How to clamp radial drilling machine

By adding some simple auxiliary tools, the radial drilling machine can play the role of lathe, milling machine and boring machine, and solve some problems in production and processing.

1. Fixing the auxiliary tool for clamping turning tool on the spindle of radial drilling machine can process the large hole end face of a certain part of a larger workpiece.

2. Make a clamping device for shaft parts that can move linearly manually and fix it on the workbench of radial drilling machine, so that pin grooves can be milled on shaft parts.

3. When machining large holes on the workpiece, if the workpiece is large in volume and complex in shape, it is not suitable for machining on other machine tools. Boring rod can be installed on the spindle of drilling machine, and can be processed after being installed as boring cutter. If drilling a hole on a rocker drilling rig, the upright post, rocker arm and spindle box should be firmly clamped to prevent the spindle from swinging and damaging the boring cutter during machining.

4. Machining larger holes on the metal plate or pipe arm can be cut with special tools on the rocker drilling machine. The cutter is equipped with two knives, which is more balanced and stable than one knife. The efficiency can be doubled. Before cutting, drill a hole with the same diameter as the support shaft in the center of the hole to be processed, and the support shaft extends into the hole to play a supporting role during cutting.