Technical qualification certificate of chemical engineering specialty?

What are the evaluation conditions for intermediate engineers in chemical engineering and technology?

Evaluation conditions for intermediate engineers in engineering technology:

1, get a doctorate and pass the examination;

2. Get a master's degree or a second bachelor's degree and have worked as an assistant engineer for about two years;

3. Obtain a bachelor's degree or graduate from a university, and have worked as an assistant engineer for more than four years;

Graduated from junior college and worked as an assistant engineer for more than five years.

To apply for professional and technical qualifications, a prescribed academic certificate shall be issued. Professional certificates and other relevant certificates are not used as academic basis for declaration and evaluation. To obtain the corresponding foreign academic qualifications and degrees, it is necessary to provide the certification certificate of foreign academic qualifications and degrees of the Ministry of Education before the professional and technical qualifications can be assessed according to the corresponding academic qualifications and degrees. Those who have obtained the required academic qualifications after joining the work first can add up the service time before and after obtaining the academic qualifications, and those who meet the service time requirements can apply for a higher professional and technical qualification.

What qualifications can students majoring in applied chemical engineering take?

The major of applied chemical engineering can be tested by engineers (engineers refer to those who have the ability to operate, design, manage and evaluate engineering systems, that is, those who are engaged in R&D or management), quality engineers (institutions that implement quality management systems will set up such departments or posts, which are simply chemists) and chemical technicians (technicians are skilled workers with rich business knowledge and skilled operation skills in enterprises, and both workshop workers and chemists can take the test). After work, it depends on your participation in the work.

Applied chemical engineering major:

Main training links: various chemical unit operation training, chemical unit simulation and chemical device simulation training, comprehensive chemical process training, post practice, skill training and assessment, etc.

Employment orientation: technical personnel in front-line chemical production, workshop and team production technology management of large, medium and small chemical enterprises in Jiangsu Province. Analysis, inspection and management of raw materials and chemicals, industrial semi-finished products and finished products produced by chemical industry, coal chemical industry and related industries; Production posts in chemical enterprises are engaged in front-line operation, operation management and equipment maintenance; Chemical design and related functional departments are engaged in planning, management, standards, supervision, testing and technical consultation.

Hello, I want to take the advanced chemical test certificate.

The qualification certificate of chemical inspector belongs to the national "professional qualification certificate" of chemical analysis. The qualification certificate of chemical inspector is applicable to: food inspector, instrument analysis technician, chemical inspector, cosmetic inspector, feed inspector, ore inspector, material analyst, mineral analyst, coal quality inspector, water quality analyst, drug analyst, water treatment inspector, sewage treatment inspector, cement inspector, dyeing and finishing inspector, chemical product inspector, gas inspector, electroplating quality inspector, etc. Personnel who conduct chemical analysis and inspection of chemicals through sampling inspection (personnel who use chemical analysis instruments and physical and chemical instruments to inspect, detect, test, monitor and analyze finished products, semi-finished products, raw materials and intermediate processes).

Requirements for qualification examination of registered chemical engineer.

All People's Republic of China (PRC) citizens who abide by national laws and regulations, abide by professional ethics, have the corresponding professional education and professional practice conditions, and meet one of the following conditions, can apply to take the basic examination:

(1) Bachelor degree or above in this major (chemical engineering and technology, polymer materials and engineering, inorganic non-metallic materials engineering, pharmaceutical engineering, light chemical engineering, food science and engineering, bioengineering, etc.). ) or similar major (process equipment and control engineering, environmental engineering, safety engineering, etc.). ).

(two) to obtain a college degree in this major or similar major, and to engage in chemical engineering design for 1 year.

(3) Obtained a bachelor's degree or above in other engineering majors, and worked in chemical engineering design for 1 year.

Those who pass the basic examination and meet one of the following conditions may apply for taking the professional examination:

(1) Having been engaged in chemical engineering design for 2 years after obtaining the professional doctorate; Or after obtaining a similar professional doctorate, he has been engaged in chemical engineering design for 3 years.

(two) after obtaining the master's degree in this major, he has been engaged in chemical engineering design for 3 years; Or after obtaining a master's degree in similar major, he has been engaged in chemical engineering design for 4 years.

(3) graduated from a double bachelor's degree or postgraduate class in this major, and has been engaged in chemical engineering design for 4 years; Or after graduating from a double bachelor's degree or graduate program in a similar major, he has been engaged in chemical engineering design for 5 years.

(four) after obtaining a bachelor's degree or a degree that has passed the professional education evaluation, he has been engaged in chemical engineering design for 4 years; Or after obtaining a bachelor's degree or degree that has not passed the professional education evaluation, he has been engaged in chemical engineering design for 5 years; Or obtain a bachelor's degree or degree in a similar major, and have been engaged in chemical engineering design for 6 years.

(five) after obtaining a college degree in this major, he has been engaged in chemical engineering design for 6 years; Or after obtaining a college degree in a similar major, he has been engaged in chemical engineering design for 7 years.

(6) Having obtained a bachelor's degree or above in other engineering majors, having been engaged in chemical engineering design for 8 years.

65438+Before February 3, 20021,those who meet one of the following conditions may be exempted from the basic examination and only need to take the professional examination:

(1) Having been engaged in chemical engineering design for 5 years after obtaining the professional doctorate; Or after obtaining a similar professional doctorate, he has been engaged in chemical engineering design for 6 years.

(two) after obtaining the master's degree in this major, he has been engaged in chemical engineering design for six years; Or after obtaining a master's degree in a similar major, he has been engaged in chemical engineering design for seven years.

(3) Obtained a double bachelor's degree including this major or graduated from the postgraduate class of this major, and has been engaged in chemical engineering design for 7 years; I have been engaged in chemical engineering design for eight years after graduating from a double bachelor's degree or a graduate student in a similar major.

(four) after obtaining a bachelor's degree or degree in this major, he has been engaged in chemical engineering design for 8 years; Or after obtaining a bachelor's degree or degree in a similar major, he has been engaged in chemical engineering design for 9 years.

(five) after obtaining a college degree in this major, he has been engaged in chemical engineering design for 9 years; Or have been engaged in chemical engineering design for a total of 10 years after obtaining a college degree in a similar major.

(6) Obtained a bachelor's degree or above in other engineering majors, and engaged in chemical engineering design for a total of 12 years.

(seven) after obtaining other engineering professional college degree, engaged in chemical engineering design for 15 years.

(eight) after obtaining secondary school education, engaged in chemical engineering design work for 25 years; Or have been engaged in chemical engineering design for 30 years after obtaining technical secondary school education in similar majors.

According to the Notice on Approving Hong Kong and Macao Residents to Participate in the Qualification Examination for Professional and Technical Personnel held in the Mainland (No.9 issued by the Ministry of Civil Affairs [2005]), all Hong Kong and Macao residents who meet the corresponding provisions of the qualification examination for registered chemical engineers can sign up for the examination according to the procedures and requirements specified in the document.

What are the professional qualification certificates of chemical engineering?

Professional qualification certificate of chemical engineering specialty

There are mainly chemical master control certificate, chemical process inspection certificate, analysis certificate, environmental monitoring certificate, sewage treatment certificate and so on.

I work in a company engaged in chemical production. How to test the qualification of junior engineer? Thank you.

I. Applicants and Conditions

Who signed up for the engineering professional and technical qualification examination personnel should support the party's basic line, abide by social morality, and meet one of the following conditions:

Apply for primary qualification:

1, graduated from high school, engaged in engineering work for 5 years, aged 30 or above.

2, graduated from technical secondary school or junior college engaged in engineering work for 1 year.

3. Worked as a technician for 2 years.

For those who apply for primary qualification, whether they have the qualification of technician or assistant engineer shall be determined according to their comprehensive test results (written test and interview). For those who already have the qualification of technician, if their test scores are not up to the standard of assistant engineer, they cannot be promoted to the qualification of assistant engineer.

Apply for engineer qualification:

1, assistant engineer for 6 years.

2, graduated from technical secondary school as an assistant engineer for 5 years.

3, graduated from college (refers to the professional mismatch) as an assistant engineer for 4 years.

All the above time periods shall be calculated to 65438+the end of February 2003. Working years refers to the sum of working time in this major before and after obtaining relevant academic qualifications.

Second, majors and subjects

1, professional setting

Main business: construction, machinery, chemical industry, electronic appliances, aquatic products.

Intermediate: architecture

2. Examination subjects

(1) written test: four basic courses.

Intermediate buildings: construction organization, foundation, reinforced concrete and masonry structure, building mechanics.

Building foundation: construction technology, architectural drawing, construction project budget and mechanical foundation.

Mechanical foundation: mechanical foundation, mechanical drawing, material mechanics and mechanical technology.

Primary chemical engineering: organic chemistry, inorganic chemistry, analytical chemistry and fine chemical engineering.

Primary level of electronic appliances: electrician foundation, factory electrical control equipment, analog electronic technology, digital electronic technology.

Freshwater culture, aquatic animal diseases, ichthyology, new breed culture technology.

(2) Interview part: professional knowledge.

Third, the registration time and requirements

Registration time is arranged from June 16 to June 18.

To apply for engineering professional and technical qualification, I should fill in the Registration Form of Huzhou Engineering Professional and Technical Qualification Examination according to the conditions (see annex). All columns in the form must be filled in with photos, as well as a copy of ID card and 2 photos (one-inch recent photo). The application for intermediate qualification must be accompanied by professional qualification certificate, letter of appointment and academic certificate (copy), and the original professional qualification certificate and academic certificate should be attached when registering. After the applicant is audited by the unit, he will register at the county professional and technical title evaluation service center.

Four. organization work

The engineering vocational qualification examination is organized by the Municipal Vocational Evaluation Center. Pre-test training and textbook subscription are specifically undertaken by the county talent training and examination center. Those who apply for primary qualifications but do not have secondary school education and those who apply for intermediate qualifications but do not have college education or above should, in principle, participate in training.

Verb (abbreviation of verb) charging standard

1, examination fee

Written test: Elementary 50 yuan/Door, Intermediate 70 yuan/Door.

Interview: 80 yuan/person.

2. Training fee:

Foundation: 120 yuan/door

Intermediate: 180 yuan/door

3. Teaching material fee

Junior and intermediate 160 yuan/person

Six, engineering professional and technical post qualification examination is an important work to deepen the reform of professional titles and improve the evaluation and employment system of professional and technical posts. Personnel reform departments at all levels should attach great importance to it, carefully organize it and strictly control it to ensure the smooth progress of the examination.

Major in applied chemistry. . What qualifications can I take?

This is great. All undergraduate degrees majoring in chemistry belong to Huaying's best employment. Although some schools will belong to Huaying in the Institute of Chemical Engineering, they must have a good chemical foundation. In short, it's good to study this major. If you don't want to be too professional, the employment prospects are still good. If you want to engage in scientific research, then organic and Huaying, as well as analysis and polymers, are actually good.

I am an undergraduate majoring in chemical engineering. Now I am engaged in coating work in the glass factory. I want to take the vocational and technical qualification certificate. What is the professional title of coatings?

Without such a fine professional engineer, technicians and senior technicians don't need to take the exam. Now that you have graduated from college, you'd better take the road of chemical engineer. Help workers first, then engineers, and then senior engineers.

Can chemical engineering major take those certificates?

1. chemical engineer registration

Chemical engineers are generally suitable for students who do design. Moreover, the gold content of the chemical engineer exam is relatively high, but it is also the case, so the general pass rate is only a few percent.

The examination content is divided into two parts: basic examination and professional examination. The working years required for undergraduate and master's graduation are different, so it takes a certain number of years to be engaged in design major after graduation.

2. First-class constructor/second-class constructor

CET-4 and CET-6 are compulsory subjects in universities, and now many schools stipulate that you must pass CET-4 to get a diploma. But graduate students can't graduate until they pass CET-6.

Moreover, in many enterprises, not only foreign enterprises, but also private enterprises need to show these two certificates when recruiting.

Registered chemical engineer examination qualification, I am a chemical engineering and technology major, graduated from a chemical plant engaged in technical work, can I apply?

You can apply for the exam as long as you pass the exam. You'd better find a design unit to stamp it for you, so the audit will be no problem.

You can apply for a foundation after graduation. After passing the foundation, you can take the professional examination after working for five years.

There is only one proof after the foundation, which is meaningless.