Buildings built in small rural areas are neglected. What should I do? If the property is not repaired properly, there will be a charge. I have floor heating in my house, and I added a radiator myself,

Buildings built in small rural areas are neglected. What should I do? If the property is not repaired properly, there will be a charge. I have floor heating in my house, and I added a radiator myself, but ... One,

There is air in the pipe, which hinders it

Generally speaking,

there will be

, the role is to exhaust, new use and installation.

Exhaust must be carried out. The method is: for example, your home is no.5 road.

, turn off the fourth road first (one road can only be operated), and open the backwater.

, one of the water all the way, until only the water is not ventilated, and so on.

Second, the water temperature is low. If the indoor temperature is to reach 18~22 degrees Celsius,

The water supply temperature must be above 45℃

It needs a water temperature of 60 degrees, so if

Then it won't be hot

Not even so hot), you can find a professional (or yourself)

If the road temperature measurement is not up to standard, you can contact your respective residential properties.

Third, the system circulation is poor, and the heating company supplies it back.

The difference is small, and the speed of water flow decreases, resulting in geothermal heat not being hot. This also needs to be solved by the property, otherwise it will really be crushed.

This is a bit of an idiot.

Fourth, there is too much conflict between neighbors, maybe your neighbors or

Install on the pipeline

As a result, the water flow is too biased towards his home, and people nearby will naturally be implicated. This can't be solved Why don't we also press a pump?

Five,

Blockage,

There is one on the bar above.

, plays the role of filtering impurities, because there are too many impurities in the water,

Generally, the blockage is still serious, resulting in a decrease in water flow, no flow in geothermal pipelines, and geothermal energy is naturally not hot.

6. Dirt is generated on the inner wall of geothermal pipeline, and the deposition thickness is 1- 1.5 mm through scientific calculation.

Sticky mud hinders heat dissipation, and correspondingly reduces the indoor temperature by 3-6 degrees, especially in areas with poor water quality. but

about

can

In the heat exchange process,

From 0 mm to 0.3 mm,

The rate will be reduced to 79%, that is, when the scale thickness reaches 0.3mm, 2 1% heat will not be converted normally. Causing geothermal heat not to be hot. Let's solve this problem by cleaning.

Seven, the cement layer on the pipeline is too thick, and the temperature is difficult to release into the space. There seems to be no way to solve this problem. Who told us not to find a regular geothermal company to install it?