How to reconcile ku band of Asia 5 and Andhadhun of Asia Pacific 5?

Ku-band debugging of Asia 5 is the same as that of Asia Pacific 5 tuner. Ku-band debugging method for Asia No.5;

1. Assemble the antenna according to the drawing. Note that the nuts of the four elevation adjustment screws of the central defender antenna should be on the outside, and no fixed bracket should be installed.

2. Fix the antenna column and adjust the height of the column so that the antenna surface is not blocked by the balcony. If the outdoor wind is strong, try to install it away from the northwest wind. It is best to use the low-base flip-chip method, press the thick iron plate, stone or bagged sand on the chassis, or paste 10 related documents on you.

3. Fixed antenna elevation.

4. Adjust the polarization angle of the tuner. Just point the tuner connector to the time (clock) position.

5. The length of feeder should be 30% allowance. F head is fixed at both ends, and the high frequency head is connected reliably.