Summary of personal work in the laboratory

Sample personal work summary in the laboratory (generally 5 articles)

A period of work has come to an end inadvertently. Looking back on this period, our work ability and experience have improved. If you have grown up, you might as well sit down and write a summary of your work! What are the characteristics of a good work summary? Below is a sample personal work summary of the laboratory that I compiled (5 general articles). I hope it will be helpful to everyone.

Summary of personal work in the laboratory 1

In the past 20xx year, the laboratory has made overall arrangements under the leadership of the company, the cooperation of brother departments and construction site comrades, and the cooperation of the laboratory Thanks to the seriousness and responsibility of each employee in their work and their diligent efforts, we are about to end the year successfully.

After many inspections by the municipal and development zone quality supervision stations, the laboratory followed up in a timely manner according to the requirements of superiors, and under the auspices of the quality supervision station, it communicated and learned with other laboratories of the district's commercial mixing stations. , We have indeed improved a lot in terms of laboratory experience. Standard technical documents are updated in a timely manner, and the scientific quality of personnel has been trained for many times, which has better improved the overall level of our laboratory in production and practical operations.

As for the testers, the testers pay attention to their own studies, and under the guidance of the technical leaders of other laboratories in the district, in accordance with national and regional standards, they serve the laboratory with a scientific and rigorous attitude. In actual work, the testers must Conduct multi-batch and multi-faceted test inspections and irregular sampling inspections of raw materials; if there are large deviations in experimental data, promptly contact the raw material manufacturers and report them to the laboratory to control the quality of the concrete in a timely manner, solve the problems that arise, and make the concrete Avoid or reduce the chance of leaving the factory at the source. This year, testers tested more than 300 batches of cement, with a pass rate of 98%; tested more than 280 batches of fly ash, with a pass rate of 95%, etc. They avoided or greatly reduced the shipment of unqualified concrete from the source, laying the foundation for the laboratory's follow-up work. A solid foundation.

As for the quality inspector, due to the particularity of his position - it is the position closest to concrete in practice. This position connects the laboratory and the construction site, and has the most direct and realistic understanding of the material. opinion. Their reactions at the construction site provide valuable information for the laboratory to adjust for on-site construction. In view of the importance of personnel in special positions, the laboratory regularly organizes learning and exchanges in accordance with new national standards and management document requirements issued by regions to strengthen personnel's awareness of quality management. Regularly conduct experience exchanges in the laboratory, share their own experiences and insights, and make progress together. Through the exchange of theoretical learning and practical experience, laboratory work will be made more stable to safeguard actual production. Some measures have also been summarized for some actual production work:

1. When the construction site requires a small volume, try to minimize the slump of the concrete, of course, the premise is to ensure the construction on site;

p>

2. For large construction sites that require a large amount of square meters, quality inspection personnel must accompany the vehicle to the construction site in order to provide timely feedback on the site conditions and provide technical reference for adjustment to the on-site technology;

3 , Problems on the construction site can be solved in a timely and effective manner and fed back to the station.

4. If you encounter major weather changes, contact the construction site technical department in a timely manner to provide maintenance measures to better ensure the quality of the concrete.

During normal production, the laboratory actively contacts the construction party, exchanges opinions in a timely manner according to the characteristics of the construction party, and strengthens technical communication for better projects. This way, it is easier to better understand the needs of the construction site and facilitate Targeted adjustments have been made to the site to better improve our services.

However, there are also some shortcomings in actual production. Because the seasonal exchange of raw materials is unstable, the unstable state of the materials causes inconvenience to the construction. The laboratory is also actively looking for the reasons and actively communicating with the raw material suppliers. Technical contacts are actively adjusted, and everyone consults and studies based on the problems that arise to solve the problems to ensure the smooth implementation of subsequent production.

The laboratory has also accumulated a lot of experience from these problems in order to avoid or reduce the occurrence of similar incidents in subsequent production, which also indirectly improves the laboratory's own adaptability.

In the obvious seasonal transition stage, the laboratory actively communicates with the construction site construction parties, including water conservation and maintenance of concrete in spring and summer, antifreeze measures in winter, and maintenance precautions for large-volume concrete. It also provides With the great assistance of the comrades at the construction site, the project was completed together and the chance of problems was minimized.

In the past year, we have successfully completed the high-rise resettlement projects at Xuejia Island Nanbeizhuang and Yantaiqian construction sites, the Silver Beach Tourism Resort Project, the Jiaonan Villas Group, and part of the first phase of Jiaonan Poly Sea Roland under construction , Qingdao Liansheng International Building and other construction sites are in progress smoothly, Ammann Aluminum (Qingdao Branch) is about to be completed; and the Phoenix Coast Zone 1# project has been successfully launched.

The 20xx year is coming to an end. In this past year, we would like to thank the company leaders for their support of the laboratory work, the company's various brother departments for their mutual trust and understanding, and the local leaders and technical staff. Comrades’ support and understanding!

The end of a new year and the beginning of a new year. I hope that here we can profoundly summarize our past and better serve our future. Summary of personal work in the laboratory 2

In the blink of an eye, XX years have passed. This year is an important step in my life journey. Looking back on the past year, with the help of the leaders, the care and cooperation of colleagues, some achievements have been made in this area of ????the microbiology laboratory. In some aspects, it can be said that it has reached a new level. As a laboratory technician in the microbiology laboratory, it has also completed its tasks well in some aspects from thought to action, from theory to practice. I have worked hard to closely integrate the experiments and continuously improve my quality in many aspects. Here is a summary of this year’s laboratory work

1. Work quality achievements, benefits and contributions.

Make a personal work plan before starting the work, complete each work in a prioritized and timely manner, achieve the expected results, complete the work with quality and quantity, have high work efficiency, and learn at the same time I have learned a lot and exercised myself. Through unremitting efforts, my work level has made great progress, created a new situation in work, and made due contributions to the work of the laboratory center.

2. Ideological and political performance, moral quality and professional ethics.

Be able to conscientiously implement the party’s basic lines, principles and policies, use television, computers, newspapers, magazines and other media to pay attention to domestic and international situations, learn basic knowledge of the party and relevant political and ideological documents and books, and deeply understand the spirit of speeches, And use it as a program of thought and a guide to action; abide by laws and regulations, and study legal knowledge seriously; be dedicated to work, have a strong sense of responsibility and professionalism, proactively and conscientiously study professional knowledge, have a correct work attitude, and be serious and responsible.

3. Professional knowledge, work ability and specific work.

During my work in the laboratory, the laboratory work was delicate and trivial, but in order to do a good job, I was not afraid of trouble. I asked my leaders for advice, learned from my colleagues, explored my own practices, carefully studied relevant business knowledge, and constantly improved my skills. Theoretical level and comprehensive quality. He improved his work ability and became a skilled laboratory technician in specific work. He was able to complete laboratory work skillfully and satisfactorily, and was well received and praised by leading employees.

In this year, in line with the goal of "doing a better job", I developed a sense of innovation and actively and successfully completed the following tasks

(1) Humbly Study, be diligent in practical operations, deeply study national standards, integrate theory with practice, be able to skillfully operate all laboratory items and report the accuracy of the results.

(2) Assist the laboratory supervisor in the registration, reporting and distribution of various documents and materials, and organize the documents that were not specifically organized by category and put them into labeled documents In the folder, it provides great convenience for everyone to check the documents, and has received very good results

(3) Assist the laboratory supervisor to do the work related to laboratory certification.

(4) Complete other tasks assigned by leaders at all levels carefully, on time and efficiently.

At the same time, I also actively cooperate with other colleagues to do a good job, and can take over when other colleagues are busy.

4. Work attitude and diligence.

Love your own job, be able to treat every job correctly and seriously, devote yourself to work, serve everyone enthusiastically, strictly abide by labor disciplines, ensure attendance on time, have a high attendance rate, and have no absence from work. Make effective use of working time, stick to your position, and work overtime to complete the work on time to ensure that the work can be completed on time. In terms of style, we can abide by rules and disciplines, unite colleagues, be pragmatic, optimistic and progressive, and always maintain a rigorous and serious work attitude and meticulous work style, be diligent and hard-working, and bear no complaints. Carry forward the fine traditions of hardship, simplicity, thrift and hard work, and willingness to help others in life, and always strive to be an honest person, work diligently, and live a hard-working and simple life.

Summarizing the work of the year, although there has been certain progress and achievements, there are still deficiencies in some aspects. For example, there are not many creative work ideas, and individual work is not perfect enough, which needs to be improved in future work. In the future at the laboratory center, I will conscientiously study various policies and regulations, and strive to bring ideological awareness and work efficiency to a new level. This site is now under construction. A new starting point means new opportunities and new challenges. We can expect that The work will be more arduous and demanding, and the knowledge required will be higher and broader. To this end, I will work harder, study harder, strive to improve cultural quality and various work skills, and make greater contributions to the development of the center. You must work hard to open up a new situation in your work! Summary of personal work in the laboratory 3

Looking back on the past year, with the great help and support of my colleagues in the laboratory, I used the knowledge I have mastered to study the business, set high standards for myself, and work hard in my own work. In his position, he performed his duties conscientiously and completed his job well. I will now summarize my work this year from the following aspects

1. Re-learn and constantly improve myself

From the moment the bell rang in 20xx, I I have deeply felt that the burden of work in the new year has been relentlessly pressing on me. The conflict between the customer's requirements on product indicators and the existing knowledge of our laboratory personnel has invisibly tightened the pressure for the laboratory personnel. Root string! The already tense nerves were severely affected again!

In order to complete the work tasks with high quality and quantity, I can only re-learn and deepen my understanding of the relevant knowledge of laboratory tests based on the past. Make it more systematic and comprehensive, raising the professional level of laboratory testing to a new starting point. With a new starting point, the next step is how to make it work in practice. Under the premise of serious shortage of personnel and increasing workload, there are only two solutions to avoid being overwhelmed. One is to strengthen on-the-job training. , increase one's own proficiency in all aspects of the experiment, thereby improving work efficiency. First, strengthen unity and cooperation among internal personnel, cooperate closely with each other, and fully tap the collective potential.

In daily work, we must face reality. Not only can we bury our heads and work selflessly at work, but we must also be able to check every detail of the work when we look back. , summarize and analyze the work experience, from how to save time, how to improve efficiency, try to make the work as programmed, systematic, organized and streamlined as possible!

"The edge of a sword comes from sharpening, and the fragrance of plum blossoms comes from the bitter cold." Opportunities always belong to those who are prepared. It is precisely because of my hard work over the past six months that I have achieved such impressive results. However, the achievement of these achievements is inseparable from the training, support and encouragement of the leaders, teachers and comrades of the company and laboratory. I would like to express my heartfelt thanks to you!

No gold is pure, and no man is perfect.

While affirming my achievements, I am also clearly aware that I have some shortcomings: due to the difference between my major and the industry I am engaged in, I cannot say that I am 100% aware of all aspects of product performance indicators, but I have confidence and believe that hard work can make up for weakness. With my youth, my ability to accept new things and my quick thinking, with the help and care of my comrades in my future work, I will overcome my shortcomings and do a better job. good.

2. Strengthen safety education and improve safety awareness

As the saying goes: Safety is higher than life, and responsibility is heavier than Mount Tai. Some of the large-scale analytical instruments in the laboratory require the use of high-pressure cylinders. High-pressure cylinders must be well managed. The storage of high-pressure cylinders such as oxygen, nitrogen, and hydrogen must meet the requirements of experimental environmental conditions. Establish certain procedures and systems for the storage and distribution of flammable, explosive and toxic substances, and be familiar with accident handling methods.

3. Set your position, be a supporting role, and be a good consultant

First of all, you must do your duty to the work in your office, provide reasonable suggestions and suggestions to the leader, and help the leader make correct decisions. decision making. Secondly, we must have the awareness of overall planning and be a good consultant and assistant so that the decisions made are in line with the wishes of the majority of people. When leaders go out, they must stick to their posts, properly handle internal affairs, and be able to stand alone and solve various problems smoothly. All in all, we must fulfill our duties without overstepping our authority, help without causing trouble, and make up for the situation without tearing it apart.

4. Unite comrades, learn with humility, and develop collaboratively

The weather is not as good as the right place, and the right place is not as good as the people. Unity is strength. Only through unity can we work together to form a synergy. Assist leaders to broaden and clear democratic channels, discuss with everyone when encountering problems, listen to comrades' opinions humbly and sincerely, be strict with oneself, treat others sincerely, respect comrades, care for comrades, put yourself in the shoes of comrades, and strive to create a relaxed, harmonious and pleasant working environment. Listening to both is enlightening, trusting is concealing, do a good job in coordination between leaders and comrades, and comrades and comrades, exchange ideas and feelings with everyone more, be everyone's close friend, and strive to create a working atmosphere of mutual trust, mutual help, and comfort. .

5. Make full use of the advantages of computers, be enterprising and innovative

Society is progressing and science and technology are developing. Since I have certain advanced computer theory, I can use computers to search for technical information and conduct technical exchanges among peers. In this way, I walked into this year from being infinitely busy, and today, when new work and new challenges come to me, I just want to say, come on, I have grown up from work! Personal work summary of the laboratory 4

20xx is an unusual year. With the care and attention of the company leaders and the support and cooperation of all laboratory employees, xx laboratory staff have strengthened their Study and exercise, conscientiously perform their duties, comprehensively improve their ideological understanding, work skills and overall quality, and successfully complete various goals and tasks. Although we have experienced many difficulties at work, each time is a good exercise for the entire laboratory staff, and each time is a sign of progress and maturity.

The main responsibilities of the laboratory are factory loading, inspection of incoming raw materials, and testing of calcium carbide before leaving the factory. Everyone takes their own responsibilities and fully and completely guarantees the quality of all aspects of the company's calcium carbide production, calcium carbide storage, and calcium carbide delivery. It controls every threshold of the company's quality. All employees in the office are scanning, running, and working hard all the time, conscientiously fulfilling their job responsibilities, striving to promote the development of various tasks, comprehensively saving energy and reducing consumption, improving economic benefits, and achieving greater results. Good job performance. This year’s work is summarized as follows:

1. Strengthen production quality management and do a good job in hourly monitoring.

1. Quality control of calcium carbide production is the first priority.

The quality of calcium carbide is the source of life of the company. The quality of calcium carbide is directly related to the efficiency and reputation of the unit. We strictly control the quality to ensure that the hourly inspection data is accurate. Therefore, the laboratory adheres to the policy of quality first. When there is a conflict between production tasks and inspection quality, the laboratory insists on quality first.

When there are fluctuations in the quality control of calcium carbide inspection, the quality staff always take the trouble to add standard samples for analysis, take samples for analysis, and also think together with the production department. Inspection quality is the life of the laboratory, so all work in the laboratory is carried out around improving the accuracy of laboratory inspections. We have made great efforts in quality management. Communicate with each employee about problems that often arise at work, allowing everyone to accumulate certain experience and have the ability to deal with common problems.

2. Carefully investigate hidden dangers and actively combat the "three violations" to lay a solid foundation for safe production.

In XX, as the company promoted production safety, energy conservation and efficiency improvement, our office conscientiously implemented the spirit of the company and calcium carbide factory documents, and no production safety accidents occurred during the production process. In order to save energy, reduce emissions and reduce costs, starting from a small matter of one kilowatt hour of electricity and one drop of water, employees are strictly required to return the remaining samples that have been separated after inspection to the material yard, and return the expired calcium carbide samples retained by the inspection to the calcium carbide pot. Within the company, everyone’s efforts have been spent on saving energy for the company.

2. Implement the system conscientiously to ensure the authenticity and reliability of the data

If the system is not implemented, it is zero, if there is inspection and no assessment, it is zero. The system is to bring better completion of various tasks. in accordance with. Therefore, after the various systems and work instructions were revised, I required all positions to strictly abide by them.

First of all, do a good job in sampling. In the work instructions, the collection of raw materials and hot samples was standardized to ensure the authenticity of the analysis samples; secondly, the laboratory instruments were calibrated once a year to ensure the accuracy of each measurement and detection device; again, work carefully Good sampling comparison work and incorporating it into the personal assessment system have played a certain role in constraining the laboratory technicians, which has significantly enhanced the laboratory technicians' sense of responsibility and made their work attitude more correct.

During the quality assessment, the quality work shall be assessed strictly in accordance with the company's plan, and the company's external contracts shall be strictly implemented to ensure that the company's interests are not lost.

3. Strengthen safety education and improve safety awareness

Safety first, prevention first, this is the safety principle followed by the company. The laboratory does not relax about safety and explores more carefully. A safe way, make safety practical and detailed. As the saying goes: Safety is higher than life, and responsibility is heavier than Mount Tai.

With the coming of winter, the road surface for sampling is slippery. We draw lessons from the safety accidents that occurred in other workshops to conduct whole-shift warning education for all employees in the room, find out and analyze the causes of the accidents, and how to improve self-prevention and protection measures, which will be of benefit to this room. Establish necessary procedures and systems for the measurement and analysis instruments of safety hazards and the storage and distribution of flammable, explosive and toxic substances. Department employees resolutely adhere to the four no-harm principles and put safety first at all times.

4. Position yourself correctly, be a good supporting role, and be a good consultant

Department employees must first perform their duties and responsibilities for the work in their own offices, communicate with each other, and make reasonable recommendations and suggestions. Secondly, many key employees have the awareness of overall planning and act as good consultants and assistants. The mistakes that employees make at work are linked to the established assessments, and the decisions they make are in line with the wishes of most people.

In short, each of them can fulfill their duties without overstepping their authority, help without causing trouble, and make up for the situation without destroying it.

5. Unite comrades, learn with humility, and develop collaboratively

The weather is not as good as the right place, and the right place is not as good as the people. Unity is strength. Only with unity can there be harmony and cohesion, and work can form a synergy. xx Laboratory carefully carries out employee business training and corporate cultural concept promotion, which improves employees' professional quality and sense of belonging and identification with the company. All employees have essence, energy and spirit. Maybe it is this essence, energy and spirit. They all pay great attention to the harmonious and harmonious relationship between colleagues. They always discuss things together. Leaders listen to comrades' opinions sincerely, are strict with themselves, treat others sincerely, respect comrades, care about comrades, put themselves in the shoes of comrades, and work hard. Create a relaxed, harmonious and pleasant working environment.

Listening to both sides will make you aware, believing only to the darkest side, doing a good job in coordination between leaders and comrades, comrades and comrades, exchanging thoughts and feelings with everyone more, being everyone's close friend, and striving to create a mutual trust, mutual trust, and mutual trust. The helpful and comfortable working atmosphere promotes the coordination and efficient development of work.

6. Service dedication, pioneering innovation, and striving for the first class

As a laboratory leader, I always believe that being a leader means having to endure hardship before enjoyment, and only dedication , do not ask for anything, be fair and honest, and lead by example. No matter it is the scorching sun, the bleak autumn wind, or the cold weather, no matter what time, you can see figures and hear voices on the production line and under the carbide shed.

Laboratory leaders take the lead in learning, taking the lead in learning, and learning together. Use your own personality charm to set an example. Precisely because he sets an example and is willing to contribute. Therefore, a good management atmosphere is formed in which the discipline is enough to convince people, the tolerance is enough to win people, and the example is enough to lead people.

Therefore, the work is carried out very smoothly, and the laboratory has formed a good situation of being proactive and trying to catch up with others. We are proud of our dedication to service, pioneering and innovation, and striving for first-class excellence. We continue to carry forward the spirit of not being afraid of hardship and tiredness, focusing on quality, fighting high temperatures, and ensuring safety. We have completed work tasks on time and created considerable achievements.

In 20xx, there was a large backlog of calcium carbide and severe weathering. In order to reduce the losses caused by weathering of calcium carbide, the laboratory pays attention to the reasonable matching and loading of weathered calcium carbide powder, and completes the matching of pulverized calcium carbide powder throughout the year, creating huge profits for the company. Summary of personal work in the laboratory 5

My name is xx, and I am a laboratory technician in xx laboratory. During my work in 20xx, I used the professional knowledge I learned to do a good job in laboratory work and strictly required myself. Do everything well, live up to the expectations of my leaders, and complete my job with due diligence.

1. Always strengthen your own learning and strengthen your personal potential

If you want to make continuous progress and achieve results, you need to continue to learn. As a laboratory technician, I know that this is an easy truth. In order to improve my laboratory professional level to a new starting point. There has been a qualitative change. I have mainly strengthened the following two points:

First, strengthen on-the-job training and increase my proficiency in all aspects of the experiment, thereby improving work efficiency. Second, strengthen the communication between internal personnel. Unite and cooperate closely with each other to fully tap the potential of the masses. In our daily work, we must face the reality. Not only can we bury our heads and work selflessly at work, but we must also be able to check every detail of the work and summarize and analyze the work experience when we look back. , from how to save time and how to improve efficiency, try to make the work as programmed, systematic, organized and streamlined as possible!

2. Improve environmental awareness and safety awareness

Safety awareness and environmental awareness are very important in laboratory work. Some instruments and reagents in the laboratory are flammable and explosive dangerous goods. , the storage of many reagents must meet the requirements of experimental environmental conditions. I strictly store reagents in accordance with the storage of flammable, explosive and toxic substances, and am familiar with accident handling methods to prevent safety accidents from happening. Environmental protection is also very important. Each chemical reagent and what needs to be processed must be classified and processed in a centralized manner. Do not dump it randomly, which has an impact on the environment. Do not dump sewage stained with reagents randomly. At the same time, pay attention to the hygiene and hygiene of the laboratory. All kinds of experimental equipment are always neatly arranged and neatly arranged.

3. Set your position, be a supporting role, and be a good consultant

First of all, you must do your duty to the work of the undergraduate department, provide reasonable recommendations and suggestions to the leaders, and help the leaders make correct decisions decision making. Secondly, we must have the awareness of overall planning and be a good consultant and assistant so that the decisions made are in line with the wishes of the majority of people. Regardless of whether the leader is there, you must stick to your post, do a good job in laboratory work, and solve various problems smoothly.

4. Do all the work carefully

The laboratory work is delicate and trivial, and I often encounter new and different problems, so in order to do a good job, I am not afraid of trouble and observe the experiments carefully. Phenomenon, ask leaders for advice, learn from colleagues, explore and practice by yourself, study relevant business knowledge seriously, and constantly improve your theory and comprehensive quality. ;