Is Huawei ws832 router Gigabit?

Huawei ws832 router is Gigabit, which supports wireless 2.4G and 5G dual-band concurrency, with the highest rates of 300Mbps and 867Mbps respectively, and can provide users with more than Gigabit WiFi.

Huawei WS832 adopts independent HiSilicon dual-core 1G chip, which supports more terminals to be connected at the same time, and the WiFi performance is improved by up to 30%. In addition, Huawei's routing core handles WiFi separately, supplemented by WiFi acceleration engine, which is more stable.

Huawei WS832 is equipped with four high-performance antennas with a gain of 5dBi, two 2.4G and two 5G. The antenna layout was made by Huawei wireless engineers, and it was the best after N rounds of testing.

Extended data:

principle

Devices in the network communicate with each other mainly through their IP addresses, and routers can only forward data according to specific IP addresses. An IP address consists of a network address and a host address. In the Internet, subnet masks are used to determine network addresses and host addresses.

The subnet mask is 32 bits like the IP address, and they are in one-to-one correspondence. "1" in the subnet mask corresponds to the network address in the IP address, and "0" corresponds to the host address, so the network address and the host address constitute a complete IP address. In the same network, the IP addresses of network addresses must be the same.

Communication between computers can only be conducted between IP addresses with the same network address. If you want to communicate with computers in other network segments, you must forward them through the router. IP addresses of different network addresses cannot communicate directly, even if the distance is very close.

Multiple ports of a router can be connected to multiple network segments, and the network address of the IP address of each port must be consistent with the network address of the connected network segment. Different ports have different network addresses and corresponding network segments, so the host of each network segment can send data to the router through the IP address of its own network segment. ?

Baidu encyclopedia-Huawei ws832