How to choose the size of sliding door in shower room? What are the installation skills of sliding door in shower room?

Nowadays, most people's requirements for quality of life are increasing day by day, and they want to enjoy the pleasure of taking a bath more and more. Therefore, in order to enjoy it better, many people will install a shower room in the bathroom to separate dry from wet, keep warm in cold weather and dress beautifully. In order to make better use of the shower room, many people will choose to install a sliding door in it, which will make it more convenient to get in and out. The following small series will give you a brief introduction on how to choose the size of the sliding door in the shower room. I hope it's good for you.

How to choose the size of sliding door in shower room

1, tempered glass

This texture is frequently used at home, and its thickness is about 4 ~10 mm. The specific thickness should be selected according to the actual situation at home. However, the thicker the tempered glass, the safer it is. If it is too thick, it will not only increase the cost, but also overload the pulleys and hardware, increase the probability of problems and shorten the service life.

2, size selection

The choice of size should also be based on the actual situation of the individual's home. First of all, ensure that the user's body can rotate freely and will not always touch the glass. The general size is 900 * 900 mm, of course, if a family wants to enjoy a spacious shower environment, they can continue to expand. There is no fixed value for the size of the sliding door, but it is best not to be less than 800 * 800 mm

3. Prevent self-explosion

As we all know, in order to prevent colds when taking a bath in winter, many people will put a heater or a yuba in the bathroom, so that they can enjoy the bath time more comfortably. However, it must be noted that it is best not to put it in the shower room near the sliding door to prevent moisture. In addition, if the shower room is large enough, don't put it in front of the shower head and glass, otherwise it will not only fail to achieve the heating effect, but also easily lead to product aging or self-explosion.

What are the installation skills of sliding door in shower room?

1. Install sliding door wheel.

Generally speaking, wheel holes will be reserved under the sliding door, because you need to rely on pulleys when moving. First put two wheels above the door frame and put them in the corresponding position, and then debug and install the wheels below.

Step 2 Repair the sliding door

After the door frame is installed in place, it needs to be fixed, but it doesn't mean that it can't move at all, but it can't be separated from the door frame. In addition, the fixing method is the same. Tighten the joint with pliers and screwdriver.

3. Debugging the sliding door

After the sliding door is put away, don't forget the debugging link. At this time, you can try to push it to see if the door is open or closed. There is usually no phenomenon of narrowing the gap. If so, measures need to be taken to re-debug.

4. Install the sliding door handle

Of course, the handle must be stored in the sliding door, otherwise it is very inconvenient to use. First separate the handle, then aim at the hole in the glass and fix it with screws, so that the sliding door can be installed.