Technical personnel's year-end summary

Technician's year-end summary 5 articles

While doing a good job, plan your own study plan and strive for a higher technical level. What should technicians write in their year-end summary? Next, I will bring you a year-end summary of technicians. I hope you like it!

Over the past year, I have always kept in mind the education and expectations of _ _ leaders, worked hard to overcome my weaknesses and improve my quality. Under the guidance and guidance of _ _, I have successfully completed various tasks, and my theoretical level and working ability have been significantly improved. One year's work and study are summarized as follows:

First, actively participate in the political education and theoretical study organized by _ _, and constantly improve their political and ideological awareness and theoretical level.

Over the past year, I know the importance of political work. As a technician of _ _, I know that my political and ideological awareness and theoretical level will directly affect all the soldiers in the institute. Therefore, in the past year, I have always been able to actively participate in various political education organized by Curry, actively transform my subjective thoughts in light of the actual situation, and enhance my political firmness. In addition, I know that my theoretical level is low, so I also make time to strengthen political study in my daily work. Through the study, my political and ideological awareness and theoretical level have been significantly improved. Only when the information is accurate and I understand it correctly can I implement all the rules and regulations of the warehouse.

Second, strengthen business study and constantly improve their business skills.

As a technician, I know that business work is the center of all work in the warehouse. Over the past year, I have always been able to carry out various work around business construction under the leadership of _ _ _, with the support and help of soldiers. While working, I always think that as a technician, my professional level will directly affect the completion of all the work. No matter what task you accomplish, if your professional level is not high and you don't know how to complete the task, how can you drive everyone?

Therefore, I often study business theory knowledge seriously, and constantly improve my business level through learning, and enhance my familiarity and familiarity with the performance, usage, technical parameters and maintenance methods of _ _ equipment and machines. I often read relevant books and ask questions if I don't understand them until I understand the problems. The same is true for other jobs; Such as planting trees, painting, wagon loading and unloading, workpiece processing, light box production and installation, etc., actively cooperate with the director's work and be a good right-hand man of _ _ _. Over the past year, under the leadership of _ _ _, with the support and help of the soldiers, I have successfully completed all the tasks assigned by my superiors.

Third, shortcomings

Over the past year, although some good achievements have been made, there are still some shortcomings.

1, the theoretical study time is less and needs to be strengthened.

2, their physical fitness needs to be strengthened.

3. There are still dead ends in management. You must learn from the director in the future and constantly strengthen your work experience.

In the past 20 years, I will, as always, strengthen my political theory and professional study, further improve my political and ideological awareness and professional level, and strive to build the maintenance center into a revolutionary team with political qualifications, excellent military skills, excellent work style, strict discipline and strong support.

Technician's Year-end Summary (Selected Part II) During my work in the coal industry, I didn't miss or waste every opportunity to exercise, which accelerated the continuous updating of my knowledge and the improvement of my quality. At the same time, I use my spare time to consult leaders and colleagues about mine ventilation and three defenses, and strive to combine mine ventilation with safety to make myself a chief defense officer suitable for coal mine work.

A, during the work, often go deep into the mine, ventilation, gas prevention, dust prevention, fire prevention and gas sampling.

In the room, the downhole logging data are sorted out. As a ventilation technician, I finished all the work on time according to the needs of production.

1. Production ventilation: In the past year, on the basis of reasonable mine ventilation system, in order to meet the needs of mining and continuous development and extension, the mine ventilation safety has been further strengthened and consolidated to ensure that the mine air volume meets the needs of various mining faces, thus providing detailed air volume basis for mine mining and guiding construction. Through a series of work such as mine ventilation design, original air volume cataloging, comprehensive cataloging and gas sampling. , mine ventilation facilities, air volume plan, gas inspection plan, roadway flushing plan, fire prevention plan, airtight inspection records, goaf gas detection and other mine ventilation data have been submitted.

2. Actively promote the application of advanced technological achievements, popularize and implement the technology of spraying inhibitor in mined-out areas, and build and officially operate the tube monitoring system for spontaneous combustion fire in coal mines. The system carries microcomputer analysis and control, high-precision chromatographic analysis and gas in the negative pressure of beam tube, which provides a basis for preventing coal seam ignition. Its main advantages are: it can realize the detection of gas parameters such as carbon monoxide, carbon dioxide, methane, oxygen, nitrogen, etc. underground, establish a gas sample database, and the gas analysis results are output by the special chromatographic analyzer for coal mine fire, and the changing trend of gas content at sampling points is displayed graphically, which has the function of monitoring the gas content exceeding the limit and realizing data analysis. The introduction and use of the system further improved the level of mine fire prevention and extinguishing.

3. Assist colleagues to establish digital mine model, introduce and apply mine digital software, and promote the change of technology and management mode of mining enterprises, which is expected to be completed by the end of this year.

Second, the problems existing in the work

Since I have been engaged in the work of one ventilation and three defenses, I deeply feel the busyness of work and the great responsibility; Big and small things are in the body, often pay attention to this end, but ignore that end, take it lightly, and work is not systematic and comprehensive, mainly in the following aspects:

(1) Just came to work in Linfen, there are some differences in coal fields across regions, and the understanding of complex areas of ore bodies is not deep enough.

(2) The local personnel of the ventilation team have poor language communication, and the discussion at the meeting is not connected with the actual work.

Although the above problems have little impact on my work, I always feel that I have not fulfilled my duties as a technician, and I will try to do better in my future work.

During my one-year work in the _ _ coal industry, I have a systematic understanding of the ventilation system, gas prevention, dust prevention and fire prevention of the whole mine, which has a great guiding role for my future work in the _ _ coal industry. I also learned the detection of harmful gases. Knowing and mastering the workflow and situation of "one ventilation and three defenses are the most important" will be of great help to my future work in the mine.

III. Future Work Plan

Summing up the work in the past year, although some progress and achievements have been made, there are still some shortcomings. Strengthening innovative work ideas and personal work are not perfect. In my future work, I will try to find out the shortcomings in my work so as to overcome them in my future work. At the same time, you need to read more books, study norms, procedures and related documents, master professional knowledge, improve your work ability, strengthen your sense of responsibility, and do your personal work in time.

Constantly sum up and reflect, constantly spur yourself to enrich your energy, improve your quality and business level, in order to adapt to the development of the times and enterprises, and make progress and growth together with the company.

Technician's year-end summary (selected part 3) I joined the work after graduation and have been engaged in technical construction in the construction unit. I have certain construction experience and am confident that the project of Building _ _ will be handed over to the owner smoothly.

Engineering construction is a process of transforming designers' thoughts from ideology to material form according to design drawings. To do a good job in engineering construction, we must first be familiar with the construction drawings, grasp the designer's intention, and complete the process of understanding the design intention from the drawings, and then go back to modify the drawings (that is, complete the joint review of the drawings before construction). Secondly, it is necessary to strengthen the understanding of drawings, be familiar with the basic situation of the project, consider the specific construction scheme, and preliminarily clarify the key points and difficulties of engineering and technical construction, so as to prepare for future construction operations.

In the process of engineering construction, surveying and setting out is the most important, which runs through the whole engineering construction and is the soul of engineering construction. The project must be done well, and the survey and setting-out work must be done well, so the procedures of measurement, proofreading and rechecking must be indispensable (the survey and rechecking work must not be done by the same person); Secondly, it is necessary to proofread each construction layer, construction section and construction point in combination with a full set of drawings to avoid missing a small part of the project; Thirdly, it is to check and implement whether the understanding of the actual operation layer of the project is consistent with your own ideas, communicate in time when problems are found, and prevent problems before they happen.

After the construction of a certain project section is completed, it is necessary to check and accept it in time, sum up experiences and lessons, correct the problems found in the next construction section in time, and reduce the continuous occurrence of errors.

Engineering construction is a very rigorous work, and engineers and technicians must carve it as their own artistic products, strive for perfection, have a good work style, work with a responsible attitude towards the country (not wasting resources), society and owners, and have the determination to "do a project, build a monument and win a reputation" in order to do a good job and become a qualified project.

Engineering construction is a group work, which cannot be completed by one person or several people. This is a complicated job, which requires the close cooperation of quality inspection stations, design institutes and workers. Therefore, it is particularly important to do a good job in mutual contact and cooperation, otherwise, doing a good job in the project will become an empty talk.

As the saying goes, if a migrant worker does not consider the economic benefits of his boss and company, he will ruin his future, and he will not be a qualified migrant worker and will be eliminated by society sooner or later. The engineering construction face is large and there are many workers. In order to achieve good economic benefits, material management is very important. However, it is not enough to manage materials only by one person or several people. It needs the joint efforts of everyone. As a technician, we should not only consider how to save materials from the technical point of view, but also cooperate with the project manager and colleagues to effectively monitor the site, so that the workers on the site can develop the good habit of saving materials, create better economic benefits for the company and lay a good foundation for their own development.

The length of the construction period is also an important indicator to reflect the economic benefits of a project. Shortening the construction period can not only make the project put into production ahead of schedule and create considerable benefits for Party A, but also reduce the rental cost of many mechanical materials in our construction unit, reduce the cost of personnel management, reduce the construction cost for the company boss and improve economic benefits. In this respect, the interests of Party A and our construction unit are unprecedented, so the construction period is the focus of everyone's attention. As one of the project managers, we have the responsibility to assist the project manager and make suggestions for shortening the construction period.

A person's ability and energy are limited. In order to better understand the drawings and specifications correctly, frequent communication and asking for instructions in advance can avoid many unnecessary arguments and rework, unify everyone's thinking, and make the project meet the planned requirements smoothly and on schedule.

Although I am young and have limited work experience and construction experience, I will give full play to the advantages of young people, such as studious, diligent, energetic, make up for the above shortcomings, be diligent in asking questions, strive to become an excellent technical talent, and do my part for the development of Hongsheng Company.

I like my major and I love my post even more. I believe that under the guidance of Party A and the Engineering Department, the X building project can be successfully constructed and the completion acceptance task can be successfully completed according to the contract requirements.

Technician's year-end summary (selected part 4) is busy in spring, summer, autumn and winter, and it will be the end of the year in a blink of an eye. On the occasion of bidding farewell to the old and welcoming the new, I would like to briefly review my work and study in the past year and sum up my experience and lessons in my work and study. Prepare for self-examination in the future, foster strengths and avoid weaknesses in the future work, and do the work better.

As an electrical technician in a production line, I have been studying hard and actively analyzing and thinking about problems in the past 20x. At the same time, organize various activities of the department, and personal ability is gradually improved through continuous exercise. Learned a lot of experience and knowledge. However, due to the short working hours, there are many shortcomings in both professional ability and ideology. My knowledge, ability and experience are still lacking, so I need to devote myself to my future work and study, keep learning and accumulate experience.

Now I will make the following statement about my work in the storage and transportation processing department:

I. Maintenance and management of mechanical and electrical equipment

1, track the annual maintenance plan and monthly maintenance plan of the equipment in time; Assist electrician team leader in electrical maintenance and repair. At the same time, observe the running state of the field equipment and track the running state of the repaired equipment. Supervise, inspect and guide equipment operators and maintenance personnel to operate in accordance with the "three major" regulations at the job site, and put an end to habitual violations;

2. Complete the collection, sorting, filing and preservation of relevant electrical technical data. In the first half of the year, the technical parameters of the first phase system were verified and modified according to the actual situation on site, and the technical parameters of the second phase system were photographed and counted, forming a technical parameter manual, which is convenient for maintenance and operation personnel to inquire at any time. According to the actual production situation, revise and improve the operating procedures and operating procedures.

3. Participate in the investigation of equipment electrical accidents and faults, analyze the causes, formulate corrective and preventive measures, and keep case records.

4. Organize the electrical technical training in the department, make the training plan, select the trainer and arrange the training time to ensure the smooth completion of the training; I also organized my electrical maintenance personnel to participate in the technical competition of the same type of belt system in Zhakuang and X Coal Industry, which improved the technical ability of my electrical maintenance personnel to some extent.

Second, the project construction and outsourcing maintenance work

1. Track the construction of coal conveying system in power plant, carefully study the construction drawings, find design defects in time, and put forward rectification opinions.

2. Track the system settlement and related treatment, and write the explanation of the ground production system settlement and preventive measures of the storage and transportation processing department.

3. Communicate, coordinate and supervise the cleaning outsourcing, dust removal system maintenance and air conditioning maintenance of coal conveying system.

4. Track the maintenance projects planned for 20__ years and report them to the storage and transportation processing department for 20__ years.

Third, self-study

Understand and implement the learning concept of X Coal Industry, and keep in mind the enterprise learning concept that there is no job without learning. Use spare time to learn new knowledge and technology in electrical field and update knowledge in time; Also take the initiative to learn the knowledge of enterprise culture and enterprise management in the coal industry, and strive to become an all-round employee. And won the fourth place in X coal industry in the 20__ youth class selection examination, and was admitted to the youth class. At the same time, I can actively participate in various exams and competitions, constantly challenge myself and exercise myself.

Fourth, the lack of cognition

1, lack of work experience, need to study and practice at work, and use more brains.

2. Sometimes the work is poorly planned and not serious enough, and the work efficiency needs to be improved.

My theoretical level, professional knowledge and work experience are still lacking, so I need to study and practice harder.

Five or twenty years' efforts.

In 20__ years of work and study, I want to improve my professional knowledge and strengthen my sense of responsibility; Continue to strengthen study, broaden knowledge, study professional knowledge and related experience, and consult experienced people such as leaders and colleagues; In line with the principle of seeking truth from facts, actively do your own job without delay.

Technician's year-end summary (excerpts from the fifth part) Personal annual work summary, summary of technicians and budgeters of the construction unit: I didn't give up my job as a technician while working part-time. I have also served as the technical director of several sub-projects, including the first line of the power supply pipeline of the second phase project of the general bulk berth, and I am familiar with the equipment in the workshop. When the equipment is abnormal, I look through the old drawings for the first time. Discuss with experienced master and find out the line fault. Because some equipment has been modified many times, the modified state is not reflected in the drawings, so troubleshooting is a very frustrating thing. During this time, I have been in contact with almost all mechanical equipment, especially a polishing and rust removal machine that has been reformed many times. After checking the current circuit, I drew a new circuit diagram, which brought convenience for future maintenance work.

After May, I went to Z Project Department and started a new working life.

When I first arrived in Z, I caught up with the busiest installation period of bulk cargo general berth project 1# and 2# substation, and the owner ignored the site construction progress and asked the substation to be electrified in advance. So, Chief Engineer Z and Chief Technician Z worked out a detailed construction plan and schedule. In order to complete the owner's task, we appear on the construction site every day as soon as we arrive at working hours. Many times, it's time to get off work, and we are still busy in the substation. When there is no light source at the scene, we have installed power distribution cabinets in the weak light of flashlights and headlights for debugging the system during the day.

Preventive test and system debugging of electrical equipment are the most important links in substation installation, especially in the withstand voltage test of busbar and circuit breaker. Because of the unstable power supply, the power was suddenly cut off many times during the test, which caused permanent damage to the test equipment in the worst case. In order to complete the test, we contacted the manufacturer urgently and asked the equipment manufacturer to send spare equipment overnight to ensure the normal test. Finally, the test was successfully completed as scheduled. The installation of the secondary line of power system is a complicated process, and there are dozens of jumpers between only two cabinets. A slight error will bring great trouble to the later debugging. In order to avoid mistakes, I carefully studied the drawings, numbered the control lines in advance and printed out numbered tubes, and then carefully checked them against the drawings when crimping the terminals to avoid mistakes. The "two out of three" locking function of section I and section II high-voltage incoming cabinet cannot be realized. I checked the drawings again and again and carefully proofread every wire. After a day and a night of research, I finally found the reason: the factory drawings were wrong, and I felt particularly fulfilled at the moment when the factory technicians admitted their mistakes.

After more than a month of busy greening, both substations have been successfully electrified and put into use. After that, I began to work part-time in the budget of Zone Z, which was a challenge for me who had never been exposed to economic-related knowledge, but I accepted it.

Start part-time budget work at the end of June. First, I made a monthly test and a monthly report. Studied the form of measurement and monthly report made by predecessors, summed up the rules, and then made this month's measurement and monthly report of this project. Because the previous measurement was inconsistent with the actual progress of the project, and the reported quantities were quite different from those audited by the supervisor, I tried to check the quantities from the construction drawings and convince the supervisor with accurate data. After several months of revision, the schedule and measurement are finally unified. The owners of ordinary bulk cargo berths are very sensitive to the prices of main materials used in construction. All main materials need the owner's participation to confirm the price, and there are relatively many types of main materials in the installation project. When the project is nearing completion and waiting for settlement, all the main materials have not yet completed the quality and price recognition, and the owner's quality and price recognition scheme has been changed many times. It took more than three months to finalize the plan, from reporting the purchase unit price, to providing three inquiry sheets for price comparison, and then to providing purchase invoices for price determination.

Due to the special situation of Z Project Department at the installation site, I can always receive large or small projects. During this period, I independently completed a number of project budgets, including pipeline project of temporary storage yard of general bulk cargo berth, hydropower project of temporary storage yard of general wharf, hydropower project of offshore pipe network of maritime wharf, pipeline project of maritime wharf, temporary power supply project of multi-purpose berth, pipeline project of Z comprehensive logistics park, and work boat wharf project on the west side of Z harbor basin, etc. At the same time, the completion settlement and audit of many projects, such as the hydraulic structure project of the general bulk cargo berth project, the second phase project of the general bulk cargo berth project, the road yard project of the general bulk cargo berth and the Z comprehensive logistics park project, are also in progress.

While doing part-time budget work, I did not give up my job as a technician. I have also served as the presiding technician of several sub-projects such as the power supply pipeline of the second phase project of the general bulk berth, the power supply pipeline of the auxiliary construction area project of the general bulk berth, the communication pipeline and the temporary power supply project of the multi-purpose wharf. Due to the special situation of Z area, our technicians have to go to the site every day to master the construction progress and quality, work with the workers of each team, check the engineering quantity, do the completion data at night and arrange the construction progress for the next day.

The above is my summary of my work in the past year. Looking back on this year, as the most ordinary member of the grassroots, I spent my youth in this vast land of Z, exercised myself and enriched myself. More importantly, I successfully completed all the construction tasks assigned by the company and presented a congratulatory gift to the company. Looking forward to the new year, I will devote myself to the new working environment with a brand-new look and a hundred times spirit, work harder to improve my ability and contribute to the company in the new year.

Since I joined the work, I have been strict with myself in all aspects, working hard, being diligent and practical, and starting from the little things around me.

In order to further improve my skills and become a useful talent, I also actively study cultural knowledge in my spare time. In _ _ _ _, he obtained a junior college diploma in electrical automation from Zhengzhou University of Electric Power, and was admitted to Changsha University of Electric Power in the same year. In, I obeyed the arrangement of the leader of the Ministry of Electric Power Construction and came to the electrical site of Meng Yao Project Department to lay the grounding wire of Unit #6. Because the grounding wire needs to be laid by the civil engineering unit before backfilling, this requires our construction personnel to pay attention to the construction progress of the civil engineering unit at any time. So the first thing I do when I come to the construction site every day is to go to the construction site to see if I can meet the construction conditions, report to the team's master and relevant leaders in time, and be proactive so as not to delay the construction progress. At present, the electrical construction site has few personnel and heavy tasks. In order not to affect the construction progress of the whole project, as long as there is a need to climb up and down, I am young and strong, fasten my seat belt and take the lead. After a day's work, my back ached and my legs ached, but I didn't complain at all and worked hard.

Once, at 3 o'clock in the afternoon, I received a notice from the civil engineering unit that the 0-meter floor of the main factory building would be backfilled the next day, and there was still a lot of work to be done on the grounding wire. As the temporary person in charge, I feel that the task is quite arduous. After receiving the notice, I began to work with four other construction workers in the team. Together, we transported nearly 70 60x7 flat irons to the construction site. Seeing that it was getting dark and the welding task was heavy, I immediately picked up the welding handle and the welding cap and began to work. Although time is tight, both construction technology and quality are required. Until 23: 50 in the evening, the workload of more than 400 meters was finally completed with good quality and quantity, which was well received by the supervision unit and won honor for the project department and the construction site. With the acceleration of the construction progress of civil engineering units, the task of electrical field is getting heavier and heavier. Under the arrangement of the site leader, I began to install the foundation of the auxiliary electrical cabinet. The person in charge of the construction site held many meetings, emphasizing quality first, doing it well at one time, striving for high-quality projects, and actively responding to Party A's two innovations. I deeply understand the intention of the leader, start from myself, go deep into every work, overcome the difficulties of few people and heavy tasks, and strive for perfection in every process. Only in this way can we produce high-quality products. Through our joint efforts, the installation of electrical cabinet foundation has been recognized by the quality inspection department of the project department and fully affirmed by the supervision unit. As a young man in the Electric Power Construction Department of Henan No.1 Thermal Power Company, I deeply realize that I still have many shortcomings to improve.

In the increasingly fierce competition environment in the future, the quality of the century-old plan comes first, and success comes from details. Meng Yao Project Strives for Luban Award. In the future, we should be strict with ourselves with higher standards. No matter what you do, you must be conscientious, strive for perfection, ensure that all the work is completed at one time, meet the requirements of quality standards, start from me, insist on doing one thing, love one thing, and be good at one thing, so as to win glory for the power construction department and the company.