place concrete and concrete cushion for the ground and front steps; Paint the interior decoration, paste the front exterior wall tiles, brush cement mortar along the rear exterior wall, paste the bathroom floor and wall tiles, and install porcelain pots, sewer pipes and downspouts; The top layer shall be polished with cement slurry, and at the same time, it shall be well treated for seepage prevention and impermeability.

Third, the contract price

RMB in words per square meter: RMB (), and the construction area is calculated according to each external wall. The construction scope includes all the walls that need cement mortar plastering.

Four. mode of payment

After the contract is signed, the tools and personnel are in place, 30% in advance, 50% when the first floor is bricked and compacted, 8000 yuan when the second floor and roof are completed, and 90% when the project is completed. 65,438+00% shall be reserved as quality deposit. If there is no quality problem within one year after completion, the final payment shall be paid.

Verb (abbreviation for verb) The responsibility of both parties.

Party A is responsible for the timely supply of water and electricity, the timely entry of raw materials and the daily lunch.

Party B must ensure the quality and progress of the project, carry out the construction according to the design drawings and Party A's requirements, save materials, take good care of them and not lose them.

Six, quality requirements

Party B shall organize the construction in accordance with the national housing quality standards and requirements. If it is unqualified, Party B shall be responsible for rework, and the rework fee shall be borne by Party B or deducted from Party B's project payment by Party A..

Seven, pay attention to safety

Labor protection measures, construction protection measures in place, safe construction. If Party B's construction personnel suffer work-related injuries due to their own reasons or Party B's inadequate safety protection measures, or others are injured due to construction, Party B shall be responsible for everything, and Party A shall not bear any responsibilities and expenses. Civilized construction, pay attention to professional ethics, pay attention to cleanliness.

Eight, the time limit for a project requirements

The main project duration is 75 (calendar days). Since the date of signing this contract, Party B must complete the main project ahead of schedule, which will be postponed due to the weather. Party B shall not delay the completion time of Party A's building for various reasons. If Party B needs materials, Party B shall submit the plan to Party A in advance for timely preparation.

Nine, the later maintenance

The maintenance expenses arising from Party B's quality problems shall be borne by Party B, and the relevant compensation and responsibilities arising therefrom shall be borne by Party B..

X. others

Other matters not covered shall be settled by both parties through consultation, and shall be implemented in strict accordance with national and local standards.

This contract is made in duplicate, one for each party, and shall come into effect as of the date of signature.

Signature (seal) of Party A:

_ _ _ _ _ _ _ _ _ _ _ _ _

Signature (seal) of Party B:

_ _ _ _ _ _ _ _ _ _ _ _ _

Engineering construction contract 5

Party A:

Party B:

According to the principles stipulated in the Economic Contract Law of the People's Republic of China and the Regulations on Construction Project Contracts, combined with the actual situation of housing construction, Party A and Party B reached the following agreement through consultation.

I. Overview of the Project:

1. Party A will build a house with a top floor in _ _ _ _. After contact, consultation and negotiation with Party B, it is decided to contract out its house construction project (from the beginning of the main structure to the completion of painting) to Party B for construction, and the project will be completed from _ _ _ _ _ _ _. Housing construction adopts the form of cost contract system; Party B shall carry out the construction according to the warranty period of Party A's drawings.

2. Take the form of lump sum expenses. Party B is responsible for facilities (such as scaffolding and springboard). Party A shall be responsible for the supply of materials required by the construction; The project starts from the date of signing the agreement and lasts for days; The total construction area of the house is square meters, and the construction cost is RMB yuan per square meter.

3. Payment method: After the main structure project is completed, Party A shall pay 50% of the project cost to Party B.. That is (in words): _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ..

Second, the quality requirements:

1. The acceptance criteria of this project shall be implemented by Party A in accordance with the following provisions.

2. During the construction, Party B shall carry out the construction according to Party A's requirements. During the construction of the main structure, the wall should be vertical and flat as a whole, and all doors, windows and doors should be in line with the wall; When painting, the wall thickness should be uniform, without cracks, the inner wall surface should reach the overall level, smooth and without cracks, and the painting at the contact between doors and windows and the wall surface can not have cracks. The ceiling surface should be uniform in thickness, without cracks, all painted colors should be uniform, and the door wall and bathroom tiles should be pasted flat and complete to achieve flatness; The angle of yin and yang is in a line with the wall, vertical or parallel to the wall; Rainwater drainage will be carried out around the house, and Party A will conduct completion acceptance after the project is completed.

Third, security issues:

Party B shall be fully responsible for the safety of the project construction site. In case of any safety accident, Party B shall be fully responsible and bear all the responsibilities, and Party A shall not bear any responsibilities or legal responsibilities.

Need to explain:

5. This contract is made in duplicate, with each party holding one copy. This contract shall come into effect as of the date of signing on.

Party A (signature and seal)

Party B (signature and seal)

Party A (signature and seal)

References of both parties (signature and seal)

Party B (signature and seal)

Month, day, 20 years

How to write a template of engineering construction contract;

★ Standard Edition of Engineering Contract Template

★ Model project contract agreement

★ Demonstration contract of engineering construction contract

★ Selection template of engineering construction agreement

★ 3 copies of model project contract.

★ Project construction contract sample

★ Engineering construction contract 202 1 5 samples.

★ Reference template for construction contract agreement template

★ 4 demonstration project construction contracts