Selection method of Shunde floor wax in Geely access control system

1, according to the type of floor wax, you should choose from the category according to the use. Floor wax can be divided into pressure canned floor wax, hand-sprayed bottled floor wax, canned solid floor wax, bottled liquid floor wax and high-grade wood floor wax. Most floor wax does not need to be diluted. Pressure canned floor wax can be sprayed directly on the floor or on a dry towel, and then wiped clean with a towel.

Spray the bottle of floor wax by hand, spray it directly on the floor, and then mop the floor with a flat plate after it dries.

Canned solid floor wax needs to be sponged on the floor first, and then polished with a towel after it dries.

Bottled liquid floor wax needs to be sponged on the floor first, and then polished with a towel after drying.

High-grade wood floor wax, because its composition mainly comes from natural beeswax, needs to be coated on the floor with a sponge first, and then polished with a towel after drying.

2. According to the characteristics, the pressure canned floor wax is selected, which is characterized by fast and uniform spraying, obvious effect and very bright.

Because of the huge amount (only about 10 square meter can be used per can), it is not suitable for floor.

Hand-sprayed bottle floor wax is characterized by being relatively fast, paying attention to uniformity and general brightness when spraying, and the floor surface is slippery after use.

Because of the large dosage, it is not safe enough (the surface is slippery), and it is only suitable for daily cleaning.

The canned solid floor wax is characterized by forming a wax film.

It has the function of protecting the floor, and the floor surface is sticky and slippery after use. Because it needs special polishing, it is only suitable for a few people to use the floor for a long time in order to pursue the traditional floor effect.

Not suitable for the new floor.