What are the steps for painting Zaozhuang high-end matte wall paint?

?When there are problems with the walls of the house, or the walls of the old house need to be repaired, it is necessary to paint the old walls. Painting doesn’t have to be a difficult task. So, what are the correct steps for Zaozhuang high-end matte wall paint?

? Zaozhuang high-grade matte wall paint step 1: inspection and cleaning work

Before the mural is officially launched, the specific condition of the wall must first be accurately assessed and the wall must be observed. Physical damage, and then determine the construction method based on the degree of damage. Common problems on walls are: dust, cracking, peeling, etc. When these problems occur, the base layer of the wall must be treated first, and the surface of the damaged old wall must be removed, stains on the wall surface, and eradication after spawning. Dust and floating floors must also be cleaned. Step 2 of Zaozhuang high-end matte wall paint painting: Apply interface agent

If the adhesion of gypsum mortar to the wall is insufficient, the surface of the wall will be prone to draining and peeling. At this time, the interface agent must be re-coated to give it strong adhesion to the wall surface. Not only does it improve wall adhesion, it is also waterproof thanks to its high water resistance. During the specific operation, special attention must be paid to the correct operation method, otherwise, incorrect operation will also cause damage to the wall.

Step 3 of Zaozhuang high-grade matte wall paint painting: scrape off the putty and make it smooth

In order to make the wall smooth and flat, it is an important part of leveling the putty. And this step is the general decoration of the wall, emphasizing general consistency. The standard error is 5mm. In order to make good putty, the choice of putty is key. Therefore, when you buy putty, try to choose putty with high fineness and hard texture. In order to obtain a smooth effect and a more even and fine texture, the putty usually needs to be made three times, and the total thickness cannot exceed 3mm.

Zaozhuang Premium Matt Wall Paint Painting Step 4: Sanding and Repair

Once the putty is completed, the wall will inevitably have irregularities. At this time, it is necessary to sand the wall with sandpaper. Depending on the hardness of the putty texture, pay attention to the softness of the sandpaper. Corresponding selection can have better grinding effect.

Zaozhuang high-end matte wall paint painting step 5: paint.

The paint on the wall is divided into two parts, one is for the base and the other is for the surface. But many people have a misunderstanding, that is, it doesn't matter if you don't apply primer. This is wrong. Since the primer has the function of sealing against alkali and protecting the topcoat, the primer must not only be brushed, but also brushed carefully. Primer should usually be applied three times. Brushing on the finish coat is done in much the same way as applying primer. The biggest difference is that the finishing layer only needs to be brushed twice.

The above are all the steps for correctly painting Zaozhuang high-end matte wall paint. I hope I can help you.

Tubatu provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design plans" for free online, as well as decoration avoidance strategies! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiareamp;wb, you can get it for free~