What is the water pressure standard for 33-story high-rise water supply?

The water supply pressure must be within the standard range, and you can achieve the desired effect when using it. If the water pressure is not enough, it is difficult to use. Let me talk about the water pressure standard for a 33-story building.

What is the water pressure standard for 33-story high-rise water supply?

It will not exceed 0.35MPa, and the lower the floor, the lower the water pressure. The 33-storey high-rise building needs secondary pressurization, because the pressure of municipal tap water supply is only enough to meet the demand of less than 6 floors, and the higher the floor, the higher the water pressure will be. Generally speaking, the water pressure of high-rise tap water will be around 0.3-0.5Mpa, which will be higher than municipal water.

What should I do if the tap water level is low?

1. If the water pressure in the whole area is not enough, this situation is caused by the water supply problem of the water supply company. You need to call the local water company, or report to the relevant staff and ask professionals to repair it.

2. If you live in a residential area, supply it directly to the master list of residential areas. This is the responsibility of the material company. If you encounter low water pressure, you can complain to the property company first, and the property company will arrange personnel to solve it.

3. Some communities with high floors are prone to unstable water pressure. At this time, you can consider installing a booster pump at home, which can increase the pressure of installation water and is very convenient to use.

4. The booster pump can be installed under the kitchen sink. This position can be installed just right, and the water and electricity are reserved. The booster pump can be installed on the side to avoid noise from affecting neighbors. Installed in this position, it is convenient for later maintenance and use, and avoids trouble.

Summary: There are so many water pressure standards for 33-storey high-rise buildings, which will not exceed 0.35MPa. The lower the floor, the lower the water pressure. The 33-storey high-rise building needs secondary pressurization, because the pressure of municipal tap water supply is only enough to meet the demand of less than 6 floors, and the higher the floor, the higher the water pressure will be.