What will be asked during the volunteer teacher interview? What do you look for most in volunteer teaching recruitment?

What will be asked during the volunteer teacher interview? What do you look for most in volunteer teaching recruitment?

Credibility is important, so answer questions as honestly as possible. Has anyone participated in an interview for a three-support and one-support teacher? What will they ask?

Are they patient with children? Can you tolerate tough conditions? Can anyone insist on doing IPQC? What will be asked during the interview

IPQC (InPut Process Quality Control) means process control in Chinese, which refers to the quality control of products from the input of materials into production to the final packaging of the product. . Also called quality control in manufacturing, or quality control during production. Since the inspection method adopted by IPQC is patrol inspection between various processes in the production process, it is also called patrol inspection. The general method used by IPQC is random inspection. The inspection content is generally divided into random inspection of the product quality of each process, inspection of the operating methods and methods of the operators of each process, and spot inspection of the contents in the control plan.

No matter what type of interview it is, the questions asked are the same, and they remain the same, and there are rules to be found. In fact, for all interviewers, there is only one purpose: to learn the most information about you in the shortest time. If you want to prepare for the interview efficiently, start with the following seven major aspects!

Basic information: Please describe your previous work experience and work results in the most concise language.

Professional background: What qualities do you think should be possessed for this position?

Working mode: Do you usually work alone or in a team?

Value orientation: What do you think of your original unit and boss?

Qualifications: How would you describe your personality?

Salary: Is it convenient for you to tell me what your current salary is?

Background Check: Would you mind if we ran some checks through your old organization?

Most interviews are basically inseparable from these questions. Of course, you may also ask some professional questions. For IOQC positions, they usually cover the purpose of IPQC, IPQC methods, IPQC process inspection work content, Ask job seekers questions about job responsibilities, etc. Therefore, job seekers who ask professional questions can make the following preparations:

Purpose of IPQC

The process of product realization is a complex human-computer interaction system, consisting of different processes. In this process, there is both logistics and information flow. If you want the output to meet customer requirements, you must achieve the following aspects:

Ensure input quality

Stable machine equipment , have sufficient capabilities, and personnel operate strictly according to standards

The key parameters (CTQ) closely related to product quality are in a stable and controlled state

The information is accurate, complete, timely, and able Play a guiding role

An effective process monitoring mechanism can detect process abnormalities in a timely manner

A forward feedback mechanism enables the process to correct abnormalities in a timely manner

Backwards The feedback mechanism can effectively prevent the loss of defective products

Audit of early and final products to provide shift quality assurance

Smooth process interface to prevent waste of resources

Execution of the above aspects It depends on the continuous efforts of IPQC, and it is with the above support that the process is the process of ensuring output quality in the true sense. Therefore, the work of IPQC realizes the transition from process to process, so that the output is no longer the input. Simply adding up, but adding value in quantity and quality.

IPQC methods mainly include the following methods:

Perform process audit according to the audit checklist - the basic status of the process does not change depending on the product

Process operation inspection - Materials, tools, auxiliary materials, methods, personnel confirmation

First article confirmation inspection—depending on the product, process, equipment, software, lead inspection

Records—authentic, clear, and timely

Feedback mechanism between each process - timely feedback of relevant information

Early warning mechanism works

Control of non-conforming products - identification, isolation, differentiated placement, statistical analysis

Material input - put the right materials into the right products at the right time, and record them promptly and accurately to facilitate traceability

Product standards - process standards, functional requirements

Sampling inspection of the output of each process - confirm that the process is stable, has sufficient capabilities, and the product is qualified

IPQC process inspection work content

Pre-production work preparation

According to the production plan, determine whether the BOM, ECN and color scheme of the production model are consistent with the online materials, and determine the inspection specifications. If there are samples for IQC incoming materials, provide the samples to IPQC and production inspectors to confirm whether there are incoming materials inspections. On-line selection; if it is on-line selection, IQC will guide the online operator to select according to the sample.

Whether the online materials meet the product BOM requirements, ranging from small screws to large cartons, whether each box (bag) of materials is changed is confirmed in time, and whether the online materials are complete in type, model and specification based on the product BOM and ECN correct.

Whether SOP/WI is hung, and whether the arrangement is arranged according to the process flow

Work content in process control

Fill in the inspection report carefully and on time (usually once every 2 hours ), check the electrostatic ring inspection record to see if all used electrostatic rings have been inspected and recorded; check the electric batch torque inspection table, whether the torque of the electric batch at the corresponding station meets the requirements of the SOP of the station and record the report

Check whether the corresponding number on the soldering iron inspection table and the temperature of the soldering iron at the workstation meet the requirements of the SOP and record the report. Whether the soldering iron has grounding and leakage prevention measures

Make sure there are qualified first parts, Sample

Use the first article and sample to check whether the instrument and fixture are normal; make sure it is within the validity period of the instrument calibration; confirm that the set parameters are consistent with the product requirements

Whether the employee operation is in accordance with the operation instructions Check whether the first 5 products in the drop-down list are followed from front to back, and check 5 /2H/stations again to confirm

Whether new products and new employees are inspected in a focused manner, special procurement, substitution, trial production, etc. Those who give in and release must focus on auditing, recording the situation and feedback on the results

The work should be placed in a fixed position, without accumulation, and should be handled with care. Employees should check themselves and each other before pulling down qualified products

Whether the unqualified products are marked and whether the unqualified products are recorded on time

If any incoming materials and poor operations cause the materials to be unable to be used normally and affect the completion of the order, abnormal orders must be issued in a timely manner; Feedback

If the defective ratio of the test station (such as semi-finished product test, functional test and appearance inspection station) exceeds the quality target, you must fill in the quality abnormality feedback form gt; gt; and track the processing results

A. Normal production (mass production)

Single item defective rate is 3--5 per hour, and a quality exception handling feedback form is required - engineering analysis

The total defective rate is 5-10 per hour, and a quality exception handling feedback form needs to be issued----Engineering Analysis

B. Trial production

The total defective rate is 10, and a quality exception handling feedback form needs to be issued. Feedback sheet----Project analysis

C. Line suspension notice

Single item defective rate per hour ≥ 5

Total item defective rate per hour ≥ 8

Requirement: Engineering analysis provides online solution within 1 hour Plan, if there is no reply, the line will be stopped

Whether the materials, semi-finished products and finished products are placed with implementation status marks and signatures

Inspection report records are complete, clear and clear at a glance, and whether every hour The accounting records "total number", "number of defects" and "defective rate" once. Does the daily production line QC test report include "total number of tests", "total number of defects" and "total defective ratio"?

Whether customer complaints and returns are understood and followed up.

The rework situation must be followed up, bad statistics and result feedback must be kept, and the "current situation", "current object" and "on-site" should be retained.

The sockets, batteries, contacts, etc. used for easy-to-wear tests should be replaced and recorded in a timely manner (such as , the charging port of the charger is fragile, causing the mobile phone charger interface to be damaged).

Any operation, packaging, and storage must not potentially affect the quality.

Customers relax product standards and When a function or appearance is fully accepted, the customer needs to sign a form for confirmation or sign a sample.

Customers’ requirements for product standard changes must be fed back to online PQC and QA in a timely manner to achieve standard unification

Based on the QA sampling results, evaluate and audit online PQC work, and make weekly summaries.

IPQC job responsibilities

Strictly follow inspection standards based on daily production To inspect the first production and inspection products;

Stamp the inspected first product with a qualified seal and place it in the corresponding position;

When unqualified conditions occur , relevant personnel should be notified immediately to make improvements to avoid batches of defective products;

Products with unstable quality should be tracked, and if there are problems, they should be reported to superiors or relevant personnel in a timely manner, and solutions should be found. Solve problems in a timely manner;

Assist supervisors in handling customer feedback and complaints, and ensure that defective and good products in warehouse inventory are effectively handled;

Responsible for signing and confirming the first item, and Ensure no production without samples and no shipment if unqualified;

Coordinate workshop quality management work.

Carry out inspection tasks and complete product inspections and random inspections based on the files and inspection instructions required by Huawei, ZTE, and each customer;

Prepare work orders, electronics, and BOM Confirm the first article and online materials such as architecture, ECN, contact sheet, software release form, and Checklist. (First article confirmation based on different inspection files according to different customer needs)

Cooperate with the production line return confirmation work

Point-inspect the inspection tooling device, and skillfully use the inspection tooling device to complete various inspection tasks

Inspect product labels based on the relevant file "Barcode Information Table" and perform scanning operations

Provide records of material trial production defects

Receipt of controlled files , classification, archiving and recycling

Conduct inspections and audits on production line 6S, ESD and other aspects that affect quality to promote improvement of production line processes.

Record and complete relevant quality reports. What should you pay attention to when teaching?

Where are you going? In terms of politeness and customs, you can directly search for the customs and customs of the area you are going to.

Safety: No matter where you go in summer, the most important thing is to prevent mosquito bites. Bring light-colored sweat-absorbent clothes, mosquito repellent and anti-mosquito tools, and medicines applied after being bitten. It is best to go to mountainous areas. Bring long pants and no sandals.

The environment in mountainous areas or rural areas is still very difficult. Bring more of what you like to eat, and bring some for the children. What questions will physical education teachers ask during interviews?

1. Self-introduction

2. Personal study, work, and practical experience

3. Understanding of the school you are applying for

4 , Why choose this school?

5. What do you think your advantages are when choosing this position?

6. Regarding your own career development plan, what questions will be asked during the civil service interview at the Public Security Bureau?

In fact, no matter what the interview format is, the questions asked are the same and vary. Regardless of the origin, there are rules to be found. In fact, for all interviewers, there is only one purpose: to learn the most information about you in the shortest time.

If you want to prepare for the interview efficiently, start with these seven major aspects!

1. Basic situation

1. Please describe your previous work experience and work results in the most concise language.

2. Professional background

What qualities do you think this job should have?

3. Working Mode

Are you used to working alone or in a team?

4. Value Orientation

What do you think of your original unit and boss?

5. Qualifications and Characteristics

How would you describe your personality?

6. Salary

Is it convenient for you to tell me what your current salary is?

7. Background Investigation

Do you mind if we conduct some investigations through your original organization?

Interviews at 95 are basically inseparable from these questions. Of course, you may also ask some professional questions. I think if you have done it before, it should not be difficult. Generally, interviewers will not ask too many questions. Asking professional questions. If you want to teach, what should you prepare?

Hello, I am very glad that you have the idea of ????teaching. I would like to express my approval and thanks for this. If you want to know more about volunteer education, it is recommended to go to China Volunteer Education on Baidu. The information on the official website is all true and reliable. Hope it helps. All the best. What will be asked during the back office interview at Ping An Insurance?

Different positions have different questions.

Frequently asked questions:

1. Self-introduction

2. Your understanding of the insurance industry

3. What advantages do you think are suitable for this? Position

4. What were the main difficulties you encountered in your previous study and work?

How did you overcome it? What should you bring to support teaching in mountainous areas?

I don’t know if there are bedding in the dormitory, so bring three sets of clothes, two pairs of shoes, and some daily necessities. They should be available there, so you don’t need to bring so much.

I wish you good luck and have a good time there. What do college students do as volunteer teachers in the summer? What preparations do you need to prepare for volunteer teaching?

Communication skills, situation control skills, and the ability to endure hardships and stand hard work . Volunteer teaching requires dealing with local students, adapting to the local environment, and the ability to live independently and arrange life.