There is a small hole in the glass fish tank. What glue can be used to stick together without water leakage?

There is a small hole in the glass fish tank. What glue can be used to stick together without water leakage? Because water is to be filled, it is best to bond the glass fish tank with professional glass adhesive.

(1) There are many kinds of glass adhesives, such as silicone adhesives and polyurethane adhesives. Silicone glue is generally used, which can be directly bonded. Of course, it is best to brush your hair with a fine brush. Before bonding, the glass should be kept clean and free of moisture. It is best to wait until the glue is completely dry before injecting water (usually about a week).

(2) At the same time, according to the size of the fish tank, if it is below 1 m, it is almost the same with ordinary acidic glass glue, which is quick-drying and has strong adhesion. If the large fish tank is going to use expensive glass glue, it is best to ask the aquarium people to help, because if you don't do it well, it will be very troublesome to leak water.

I broke a hole in the glass fish tank wall. What glue should I use to repair it? How can I make it up? Fish tank glue! Very special. Better than glass glue.

Plastic box is a kind of synthetic polymer, also known as macromolecule or polymer, also known as plastic or resin, which can change its shape freely. It is a substance polymerized by monomer raw materials through synthesis or condensation reaction, and consists of synthetic resin, filler, plasticizer, stabilizer, lubricant, pigment and other additives.

Adhesion of PP (polypropylene) plastics;

Small area PP plastic can be bonded with KEDDAK (KD-822PP special adhesive). KD-822PP special adhesive specializes in fast and perfect bonding of small area PP (polypropylene) and PP (polypropylene) with all different materials such as plastic, metal, wood, ceramics, stone and rubber.

Large-area PP plastic bonding can be done with giant G-922PP polypropylene plastic adhesive, which is a one-component adhesive with special resin. Odorless, nontoxic, and can be constructed at room temperature. Used to bond PP and PP, PP and ABS, PP and PVC, metal, ABS, GP, AS and other hard adhesives. After bonding, it can be naturally cured at room temperature, and the positioning time is faster.

Adhesion of PE (polyethylene) plastics;

Small-area PE plastics can be bonded with KEDDAK (KD-8 1 1PE special adhesive). KD-81PE special adhesive is specially designed for small-area PE (polyethylene) and PE (polyethylene) materials, as well as PE (polyethylene) and all plastics, metals and PE.

A large area of PE plastic can be bonded with giant arrow G-9 1 1PE polyethylene plastic glue. G-91/PE glue is a one-component glue, which is made of special resin. Odorless, nontoxic, and can be constructed at room temperature. Used to bond PE and PE, PE and ABS, PE and PVC, metal, ABS, GP, AS and other hard adhesives. After bonding, it can be naturally cured at room temperature, and the positioning time is faster.

Adhesion of ABS plastics;

Giant Arrow G-977 ABS special adhesive is a one-component solvent-based adhesive with vinyl polymer as the main body. It has the advantages of convenient use, quick positioning, high bonding strength and non-toxic cured product. Glue, like ABS engineering plastics, is waterproof, heat resistant, cold resistant, oil resistant and corrosion resistant. It is the best glue for bonding ABS, acrylic, PC, PS, GP, AS and other engineering hard plastics.

Bonding of polystyrene plastics;

Giant Arrow G-955PS adhesive is a one-component adhesive synthesized by environmentally friendly solvent and resin, which is suitable for hard plastic materials such as ABS, PS, HIPS, PC, GP and AS. Odorless, nontoxic, and can be constructed at room temperature.

Bonding of polycarbonate plastics;

Giant Arrow G-933PC plastic adhesive is used to bond PC to PC, ABS, acrylic to acrylic, PS to PS, HIPS, etc. After bonding, it can naturally cure at room temperature. This product has the characteristics of quick positioning time, easy operation, non-brittleness, non-whitening, non-dissolution, non-melting, waterproof, anti-corrosion and anti-rust.

Bonding of nylon plastics;

Giant Arrow G-966 nylon (PA) special adhesive is a one-component nylon (PA) special adhesive with vinyl polymer as the main body. Easy to use, single component, high strength, high efficiency, room temperature curing or heating curing, etc. It has excellent waterproof, heat resistance, cold resistance, oil resistance, corrosion resistance and no whitening effect; Suitable for bonding nylon materials such as nylon 6, 66, 10 10,10/3;

Adhesion of PVC (polyvinyl chloride) plastics;

Jujian jukam g-901a special adhesive for PVC plastics is a kind of special adhesive for rigid PVC plastics. It is synthesized with special polymer materials as the main raw materials and with the speed-increasing system, and adopts advanced production technology to solve the problem of difficult adhesion of rigid PVC materials.

Adhesion of EPE (pearl cotton) plastics;

Giant Arrow G-370 Pearl Cotton (EPE) adhesive is a new one-component adhesive product with polymer as the main body. It is specially developed for EPE to solve the problem of difficult adhesion of EPE materials. It is mostly used in EPE foaming -EPE foaming, PP, PVC, sponge, foam, wood, polystyrene and other materials, and has obvious bonding effect on soft materials such as pearl cotton and EVA.

Adhesion of EPS (poly-long) plastics;

Jujian JUKAM G-900 foam board adhesive is an acrylic synthetic resin polymer, which is mainly used for the mutual bonding of foam adhesive and the bonding of foam adhesive with paper, metal and plastic. It has the advantages of no corrosive foam, high viscosity, stable performance, pollution resistance, good weather resistance, environmental protection, no adverse effects on plastics and iron wires, elasticity after drying, high transparency and wide application range.

Adhesion of PMMA (acrylic acid) plastics;

Kyojian G-257 acrylic PMMA special adhesive combines the advantages of solvent-based adhesive and resin-based adhesive, abandons their respective disadvantages, and achieves ideal bonding effects such as fast bonding speed (positioning within a few seconds), high strength, no foaming, no whitening, no yellowing, no cracking and excellent transparency.

Bonding of PET (poly (terephthalic acid)) plastics;

Giant arrow G-902A, a special adhesive for PET, has a single component. It only needs a thin layer of adhesive, without adding new catalyst or heating or pressurizing adhesive, it can react with the material in a molten chemical way to achieve the best bonding effect.

Adhesion of silicone rubber to silicone rubber;

JUKAM G-988A special adhesive for soft silicone rubber is specially developed for bonding silicone rubber with silicone rubber, silicone rubber with cloth, and silicone rubber with similar soft materials (TPU, TPR). It is widely used for bonding various silicone products such as silicone sealing rings, silicone rubber strips, silicone bracelets, silicone signs and fabrics. Soft, elastic and sticky after curing! It is waterproof, moisture-proof, oil-resistant, aging-resistant, vibration-resistant and insulating. Overcomes the shortcomings of brittleness, whiteness and heavy smell of traditional silicone adhesive after bonding. The glue is transparent, nontoxic, tasteless and free of * * *!

Bonding of silica gel with plastic, metal, glass and other materials;

JUKAM G-988 silicone metal plastic adhesive is a kind of silicone rubber, which is used to bond silicone with ABS, silicone with PS, silicone with PC, silicone with PMMA, silicone with PVC, silicone with TPU, silicone with TPR and silicone with other plastics. Adhesives such as silica gel adhered to aluminum, stainless steel, iron, aluminum, zinc alloy, copper and wood, ceramics and glass are cured by contacting water molecules on the surface of an adhered or sealed object or in air.

The answer is not easy, please accept it if you are satisfied.

Which brand of glue is good for sticking glass? I want to stick a glass fish tank 502, and it would be a ghost to stick a fish tank. ...

Generally, acidic silica gel is used, and it is best to buy one for aquarium. Common brands are Lushi, Luchang, Wacker, Giraffe and Gu Yong Glass Glue.

What's the best way to stick a glass fish tank? The following is for reference.

General viscous fish tanks generally use special glass glue for acidic fish tanks.

This kind of glass glue is prepared for the long-term soaking demand of fish tanks.

The life of the fish tank can be relatively long without water leakage.

You can usually buy it in aquarium stores or online stores.

When a glass fish tank knocks off a leg, what can be used to stick a small bag of fish tank glue 1 yuan Qian 1? Fish shops sell them. Be sure to ask the seller, because the target is so small that you can't see it yourself.

What kind of glue can be used to stick pet materials? It depends on whether your pet is made of plate or film. If it is a membrane type, Viagra adhesive can be used, which can have ideal effect.

What kind of glue can be used to stick the toilet reservoir without water leakage when it is broken? 2: 1 glue or special glue for sewer pipes, but the reservoir must be thoroughly dried before treatment.

There is a small hole in the glass on the fourth floor. Ask the glass shop to measure and replace the glass. Glue is not safe. Leaking rain is a trivial matter. If it's all broken, it'll hurt people.

What kind of glue is used to stick the toilet? Glass glue can be waterproof as long as it is acidic. Use transparent or China white, depending on which position is missing. Dry the water first and stop using it for one night. Wipe it again with a roll of paper, and after confirming that there is no water or oil, apply glass glue and smooth it with your fingers. If the room temperature is 25 degrees Celsius, wait 8 hours. If the humidity is below 25, it can be used within 24 hours.