What should I pay attention to in screen printing and pad printing?

Matters needing attention in screen printing and pad printing processing

1. When coating the photosensitive adhesive on the screen, it is necessary to make the photosensitive adhesive on the back of the screen thicker, so that when screen printing, the screen-printed product looks three-dimensional, and the edges of fonts or patterns are smooth, and there will be no serrations.

2. When installing the screen, there should be a gap of 2-5mm between the screen and the product to avoid sticking the screen, depending on the size and pattern size. The main screen version must be parallel to the front and back.

3. When screen printing and pad printing, the dust and garbage on the product surface must be removed, and electrostatic steps can be taken when necessary, so that the dust will not stick so easily.

4. After screen printing and pad printing, be sure to protect the product, avoid touching, bumping and scratching, and handle it with care.

Special products, such as hardware products, must be surface treated to remove oil, otherwise the ink on screen printing pad printing has poor adhesion and is easy to lose paint.

What is written on it is the most basic thing. I want to add that you should be careful and patient in doing anything or work, and basic skills are very important. The more things and products you do, the more experience you have.