Lexing 804 can't be hung up before applying force.

According to the relevant data of the railway locomotive network, the reasons why the afterburner of Lexing 804 can't be applied are: 1. Engine failure: the engine loses power and cannot provide enough power to propel the vehicle, resulting in the afterburner not being connected, so it is necessary to check whether the engine is operating normally, such as whether the oil is normal and whether the valve is normal;

2. Transmission failure: Transmission failure, which makes it impossible to complete the gear shifting action, and then leads to afterburner failure. Need to check whether the transmission oil is normal and the clutch is normal;

3. Vehicle overload: the vehicle is overloaded or loaded with heavy articles, which makes it difficult for the vehicle to drive easily, thus causing the afterburner to be stuck. Check whether the vehicle is overloaded, lighten the load or unload some items;

4. Vehicle electronic system failure: Vehicle electronic system failure, such as sensor failure, short circuit, etc. , resulting in the vehicle can not work normally, thus affecting afterburner. Need to check whether the vehicle electronic system is normal.

The so-called afterburner means that the previous car was a rear-wheel drive, which was equivalent to a four-wheel drive, because the previous car generally had no front wheels, such as the previous 2 12 Jeep, which was divided into a rear-wheel drive and a four-wheel drive. Generally, it is a follow-up drive because the common driving mode of cars in the past was rear drive, unlike most cars now with front wheels, so the so-called afterburner is now a four-wheel drive car.