Responsibility book for construction site safety

Construction Site Safety Responsibility Letter (5 copies for general use)

In daily life and work, more and more occasions need to use the responsibility book. The responsibility book is a kind of document, which stipulates the responsibilities and defines the tasks to be undertaken. So what kind of responsibility is effective? The following is the responsibility book (5 summaries) of construction site safety that I have carefully compiled, which is for reference only and I hope it will help you.

Responsibility letter for construction site safety 1 In order to implement the safety production policy of "safety first, prevention first", ensure the implementation of various construction safety measures, ensure the smooth progress of the project construction, and ensure the personal health and safety of field operators, both parties signed this responsibility letter on matters related to the safety construction of this project through consultation in accordance with the Safety Production Law and other relevant laws and regulations, combined with the actual situation of this project.

First, the project safety production management objectives

1, seriously implement the national laws, regulations and rules and regulations on safety in production. Adhere to the policy of "safety first, prevention first", strengthen safety management and ensure safe production.

2, put an end to fatal accidents, put an end to major mechanical equipment, poisoning, traffic and fire accidents.

3, put an end to fatal accidents, avoid serious injuries, the serious injury rate is less than 0.3‰, reduce minor injuries, and the annual industrial injury frequency is less than 10‰.

4. Seriously study and implement the JGJ59-99 standard of the Ministry of Construction to ensure that this project can reach the qualified standardized site.

Two. Safety responsibilities of Party A (captain or team leader):

1, strictly abide by the safety laws and regulations and the relevant responsibility system for production safety, arrange the work reasonably according to the technical, physical and ideological conditions of the team members, and do a good job in safety technical disclosure. When a team assigns two or more jobs, a temporary person in charge must be appointed to take charge of the safety work and be responsible for the safety team.

2, organize team members to learn safety technology operating rules, carry out safety activities, adhere to the safety speech before class, explain the matters needing attention in detail, and fill in the team activity record every day.

3. Conduct on-site safety education for the newly transferred workers, be familiar with the environment and posts, and designate special personnel to be responsible for personal safety.

4, often check the safety production site, handle or report in time when problems are found.

5, urge the workers on duty to use personal protective equipment correctly.

6, education team members stick to their posts, not illegal command, not illegal operation, not in violation of labor discipline, at the same time to do a good job of self-inspection, mutual inspection, handover inspection.

7. Obey the unified coordination and management of the project department personnel, be responsible for the civilized construction in the construction area, and ensure that the regional civilization and environmental sanitation meet the standards.

8, inductrial injury accident to rescue immediately, to record in detail and report in time, organize the class personnel to carefully analyze the reasons, put forward preventive measures, major casualty accidents to protect the scene and report in time.

Three. Safety responsibilities of Party B (team member):

1, the worker is the first person responsible for production safety in this position, and is responsible for the safety of himself, the environment and others in his work.

2, keep in mind the safety in production, everyone's responsibility, prevention first, safety first policy, to participate in safety activities, know safety education.

3. Seriously study and master the safety operation procedures and related safety knowledge of this type of work, conscientiously implement the requirements of safety technical disclosure, and obey the supervision and guidance of safety production management personnel with an open mind.

4, the correct use of protective, cold supplies and safety production equipment, take good care of the safety signs of safety facilities, obey the distribution, stick to their posts, do not arbitrarily start the mechanical and electrical equipment operated by others, and strictly abide by job responsibilities and safety operation procedures.

5. Do not drink for four hours before going to work; Strictly implement the "three-work system" and improve the safety production level of self-prevention, mutual prevention and joint control.

6, check the tools and equipment used before going to work, after work for cleaning, maintenance, maintenance, found unsafe factors in the work, to immediately report to the class, team leader, and put forward suggestions for improvement.

7, beware of safety accidents, to ensure the realization of the goal of safe production, in the event of an accident, the courage to rescue, and immediately report to the superior.

8. In case of an accident or near-miss accident, immediately report to the team leader, participate in accident analysis, draw lessons from the accident, and put forward reasonable suggestions for improving safety production and working conditions.

9. Have the right to report all the information about safety in production, and have the right to refuse the construction in case of serious personal danger and no guarantee measures, and report it immediately or to the relevant departments.

Fourth, others:

1. After signing, it means that both parties (responsible persons) are familiar with the safety responsibilities of this post and are willing to earnestly perform them.

2. This responsibility letter shall come into effect and be terminated as of the date of signing, and shall be terminated at the same time after the expiration or termination of the labor contract of the team (worker).

3. Number of copies: This agreement is made in triplicate, with the same effect. One for Party A, one for Party B and one for Project Department.

Party A: (Seal) Party B: (Seal)

Representative: (signature) Project Manager: (signature)

Responsibility Letter for Construction Site Safety 2 In order to implement the Law on Safety in Production, adhere to the policy of "safety first, prevention first, comprehensive treatment", implement the "responsibility system for safety in production", strengthen safety management, ensure the safety of employees and equipment, and ensure the smooth progress of XXX wind farm project, the monitor and XXX signed a responsibility letter for safety in production after research and decision by the leaders of the project department and the project safety leading group.

I. Responsibility

1, firmly establish the idea of "everyone is responsible for production safety" and resolutely implement the policy of "safety first, prevention first and comprehensive management". Earnestly study and consciously abide by the Safety Production Law, the Regulations of Sichuan Province on Safety Production Management and other safety production laws and regulations, conscientiously study and consciously abide by the safety production rules and regulations formulated by the Engineering Bureau, sub-bureau and this project department, so as to prevent or reduce the occurrence of casualty accidents and ensure the safety and health of individuals in production activities.

2. Seriously study the rules, regulations and measures related to safe and civilized construction and environmental protection, strictly abide by the safety production rules, regulations and operating procedures of the sub-bureau and the project department, obey management, and do not operate illegally.

3. Wear and use labor protection articles correctly and check their reliability before use.

4. Before the construction project starts, seriously accept the safety technical disclosure and sign the disclosure.

5, under the leadership of the monitor, seriously participate in the "three tasks" education, adhere to the "five minutes" safety education before class, check the workplace before operation, take safety protection measures to ensure that you don't hurt yourself, others or others. Clean and tidy the workplace in time before work.

6. Do not operate machinery, equipment and instruments that are unfamiliar or not used in this major.

7, the correct use and care of safety facilities, without the approval of the security department or full-time security officer, shall not be removed or misappropriated safety facilities.

8, found in the construction of an emergency that directly endangers personal safety, have the right to stop operation or take possible emergency measures to evacuate the workplace.

9, found in the construction of dangerous hidden dangers or other unsafe factors, should be properly handled and immediately report to the project department security department or related personnel. For construction projects without safety construction measures and safety technical disclosure, as well as illegal operations and forced risks, they have the right to refuse construction, and can report and accuse them beyond their level;

10, actively participate in "Safety Month" and "Safety Hundred Days" education activities, and actively put forward suggestions for improving safety work.

1 1. Respect and support the work of safety supervisors and obey their supervision and guidance.

12. In case of a production safety accident, the injured person should be rescued immediately, the scene of the accident should be protected and relevant personnel should be reported in time; When accepting the accident investigation, it shall truthfully reflect the situation. When analyzing the accident, we should actively put forward improvement opinions and preventive measures.

Second, power.

1, have the right to refuse construction for construction projects without safety construction measures and technical disclosure of safety construction, and have the right to report to superior leaders and departments.

2, have the right to refuse the illegal command of leaders and departments at all levels.

3. Have the right to stop and correct the illegal operation of others.

4. Have the right to criticize, report and accuse acts that endanger life safety and health.

Third, the evaluation principle

1, adhere to the principle of "responsibility implementation, risk taking, expected assessment and clear rewards and punishments".

2. The assessment adopts a percentage system, and the assessment points are not capped.

3. The responsible person shall pay the safety risk of mortgage during the assessment period, with the amount of A0=300 yuan.

4. The project manager entrusts the deputy manager in charge of safety to conduct daily assessment on those responsible and make a year-end summary; The project manager cashes it according to the year-end assessment results.

5. If the person responsible at the end of the year is rated as an advanced individual in production safety by the superior unit, the superior unit will reward him, and the project department will not reward him separately. Principle.

6. The project manager implements "safe production" target management for the responsible person. The full mark of the target assessment is Q0= 100, and the comprehensive score of the year-end assessment is q, so the calculation formula of the cash reward and punishment amount in the year-end assessment is: A=A0X 1/3.

Fourth, the assessment rules

1, in the superior safety inspection (within the responsibility of the responsible person, the following rectification notice shall prevail), 1-2 points will be deducted once, and 5- 10 points will be deducted once if the responsible person fails to handle the on-site violations properly or even finds dereliction of duty.

2. If the responsible person is issued a ticket, 2-5 points will be deducted each time.

3. If the responsible person fails to do a good job within the scope of duties, 2- 10 will be deducted for each item.

4. If the responsible person is under any of the following circumstances, it shall be implemented in accordance with the industrial injury management measures formulated by the project department. () After the responsibilities are clearly defined, the responsible person shall be given corresponding administrative treatment and economic punishment, and the responsible person shall be deducted according to the following assessment principles.

(1) If the responsible person has a minor injury accident, 30 points, 20 points, 10 points and 5 points will be deducted from the assessment scores of the responsible person according to the total, major, equal and minor responsibilities.

(2) If the responsible person has a serious injury accident, the assessment score of the responsible person shall be deducted by 50 points, 40 points, 30 points and 20 points respectively according to all, major, equal and minor responsibilities.

(3) If a class member of this class has a minor injury accident and the responsible person has management responsibility, 5- 10 points will be deducted at one time.

(4) If a class member of this class is seriously injured, and the responsible person is responsible for management, a one-time deduction of 10-20 points will be made.

⑤ If a shift leader of this class dies at work once, and the responsible person bears the main management responsibility, the assessment score will be deducted in full, and if he bears the secondary responsibility, the assessment score will be deducted by 20-50 points.

6. If the responsible person causes injury accidents to others, the assessment scores of the responsible person shall be deducted by 50 points, 40 points, 30 points and 20 points respectively according to all, major, equal and minor responsibilities.

5. In case of a major dangerous accident, the responsible person will be deducted 2-8 points each time.

6. In case of mechanical and electrical equipment, traffic, fire and other accidents. If the direct economic loss of the team is less than 20,000 yuan, the assessment score of the responsible person will be deducted by 30 points, 20 points, 10 points and 5 points respectively according to the total, major, equal and minor responsibilities.

7. After deducting the safety risk of the responsible person from the mortgage payment, a mortgage payment of the same amount shall be paid separately.

8. Whoever conceals, delays reporting or falsely reports the accident, intentionally destroys or forges the compilation of the accident scene, will be fined 500 ~ 1000 yuan to the responsible person; If the circumstances are serious, it shall be handed over to judicial organs for handling.

9. The responsible person shall be transferred from the project department during the assessment period, and the term of office of the responsible person shall be assessed. Safety responsibility rewards and punishment will be cashed after being audited by the project department manager, and the remaining mortgage will be refunded.

Verb (abbreviation of verb) supplementary clause

1. This Responsibility Letter shall come into effect after being signed (sealed) by the project manager and the person in charge, with each party holding one copy.

2. This "Responsibility Letter" shall take effect as of the date of signature.

Signature (seal) of monitor:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Signature (seal) of person in charge:

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Construction site safety responsibility book 3 In order to ensure the construction safety of outdoor decoration project of XX building, the construction director solemnly promises that he will be responsible for the safety management within the construction scope according to the construction contract. The basic contents of the commitment are as follows:

A, commitment during the period of construction, in strict accordance with the requirements of the decoration engineering site contractor, in accordance with the relevant laws and regulations, clear safety responsibility, do a good job of construction organization and construction safety prevention, obey the inspection and supervision of XX property management co., LTD. ..

Second, promise to carry out safety education for construction personnel, have a sound safety management system and training and education records, and ensure that construction personnel do not violate the company's safety regulations and national laws and regulations, and obey the supervision of XX Property Management Co., Ltd.

Three, commitment to civilized construction, to ensure that the scene does not appear fire safety accidents and industrial accidents, set up a site safety director, to explain to XX Property Management Co., Ltd. the construction of fire control, safety work guarantee and the implementation of the construction plan, to ensure the safety of construction personnel, the company and third-party personnel and property. In case of any accidents or casualties caused by construction, the constructor promises to take full responsibility, which has nothing to do with XX Property Management Co., Ltd. ..

Fourth, provide employees with labor protection articles that meet the national standards or industry standards, and supervise and educate them to wear and use them correctly according to regulations.

Commitment to the construction personnel consciously abide by the property safety management regulations of XX Property Management Co., Ltd., and in case of man-made unsafe behaviors that endanger personal and property safety, they must immediately and unconditionally rectify and accept the inspection and supervision of functional departments.

6. When the safety supervisors of 6.XX Property Management Co., Ltd. find that there are major unsafe factors, they have the right to ask the construction party to stop work for rectification at any time, and the construction party shall not continue to work illegally.

Seven, this letter of commitment is an effective proof of construction safety supervision, with legal effect. If the commitment party violates it, it shall be handled in accordance with the above opinions.

Eight. Security issues include but are not limited to the above. For matters not covered, refer to national laws and regulations and the terms of this undertaking.

This undertaking is made in duplicate. (one for XX Property Management Co., Ltd. and one for the construction director)

Person in charge of construction: ID number:

XX Property Management Co., Ltd.: ID number:

Date: Date:

Tel: Tel:

Responsibility Letter for Construction Site Safety 4 In order to effectively curb the safety accidents in the construction field and strengthen the construction safety management of village (residential) housing construction projects, according to the People's Republic of China (PRC) Construction Law, the People's Republic of China (PRC) Safety Production Law and other relevant laws and regulations, combined with the actual situation of a town, the town government has signed a responsibility letter for construction safety management in order to strengthen the construction safety management.

A, where my town within the jurisdiction of the collective construction projects and villagers' self-built housing projects, before the project starts, the construction party needs to go through the project start-up filing procedures at the urban construction department of the Town People's Government, and sign the safety management responsibility letter at the Safety Supervision Office of the Town People's Government.

Two, construction projects, should choose qualified units or qualified individuals to design and construction projects, and bear the responsibility for project safety according to law.

3. For the construction team hired by the villagers themselves, the villagers shall sign a safety responsibility letter with the hired construction team to clarify their respective rights, obligations and safety responsibilities, and the villagers shall urge the person in charge of the construction team to do a good job in safety education for employees.

Four. Safety production duties that operators should perform after admission: master safety production skills, participate in safety training, obey safety management, abide by rules and regulations, and correctly wear and use labor protection articles, such as safety helmet, safety belt, goggles, dust mask, insulating gloves, insulating shoes, etc.

Five, the construction site of the construction hole, stairs, elevators and openings, as well as in the balcony, roof and other unprotected limb operations, according to the construction site protection standards, correctly set up protective devices, limb set up two protective railings, closed with federated eye network.

Six, the construction of temporary electricity management

1, temporary power distribution system should adopt three-level distribution, step by step protection. The installation and internal setting of distribution boxes and switch boxes at all levels must comply with the relevant regulations, and the electrical appliances in the box must be reliable and intact, and their selection and setting values should comply with the regulations. Switchgear should be marked with its purpose, and the wiring diagram should be drawn on the front door of the electrical box.

2, the use of line lights and low-voltage lighting lamps, the power supply voltage should not exceed 36 V. When working in damp and metal containers, low-voltage lighting should be used, and the lighting voltage should not exceed 24 V.

3. When using small electric tools, insulating gloves and shoes should be worn, and the cables used should meet the requirements of relevant regulations.

Seven, construction machinery safety management

1. All machinery used shall comply with relevant regulations and requirements, and shall be maintained regularly, and the "cross operation method" of cleaning, lubrication, firmness, adjustment and corrosion prevention shall be strictly implemented.

2, the use of mixers, winches, steel processing machinery and other equipment operators, should hold relevant certificates, and operate in strict accordance with the safety operation procedures.

3. The safety protection devices of mechanical equipment on the construction site must be complete, sensitive and reliable.

4. In the process of operation, temporarily rented cranes, such as car cranes, should ensure a safe working environment and avoid cranes working under transmission lines; At the same time, in the process of lifting materials, there should be someone who is responsible for the command.

Eight, the construction party should conscientiously perform the duties of construction safety management, responsible for safety construction management, such as safety accidents caused by the construction party's failure to perform the construction safety regulations, the town people's government will give necessary sanctions within its scope of authority.

Party A: _ _ _ _ _ _ _ _ (signature and seal)

Party B: _ _ _ _ _ _ _ _ (signature and seal)

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Construction Site Safety Responsibility Letter 5 Party A: (hereinafter referred to as Party A) _ _ _ _ _ _

Party B: (hereinafter referred to as Party B) _ _ _ _ _ _

According to the requirements of relevant national safety laws and regulations, combined with the actual situation of our company, we will conscientiously implement the "6 1" instruction, implement the policy of "safety first, prevention first" and the principles of "who is in charge, who is responsible" and "safety must be paid attention to in production", and implement the safety responsibility system. In order to ensure construction safety and prevent accidents, Party A and Party B must perform the following clauses:

1. Party A shall fully cooperate with the security work of this project, supervise and inspect the security work of Party B at the same time, and have the right to require Party B to rectify the violations, illegal acts and potential safety hazards found in the inspection.

2. Party A shall, according to the requirements of the company, notify Party B of the problems found in the inspection in writing and file them for future reference.

3. Party A has the right to punish Party B's "three violations" according to relevant management measures.

4. Party A shall report the safety management of the decoration project to the company in time.

5. Party B must have a clear legal person in charge of safety, who is responsible for the safety and public order of the construction project, so as to achieve "five simultaneities" of construction and safety.

6. Before entering the construction site, Party B must register and pass for the construction personnel, and designate a special person to do the inspection. Unlicensed persons are not allowed to enter the construction site.

7. Before Party B takes up his post, he must be responsible for the safety education of construction personnel, make clear the relevant safety regulations and work requirements, and consciously abide by the safety management system.

8. Party B must be equipped with full-time or part-time security personnel during the construction period, specifically responsible for the implementation of safety and public security precautions during the construction period.

9. The inflammable, explosive and dangerous goods used by Party B in the construction must be restricted, and a special person shall be appointed to take charge of safety management.

10. When Party B uses fire, electricity and welding in the construction, it must be approved by the person in charge of Party B's site, and strictly implement the technical specifications and operating procedures of fire, electricity and welding to ensure foolproof. (Oxygen cylinders and acetylene cylinders shall not be inverted, with damping rings, and their number shall be strictly controlled. The spacing is greater than 5m, and the distance between the open flame and the acetylene bottle must be greater than 10m. There is a special person to eliminate flammable materials, put a fire extinguisher on site, leave a special person on duty after welding, and leave after confirming that there is no problem.

1 1. Party B's electricians and electric (gas) welders must hold a valid Operation Certificate for Special Industry Personnel issued by the labor department before they can operate according to the requirements of construction site specifications.

12. Party B must carry out the construction in strict accordance with the national safety construction standards for building decoration industry and resolutely put an end to "three violations".

13. When Party B uses large-scale equipment in construction, it must fully consider the bearing capacity and seismic capacity of the floor, and can only use it on the premise of ensuring safety. It is strictly forbidden to command and take risks in violation of regulations.

14. Party B must carry out safety protection for dangerous holes (access openings, elevator openings, reserved openings, stairs, etc.). ) During construction, the safety rope for aerial work must be fastened.

15. Smoking, using naked flames, leaving behind construction workers and using electric water heaters are strictly prohibited in the decoration area.

16, it is forbidden to pile up a large amount of waste for a long time in the construction area, block the evacuation passage, and insist on cleaning it up once a day, especially the empty bottles such as glass glue and paint should be properly handled.

17. Party B must strictly manage the construction site, and the equipment, equipment, tools and materials on the construction site must be managed by special personnel.

18. Party B must equip the construction site with fire-fighting equipment that meets the specifications and standards to ensure the safety of the whole construction process.

19. If Party B neglects safety management or violates the provisions of the contract, resulting in accidents and cases, Party B shall bear all the responsibilities, and all the economic losses and political impacts brought to Party A therefrom shall be borne by Party B. ..

20. This responsibility shall come into effect as of the date of signing, and shall become invalid after the project is accepted, in duplicate, one for the owner and one for the construction unit.

Party A: _ _ _ _ _ _ Party B: _ _ _ _ _ _

Representative signature: _ _ _ Representative signature: _ _ _

Signature of Project Supervisor: _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

;