Matters needing attention in wall covering construction

During construction, we should choose the season when the air relative humidity is below 85% and the temperature changes little, and resolutely avoid construction in wet season and wet wall.

ventilate

After construction, open the doors and windows during the day to keep ventilation; Close the doors and windows at night to prevent moisture from entering. Wall covering, which has just been pasted on the wall, is forbidden to be blown by strong wind, which will affect its bonding fastness and surface engineering.

clean

When sticking wall covering, the spilled glue should be wiped clean with a clean towel at any time, especially the glue marks at the joints. This is something that constructors or supervisors must carefully check. Construction personnel should keep their hands and tools highly clean. If there is any stain, it should be cleaned with soapy water or detergent in time.

Thoroughly clean up

Foamed wall covering is easy to accumulate dust, which affects the appearance and neatness. Clean every 3~6 months. Scrub with a vacuum cleaner or brush dipped in clean water, and be careful not to let water penetrate into the joints.

protect

Usually pay attention to prevent hard objects from hitting and rubbing the wall. After a certain period of time, joint cracks in some places should be subsidized in time and not allowed to develop.