Double tweed coat practice

The fabric inspector puts the fabric on the fabric inspection machine, observes whether there are defects such as color difference and holes in the fabric point by point through illumination, and issues a fabric inspection report.

Advantages: high-quality double-sided woolen cloth is strictly checked from the source to ensure that each fabric is flawless.

Step 2 cut

For the first time, the electric knife was used to make a preliminary cut according to the pattern, and then the precision gantry knife was used to make a precise cut.

Advantages: rough cutting and fine cutting are adopted to make the pattern more accurate and the edge of the garment piece clean and tidy.

3. Single piece inspection

The clothes carefully cut by the gantry knife need to be checked one by one to ensure that there are no defects.

Advantages: Carefully and repeatedly check the clothes, and constantly improve the quality of the clothes.

4, high temperature setting

After the garment pieces are cut, the inspection technician will arrange the garment pieces neatly and put them into the lining machine to stabilize the size.

Advantages: the size of the garment piece will not change because of humidity and temperature, so that the version is more accurate and the finished product is better.

5, piece by piece.

After the size is stable, the garment pieces are checked with the original order to ensure the consistency of the version. ICICLE has extremely strict requirements on the accuracy of the version.

Advantages: repeated inspection ensures accurate version and strong sense of clothing quality.

6, running line positioning

The depth of the seam is controlled by running line positioning, so as to ensure the consistency of the width of the manual seam.

Advantages: the positioning line can well prompt the operator of the required seam cutting distance, and there will be no error.

7, positioning seam.

Use a professional machine to cut the double-sided woolen cloth across the positioning line, and gently cut off the multi-section yarn connecting the two layers of fabric. This is a very delicate operation, and it is necessary to ensure that the fabric is flat and not damaged at all during the sewing process. The split garment pieces can be sewn by hand in the next step, so this is a very important process. Icicle workers engaged in this process have many years of operating experience and are very skilled.

Advantages: It is more accurate, meticulous and rigorous to determine the depth of the seam by positioning the seam by running the line.

8, positioning adhesive lining

High-quality ribbon adhesive lining will be selected at the splicing place of icicle double-sided woolen cloth, which will add a little bone feeling to the original soft woolen cloth and increase the support force when sewing two pieces.

Advantages: The adhesive lining of the ribbon at the flat-fell seam can not only make the finished product more firm at the flat-fell seam, but also make the flat-fell seam lines smoother and more delicate.

9, hand sewing-flat-fell seam

Pure hand sewing has very high technical requirements for workers. ICICLE employs a senior sewing teacher with many years of sewing experience to strictly control the manual process. Double-sided fabrics are sewn with delicate stitches, which hide the stitches and make the finished products very detailed. Within 3 cm, there are 1 1 needles, which are very dense and flat, the number of needles is even, the needle spacing is equal, and the pulling force should be even. Only in this way can we sew a high-quality double-sided coat.

Advantages: The special stitch method is adopted, which hides the stitches well, and the front and back sides of the stitching are also exquisite and flat.

10, hand sewing-knotting

The knot is tied by manual puncture needle for many times, which makes the front and back of the coat consistent and more firm and beautiful.

1 1, inspection of semi-finished products

After the manual sewing is completed, the semi-finished products should be inspected first to ensure that the sewing details of the products are flawless.

Advantages: the inspection of semi-finished products can minimize the defective rate of finished products and ensure the accuracy of the previous process. The quality of ready-made clothes will reach a higher standard because of repeated inspection.

12, ironing of semi-finished products

After strict inspection, the semi-finished products will be ironed, showing the basic outline of the whole garment, making the fabric smooth and convenient for the accurate positioning of the next auxiliary material process.

Advantages: As the saying goes, ironing is a very important link, which can make the outline of clothing more perfect and the fabric more smooth and exquisite. Ironing of semi-finished products can also make the positioning of accessories more accurate.

13, Shang ornaments

First, Niu Dong

The knotting process is completed in two steps, adding an imperceptible knotting process.

Advantages: The buttonholes completed by two processes are more exquisite and beautiful in appearance and more firm and wear-resistant in practicality.

B, buckle it

Each button wrapped in cloth is put into the button by a professional worker with the same amount of cotton and gasket. This process is all manual.

Advantages: the cotton-padded buttons are fuller, and there will be no ugly button prints when sewing on the front. As can be seen from the small links, we hope to strive for perfection in details.

C, button

It is hand-nailed, and the reverse side is fixed with small buttons to ensure that each button is very delicate and durable.

Advantages: Hand nailing makes the buttons firmer and the details more exquisite.

14, clothing inspection

After all the processes of garment production are completed, the self-inspection team will carry out professional and meticulous inspection on the garment.

Advantages: the professional inspection team ensures that every detail of the clothes reaches the highest standard.