Thickness difference of thermal transfer paper

Thermal transfer printing is suitable for many industries and products, which can quickly transfer the required wood grain or marble grain to the surface of aluminum powder coating within 3-5 minutes and penetrate into the coating for 40-60 microns. Guangdong Yi 'an Printing Technology Industry Co., Ltd. has many years of working experience. The classification and thickness description of various thermal transfer films are introduced below.

1. Water-based ink-jet printing film: There are two kinds of transfer films: matte and bright, which can be printed on the coating surface of the film by a water-based ink-jet printer. Pigment ink is more suitable for printing ink (water-based ink can also be used for printing). The matte film has a matte effect on the surface after heat transfer, and the bright film has a bright effect after transfer, which is more suitable for transfer printing on flat materials such as metal plate, glass and ceramic tile.

Thickness: 5.5- 10.5 filament; Width: according to customer requirements, the maximum width is1.5m; Roll length: 30 meters; 50 meters; 100 meters or according to customer requirements; Inner diameter of paper tube: 76 mm (3 inches); Transfer temperature ≤ 180℃.

2. Oily ink-jet printing film: There are two kinds of transfer films: matte and bright. You can use an oily ink-jet printer (such as MIMAKI-JV3) to print on the coating surface of the film. The printing ink is solvent-based or weak solvent-based (you can also print with ink). The matte film has a matte effect after transfer, and the bright film has a bright effect after transfer. Transfer paper printed with thermal transfer film has essential waterproof function, and the transfer film is very thin.

Thickness 4- 10 line; Width: according to customer requirements, the maximum width is1.5m; Coil length: 100 m, 150 m or according to customer requirements; Inner diameter of paper tube: 76 mm (3 inches); Transfer temperature ≤ 120℃.

3. Waterproof film for water-based inkjet printing: This transfer film has two kinds of matte and bright, and can be printed on the coating surface of the film with a water-based inkjet printer. It is best to use pigment ink for printing ink (water-based ink can also be printed), and the surface of this thermal transfer film has waterproof function after transfer. After transfer printing, the surface of matt film presents matt effect, which is more suitable for leather transfer printing. Bright film shows bright effect after transfer printing, which is more suitable for transfer printing on plane materials such as metal plate, glass and ceramic tile.

Thickness: 5.5- 10.5 filament; Width: according to customer requirements, the maximum width is1.5m; Roll length: 30 meters; 50 meters; 100 meters or according to customer requirements; Inner diameter of paper tube: 76 mm (3 inches); Transfer temperature ≤ 180℃.

4. Release film (release film for transfer printing): There are two kinds of release films: matte and bright. Release film is used to print adhesive thermal transfer film, and ink can be printed on its coating surface (suitable for screen printing, gravure printing, relief printing, offset printing, etc. ). After drying, the printing ink layer can be peeled off from the coating surface to realize transfer printing. Subgloss release film is suitable for leather transfer and gravure printing.

Thickness: 2.5- 10 filament; Width: according to customer requirements, the maximum width is1.5m; Roll length: 50 meters; 100 meters or according to customer requirements; Inner diameter of paper tube: 76 mm (3 inches); Transfer temperature ≤ 180℃.