Job Responsibilities of Laboratory Technician

Job responsibilities of laboratory technicians (selected 12 articles)

In today’s social life, job responsibilities are used more and more widely in life, and formulating job responsibilities can effectively standardize operations. Behavior. Does anyone know the format of job responsibilities? The following are the job responsibilities of laboratory technicians that I have compiled. I hope it can help everyone.

Job responsibilities of laboratory technician Part 1

1. Carry out work under the leadership of the department manager.

2. You must be highly responsible for your work and strive for technical excellence. Strictly abide by the inspection operating procedures, be fast, accurate, and truthful, and do not engage in fraud.

3. Number the samples during the test and place them in order. Make sure there is no mistake. Pay attention to moisture and rodent prevention.

4. Each batch of bulk raw materials must undergo routine inspections such as sensory, moisture, crude protein, crude fiber, crude ash, etc., and focus on testing the nutritional content of special-purpose excipients. For example, calcium hydrogen phosphate mainly detects calcium and phosphorus, and fish meal mainly detects crude protein, salt, etc. It is necessary to strictly control the inspection of raw materials entering the warehouse, and the right to stop unqualified raw materials from entering the warehouse.

5. The inventory of raw materials should be regularly sampled and tested, and the products on duty should be sampled and tested every day. A full analysis of each variety should be conducted every quarter. Unqualified products have the right to stop entering the warehouse and leaving the factory.

6. For quarterly testing, original records must be carefully and truly kept, and the test report form must be filled in strictly in accordance with regulations. The report must be timely.

7. If quality problems occur, you must cooperate with relevant departments to analyze and deal with the quality accident.

8. After each test, the glass instruments used must be washed, dried or put back to their original places. Other devices and reagents must be placed neatly, and care must be taken when leaving the laboratory. Turn off all power switches and faucets, and pay attention to fire prevention and theft prevention.

9. All pharmaceutical reagents must be classified and orderly. Toxic, corrosive, flammable, and explosive pharmaceutical reagents must be stored in special counters, and there are procedures for receiving them.

10. Properly keep product labels and instructions, establish signature procedures for receipt, and stamp product qualification stamps according to production varieties and quantities every day. Inventory labels and instructions must be submitted to the office at the end of each month for printing arrangements.

11. Maintain indoor and outdoor environmental sanitation and keep the indoor clean and ventilated. Job responsibilities of the laboratory technician Part 2

1. The water quality in the boiler must be extracted and tested every day to ensure that the water quality is qualified.

2. When extracting furnace water and measuring the alkalinity of the furnace water with a burette, do not exceed 20 drops per day.

3. Use test paper to measure the hardness index of soft water. The standard is PH value, which cannot exceed 7. When measured with a hydrometer, it cannot exceed 0.3.

4. For water quality that exceeds the standard in measurement, replace the salt and backwash the ion exchanger with salt. Only when the forward washing reaches the standard can it be used normally.

5. After the test, clean up various instruments, reserve test samples, salt, etc., and store them reasonably.

6. Measure the pH of the water in the desulfurization water pool, and report the measurement results to the supervisor in a timely manner.

7. Carry out inspection and maintenance of water quality treatment equipment.

8. Complete temporary tasks assigned by superior leaders.

9. Keep records after the test every day and hand over the shift carefully. Job Responsibilities of Laboratory Technicians Part 3

1. Carry out inspection and analysis according to the test method standards of each test item, be familiar with the operating procedures of the instruments and equipment used, carefully fill in the working status of the instruments and equipment and record them.

2. Fill in the sample handover form carefully.

3. Comply with the analysis and measurement control procedures, carefully fill in the original inspection records, ensure that the analysis data is accurate and reliable, and be responsible for the quality of the inspection.

4. When abnormal test results are found, find the cause, re-measure the sample, and report to the person in charge in a timely manner.

5. Clean, classify and store laboratory utensils to keep the room clean and hygienic.

Sixth, work hard to learn business knowledge, study detection technology, explore and master analytical methods, and continuously improve detection levels.

7. Consciously abide by the factory's rules and regulations, stick to your job, pay attention to safe operations, and check whether the water, electricity, doors, and windows are closed before leaving get off work.

8. Be familiar with the relevant laws, regulations, standards and rules and regulations on sewage treatment, testing and discharge, strictly abide by professional ethics, and do a good job in testing in a practical and realistic manner. Job responsibilities of laboratory technician Part 4

1. Carry out work under the leadership of the director.

2. Laboratory technicians should consciously abide by the company's rules and regulations, stick to their posts, and accurately check their daily work on time to ensure the fairness and seriousness of the inspection work. We must be highly responsible for our work, strive for technical excellence, strictly abide by inspection operating procedures, be fast, accurate, and truthful, and must not engage in fraud.

3. Laboratory personnel must strictly follow the current quality standards for sampling, inspection, calculation or judgment during work, pay attention to observe various phenomena that occur during the experiment, make original records in a timely manner, and strictly control Quality is the key.

4. Complete the inspection work on time and achieve the "three promptnesses" (timely sampling, timely inspection, and timely reporting) and the "five standards" (accurate sampling, accurate instruments, accurate analysis, accurate records and calculations, and accurate reporting) precise).

5. When inspecting original records, we must adhere to the principle of seeking truth from facts, record the original authenticity and completeness, and be responsible for all inspection results and conclusions.

6. Laboratory personnel must be familiar with the testing methods of the samples being tested and be proficient in using relevant pharmaceutical reagents. They should conduct the work in designated areas and pay attention to operational safety to prevent errors and accidents. You must be able to skillfully use various testing instruments and equipment, take good care of the instruments and equipment, and do a good job in cleaning and maintenance of the instruments.

7. Keep the laboratory clean and tidy. At the end of the test, all instruments must be cleaned according to regulations. The laboratory working platform is cleaned once a day and a general cleaning is performed once a week. All laboratory instruments have Place them in order and do not pile them up randomly.

8. Laboratory personnel should keep records of shift handovers and indicate the names of personnel on duty so that they can be traced back to their origins. Job Responsibilities of Laboratory Technicians Part 5

1. Carry out water quality testing work carefully and meticulously, effectively control the quality, and ensure that the water quality of the factory products is 100% qualified.

2. Take samples for testing every day in the finished product packaging workshop or barreling workshop. If there are any straws during operation, they should be cleaned with disinfectant water first, and then placed in a pressure cooker for disinfection to ensure that the entire testing process is completed in a sterile state.

3. If you find that the test results exceed the standard or show signs of exceeding the standard (less than three Escherichia coli per 100 milliliters, less than 100 bacteria per milliliter), you must go to the water treatment center to take samples directly for further testing and analysis. Find out why.

4. After the test results come out, you must fill in the test form carefully, make sure the numbers are accurate, the information is complete, and send it to the leader in charge of production for signature.

5. Laboratory instruments should be cleaned promptly after use, and the laboratory should always be kept in good sanitary condition, with the windows kept clean and spotless.

6. While doing water quality testing, complete other tasks such as packaging of finished products according to needs and arrangements with leaders. Job Responsibilities of Laboratory Technician Chapter 6

1. Responsible for the laboratory testing, test analysis and identification of raw ores, iron concentrates and samples in the production process of the entire factory;

2. Strictly follow laboratory testing Operate according to the analysis procedures to ensure the accuracy and reliability of the data;

3. Make original records and record the relevant data clearly;

4. When the laboratory analysis results are abnormal, they should be reported immediately Report to the factory leaders so that the causes can be analyzed in a timely manner and solutions can be found;

5. Ensure the working environment is clean and tidy, and protect the laboratory equipment and laboratory drugs;

6. Obey the work Arrange and complete other tasks assigned by the leader.

Job Responsibilities of Laboratory Technicians Part 7

1. Working principles of laboratory technicians: being objective and fair, seeking truth from facts, rigorous and honest, effectively controlling the quality of raw materials and products and monitoring process analysis to provide stable operation of production Tuning basis.

2. Strictly implement various analysis operating procedures to avoid the occurrence of various accidents.

3. Responsible for sampling and sensory inspection of incoming raw materials, responsible for inspection and testing of finished products and raw materials, responsible for routine testing items for product production process control, and filling in various original records and testing data in a timely manner to complete Do a good job in recording and organizing various reports.

4. Wear labor protection equipment in accordance with regulations, go to sampling points to take samples according to actual conditions, ensure that the samples taken are fully representative, and provide accurate laboratory project data for production in a timely manner, and strictly implement factory-level regulations Frequency of analysis, no delay or false reporting of analysis data.

5. Responsible for providing accurate and reliable analysis reports on experimental research on new processes, new materials, new products, etc.

6. In accordance with relevant regulations, the receipt, storage and safe use of chemicals must be done well, and damage to equipment must be recorded in a timely manner.

7. Responsible for laboratory hygiene and cleaning, ensuring that laboratory utensils and items are placed neatly.

8. Responsible for the classification and disposal of waste drugs and utensils in the laboratory to ensure compliance with environmental protection requirements.

9. Complete other temporary tasks assigned by leaders. Job Responsibilities of Laboratory Technicians Part 8

1. Responsible for the inspection of raw and auxiliary materials, packaging materials, semi-finished products and finished products;

2. Make inspection records carefully, and correctly handle and organize inspections Data;

3. Strictly implement the registration procedures for measuring instruments and inspection equipment, establish ledger files, and make accounts and materials consistent;

4. Supervise production work. Strictly operate in accordance with process documents and quality control procedures to help production workers analyze the causes of quality problems;

5. Unqualified products must be identified, recorded, evaluated and isolated, and disposed of in accordance with regulations;

6. Issue an inspection report and be responsible for the accuracy of the report. Job Responsibilities of Laboratory Technician Part 9

1. Be fully responsible for the quality management of the company, and establish and improve the quality management-related processes and systems of the company.

2. Conscientiously implement the national guidelines and policies on food quality management.

3. Responsible for the management of personnel, equipment and laboratory reagents in the department.

4. Responsible for the quality inspection and quality control of the company’s raw materials, in-process products and finished products.

5. Handle various quality issues in the company's production process to ensure the normal operation of the production process. Job Responsibilities of Laboratory Technicians Chapter 10

1. Test the quality of sewage and detect abnormalities in a timely manner.

2. Ensure the normal calibration and maintenance of water quality testing instruments and equipment.

3. Compare and calibrate the measurement work of online instruments through laboratory analysis and measurement, and report any abnormalities in a timely manner.

4. Inventory management of laboratory consumables, reagents, and consumables.

5. Conduct quality testing on purchased conventional chemicals. Job Responsibilities of Laboratory Technicians Chapter 11

1. Test various physical and chemical indicators of finished products, raw materials, and samples to ensure that the quality of products and raw materials meets standards.

2. Carry out sample retention and observation of test samples in accordance with relevant system requirements to ensure timely detection and disposal of abnormal conditions.

3. Implement records, files, and data management of laboratory test results to ensure the security and traceability of all data.

4. Implement laboratory drug management to ensure that the use of drugs is in compliance with regulations and that the use and storage of drugs are safe.

5. Regularly replace the samples at the company’s booth to ensure that the displayed samples are consistent with the actual situation.

6. Laboratory 7S management and instrument maintenance.

7. Other tasks assigned by superiors; job responsibilities of laboratory technicians Chapter 12

1. Adhere to the safety production policy, establish the idea of ????safety first, abide by labor discipline, and stick to the job , operate according to the chapter.

2. Test the quality of mine production and domestic wastewater.

3. Test the water quality of mine reuse water.

4. Test the boiler water quality.

5. If the water quality is unqualified, report it to relevant personnel in a timely manner.

6. Keep records and keep equipment and work areas civilized and hygienic. ;