What are the use and maintenance skills of woodworking cutter milling cutter?

In order to achieve the purpose you require, please try to use short-edged tools. Too long cutting edge or too long cutter body will cause vibration and deviation during machining, which will lead to tool damage and affect machining quality. We recommend using a tool with a larger handle diameter.

Second, the operation

1, notes

(1), the woodworking milling cutter is specially designed for portable and desktop woodworking engraving machines, and cannot be used on machines such as electric drills and drilling machines.

(2) The tool can be used to process smooth surfaces of hardwood, cork, synthetic board and other wood, but it is necessary to avoid processing metal materials such as copper and iron and non-wood materials such as sand and stone.

(3) Be sure to use a jacket with proper size, because the jacket with serious wear, insufficient roundness and tapered inner hole can't provide enough clamping force, which will lead to vibration, broken handle and flying off.

(4) Never think that a new coat must be safe and reliable. When the tool is clamped, it is found that there are uneven contact marks or grooves on the handle, which indicates that the inner hole of the jacket has slipped and deformed. At this time, the coat should be replaced immediately to avoid accidents.

(5) After the tool is clamped, if it is found that the tool is jumping during work, stop the machine immediately and repeat the clamping several times to make the handle fully contact with the jacket before working.

(6) The contact between the handle and the jacket should be good. The handle must be fully inserted into the sheath and tightened to provide sufficient clamping force for the tool. Only a small part can not be inserted into the jacket, otherwise it will easily cause the handle to break and the tool to be damaged.

(7) Use appropriate eye and ear protection devices during operation.

(8), body, clothes and other sundry can't close to the work tools.

2, choose the appropriate cutting amount

(1), the cutting speed of different wood is very important for the service life of tools and the processing quality of wood parts. Reasonable cutting parameters make machining faster, better and safer.

(2) Generally, high-speed cutting can be used for wood, and low-speed cutting is best for hard wood and tools with large blade diameter to slow down the forward speed. The advancing speed should be even, neither fast nor slow, but steady. If you stay in the cutting process, it will burn out the tool and greatly reduce the service life of the tool.

(3) Cutting speed depends on the following three aspects: 1, wood material: 2, types and specifications of tools: 3, equipment.

(4) If a large-diameter cutter is used, the machining can be completed by feeding several times, which can improve the service life of the cutter and make the operation safer. Large-diameter cutting machines usually use high-quality desktop equipment.

Third, the maintenance of tools

1, maintenance of cutter body

(1), keep the cutter clean, remove the dirt such as resin and sawdust from the wood after use, and clean the cutter with standard industrial solvent.

(2) Applying a small amount of engine oil can prevent the tool surface from rusting, and clean all stains on the tool handle to prevent slipping during use.

(3) Don't polish the tool and change the shape of the tool without authorization, because each polishing process requires professional polishing equipment and professional polishing skills, otherwise it will easily cause the edge to break and cause accidents.

2, bearing maintenance

(1), the bearing cannot be cleaned with solvents such as diesel oil and kerosene, otherwise the grease in the bearing will be destroyed. Dust and sawdust can be removed with a dust gun.

(2) Due to the high-speed operation of the bearing, it is very important to replenish lubricating oil in time for the service life of the bearing, so a little lubricating oil should be added after working for 2-3 hours.

(3) In the process of processing wood, the resin and glue on the wood become fluid due to heating, which will affect the processing quality and reduce the service life of the bearing. In this case, before processing, clean the resin stuck on the bearing and stick it.

(4) Bearings that cannot rotate smoothly should be replaced immediately, and nuts, screws and gaskets must be replaced if damaged.