How to deal with the seams and cracks of marble water jet mosaic

The seam bonding of mosaic marble must be smooth. Spread paper on the platform first, preferably oily paper or wet paper, so that it is not easy to stick the paper. Then smooth the glass fiber net, coat a piece of glue on the mosaic that has been pre-spliced, use a square ruler and a guide rule as the basis, bond one by one, and squeeze one by one, usually with the bottom of the board facing down, until all the bonding is completed. In order to increase the strength of some patchwork after drying, a layer of glue can be evenly coated on the back of the glued patchwork and brushed gently with a brush, which can greatly enhance the firmness of the patchwork. Of course, imitating the mosaic method, the stone with more cracks can use the method of strengthening the net on the back to improve the strength of the stone. At present, many stone production lines have increased the process of sticking glass fiber reinforced plastic mesh after grinding, all in order to increase the strength of stone.

Generally, parquet marble is paved as a whole. Because of its large area, the surface smoothness is slightly different from that of ceramic tile or waveguide. Generally, after fixing the marble water needle, fill the gap and smooth the place with high and low drop. In order to make the marble mosaic surface smooth with the surrounding marble surface, it is always suggested to use fine grinding technology and wax oil to see the light.